.300 savage loads

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
JeffG
Levergunner 1.0
Posts: 64
Joined: Thu Dec 20, 2007 7:11 pm
Location: Upstate NY

.300 savage loads

Post by JeffG »

my brother-in-law offered to do some re-loads for me, what are your recommendations. thanks!
There are only two ways to live your life.
One is as though nothing is a miracle.
The other is as though everything is a miracle

-Albert Einstein
Top
32-20
Levergunner
Posts: 39
Joined: Wed Dec 19, 2007 2:32 pm
Location: Potter co. Pa

Post by 32-20 »

I have found 40gr. of IMR4064 with a 150gr Hornaday spire point bullet to be very accurate in my 300sav.
Top
Wes
Levergunner 2.0
Posts: 266
Joined: Thu Feb 21, 2008 12:24 pm
Location: Wyoming

Post by Wes »

Mine both shoot RL-15 real well. In fact, every one I've loaded for likes it. I shoot 45 grains with 150 and 44 grains with 165 grainers (both are Corlokt). One rifle will shoot these at an inch quite a lot and sometimes smaller groups and the velocity in my 24" barrels is 2618 fps with the 165 load. The other will keep them in 1 1/2" all day long. This powder meters real well also.
Top
User avatar
Jayhawker
Levergunner 2.0
Posts: 313
Joined: Mon Sep 03, 2007 4:47 pm
Location: Missouri

Post by Jayhawker »

I like RL15 as well. 42-42.5 grains under a 165 grain Corelokt seems to work just fine and accuracy is pretty good.
Well done is better than well said.
Top
Tumbleweeds
Levergunner 1.0
Posts: 63
Joined: Mon Sep 24, 2007 1:09 pm
Location: Springfield MO

What bullet weight are you planning?

Post by Tumbleweeds »

Might make a difference.
Top
Post Reply

Return to “General Discussion”