need help- Interarms 22 ATD

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
pwl44m
Advanced Levergunner
Posts: 3613
Joined: Sat Sep 04, 2010 7:48 pm
Location: East Linda Caif.

need help- Interarms 22 ATD

Post by pwl44m »

My Neighbor has an Interarms 22 atd with a broken Mag Tube. He dropped the Gun and snapped the tube off in the receiver. He got the short piece out but needs a new tube. I have searched the net to no avail. Can't even find anyone that has parts for interarms atd. If U could help with a web site or anything that would help Me get the part it would be greatly appreciated. Do I understand correctly that interarms is now Rossi ? I have searched for Rossi also.
Perry
Perry in Bangor----++++===Calif
Nate Kiowa Jones
Site Sponsor
Posts: 2507
Joined: Fri Sep 07, 2007 12:05 pm
Location: Lampasas, Texas
Contact:

Re: need help- Interarms 22 ATD

Post by Nate Kiowa Jones »

pwl44m wrote:My Neighbor has an Interarms 22 atd with a broken Mag Tube. He dropped the Gun and snapped the tube off in the receiver. He got the short piece out but needs a new tube. I have searched the net to no avail. Can't even find anyone that has parts for interarms atd. If U could help with a web site or anything that would help Me get the part it would be greatly appreciated. Do I understand correctly that interarms is now Rossi ? I have searched for Rossi also.
Perry
Hi Perry,
Interarms was just the importer. That gun was a copy of the Browning Semi Auto 22 made in China exported here by Norinco. Parts are out there and some of the Browning parts will work, but I don't know which.

I did find this?
Brownells Gunsmith Kinks® - Kink for Interarms/Norinco .22 Semi-Auto Rifle
Steve Young aka Nate Kiowa Jones Sass# 6765

Steve's Guns aka "Rossi 92 Specialists"
205 Antler lane
Lampasas, Texas 76550


http://www.stevesgunz.com

Email; steve@stevesgunz.com

Tel: 512-564-1015

Image
pwl44m
Advanced Levergunner
Posts: 3613
Joined: Sat Sep 04, 2010 7:48 pm
Location: East Linda Caif.

Re: need help- Interarms 22 ATD

Post by pwl44m »

Thx Nate, now the only question is will the Browning Outer Mag tube work on the interarms. If the guy wants to pay for it I will order it. $19.99 plus $7.95 shipping. Pretty simple operation to install.
Perry
Perry in Bangor----++++===Calif
Pete44ru
Advanced Levergunner
Posts: 11242
Joined: Sun Sep 02, 2007 7:26 am

Re: need help- Interarms 22 ATD

Post by Pete44ru »

.

Sarco carries the Norinco ATD-22 parts, including the outer magazine tube (pt# ATD048)

http://www.sarcoinc.com/atd.html


.
pwl44m
Advanced Levergunner
Posts: 3613
Joined: Sat Sep 04, 2010 7:48 pm
Location: East Linda Caif.

Re: need help- Interarms 22 ATD

Post by pwl44m »

Thx Pete, went to that site and they don't list the tube for sale. It is shown in the diagram but not in the price list.
Perry
Perry in Bangor----++++===Calif
Mescalero
Advanced Levergunner
Posts: 6180
Joined: Tue Nov 02, 2010 12:21 pm

Re: need help- Interarms 22 ATD

Post by Mescalero »

Might require some ingenuity but brownells sells basic ones that people adapt.
pwl44m
Advanced Levergunner
Posts: 3613
Joined: Sat Sep 04, 2010 7:48 pm
Location: East Linda Caif.

Re: need help- Interarms 22 ATD

Post by pwl44m »

Thx Mescalero, I found the one at Brownells for a Browning, didn't see anything else listed.
Perry
Perry in Bangor----++++===Calif
Hagler
Senior Levergunner
Posts: 1522
Joined: Sun Apr 15, 2007 12:52 am
Location: Leverland, U.S.A.
Contact:

Re: need help- Interarms 22 ATD

Post by Hagler »

Perry,

Have you tried M&M Gunsmithing?:

http://www.mmgunsmithing.com/

Shawn
"That's right, Billy, I'm good with it. I hit what I shoot at, and I'm fast!"-Lucas McCain, c1882.
ImageImage
williamranks
Levergunner 3.0
Posts: 596
Joined: Sun Sep 16, 2007 9:09 am
Location: Camp Verde, AZ

Re: need help- Interarms 22 ATD

Post by williamranks »

I've got one and have a question. On the Browning the cartridge guide spring has a leg that fits into a hole in the receiver to retain it. On my ATD there is no hole and the leg of the spring is pointed down toward the bolt. What is yours like?
Got mine at a gun show for $50 and the PO said it wouldn't feed consistently. When I took it apart everything inside was yellow with cosmoline.
Cleaned out the cosmoline and it feeds fine.
Bill Ranks
I never learned from a man who agreed with me.
Robert A. Heinlein
Pete44ru
Advanced Levergunner
Posts: 11242
Joined: Sun Sep 02, 2007 7:26 am

Re: need help- Interarms 22 ATD

Post by Pete44ru »

pwl44m wrote:Thx Pete, went to that site and they don't list the tube for sale. It is shown in the diagram but not in the price list.
Perry

FWIW, It's been my experience that some companies de-list whatever, as if not available, when their inventory runs too low to be bothered - even though there may still be 1 or 2 of whatever left in the part bins.

I would suggest you either call or email Sarco with your wants before giving up on them.

Additionally, I've found that when I actually contact a company, if they really don't have what I want, they will sometimes refer me to anouther source.


.
Hagler
Senior Levergunner
Posts: 1522
Joined: Sun Apr 15, 2007 12:52 am
Location: Leverland, U.S.A.
Contact:

Re: need help- Interarms 22 ATD

Post by Hagler »

...because http://www.mmgunsmithing.com/ used to be the warranty repair center for INTERARMS, and they still handle a lot of their parts:
M&M Gunsmithing is a shop offering a full line of gunsmithing services.
Our gunsmith is a graduate of the Pennsylvania School who was employed as a gunsmith at Interarms for nearly 15 years and has vast experience with their firearms (Rossi, Star, Walther, Mark X, Astra, Va. Dragoon, FEG, Helwan, Bersa, Bernardelli). Repair and custom work is offered for all manufactures.
Shawn
"That's right, Billy, I'm good with it. I hit what I shoot at, and I'm fast!"-Lucas McCain, c1882.
ImageImage
pwl44m
Advanced Levergunner
Posts: 3613
Joined: Sat Sep 04, 2010 7:48 pm
Location: East Linda Caif.

Re: need help- Interarms 22 ATD

Post by pwl44m »

Thx Shawn, I sent Them an e-mail.
@ williamranks, I haven't seen the inside of the Gun yet. If I get the part for Him I will try to remember to check on that unless Someone else can address Ur question.
Perry
Perry in Bangor----++++===Calif
pwl44m
Advanced Levergunner
Posts: 3613
Joined: Sat Sep 04, 2010 7:48 pm
Location: East Linda Caif.

Re: need help- Interarms 22 ATD

Post by pwl44m »

Got an e-mail from M&M, He makes the tubes. $30+$7.95sh+$3 credit card use. I will see what the Guy wants to do. Thx Shawn for the link.
One little kink, M&M says it needs to be fitted and installed by a competent Gunsmith for safety and function ! Anybody know one in Marysville ?
Perry
Perry in Bangor----++++===Calif
Post Reply