another newb on board

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
flopshot
Levergunner
Posts: 3
Joined: Sun Feb 10, 2013 9:24 am

another newb on board

Post by flopshot »

Good morning gentlemen. I've been looking at acquiring a lever and matching wheel gun for some time now and came here to absorb some of your wisdom. i'm parting with some EBRs and kits to fund the move to a pair in .38/.357. I want the flexibility of the pistol caliber and I'm not looking for collector grade or other finer points of the pair. These will be tools and dependability is key. I've cruised the site a bit and like what i see in the political topics and you all seem firmly planted. Since my needs are utilitarian a used rifle is definitely on the table. Any advise you have on the pros and cons of mag capacity / type, length, actions will be greatly appreciated. I'm severely ignorant on the subject of lever actions with my collection consisting of mostly semi autos with the exception of a few bolts and pumps so i hope you'll go easy on me. :mrgreen:
pshort
Levergunner 3.0
Posts: 586
Joined: Fri Mar 30, 2007 10:43 am
Location: Central Minnesota

Re: another newb on board

Post by pshort »

Howdy Flop,
Welcome to the board!!
I think you're on the right track.. There're lots of opinions out there and I'm sure you'll hear a few! I've picked up on the .357 and think it's a pretty good all-around cartridge..
I guess a Ruger Blackhawk and a '92 of some sort would take care of you!

Paul
"Pain plants the flag of reality in the
fortress of a rebel soul"
Bill in Oregon
Advanced Levergunner
Posts: 8849
Joined: Sun Jun 29, 2008 10:05 am
Location: Sweetwater, TX

Re: another newb on board

Post by Bill in Oregon »

Yeah, welcome Flop! You're getting sound advice. I like Marlins, but in the pistol cartridges I give the nod to the Winchester 92 clones. If you can scare up one of the older Rossi Pumas in .38/.357 for a good price, you will be set. The Blackhawks are hell for stout, but in this caliber all of the Colt clones are up to the task.
And if you want your rifle slicked up, look no further than Nate Kiowa Jones here, who owns stevesgunz, 92 specialists.
jnyork
Advanced Levergunner
Posts: 4412
Joined: Wed Sep 12, 2007 12:33 pm
Location: Wyoming and Arizona

Re: another newb on board

Post by jnyork »

Asking which is the best gun for you is like asking what is the best flavor of ice cream for you. :lol:

It's all a matter of preference. You have already decided on the cartridge, so that's a step in the right direction. For the revolver, Uberti makes very nice Peacemaker models, well built and dependable. You need to figure out what barrel length works for you. There are, of course, several other makers, you might drop in to a well-stocked gun shop in your area and just educate yourself by handling several and deciding which shows the best workmanship, etc.

For the rifle, well, that's another story, there are so many different models it will take you a month to sort through them all. First, I would decide on barrel lenght. I personally favor a 24" barrel, but that is because I am a silhouette target shooter using iron sights, I need all the sight radius I can get and the longer barrel is tad bit steadier in offhand due to the extra weight out front. If you are looking for a truck gun or a hunting gun, a shorter barrel will likely be better for you.

It has been my experience that any of the Winchester Model 92 copies you get, from the most expensive to the cheapest, will need some tuning, you dont have to look very far on this board to find threads concerning these problems. I have a Rossi (Puma) copy and after tuning using the Steve's Gunz video CD tutorial, available on this board, It works very well for me and I am quite pleased with the function and accuracy. Again, try to examine a few and get educated a little.

Browse around for a while over at Gunbroker, study the offerings and completed sales, this will give you a good idea of what you should be paying.
User avatar
Old Savage
Posting leader...
Posts: 16686
Joined: Mon Sep 03, 2007 3:43 pm
Location: Southern California

Re: another newb on board

Post by Old Savage »

Welcome - well flop at one post and Bill in Oregon at a 1000 right now. :)

Rossi or Marlin, there are good examples of either and Stevesgunz Nate Kiowa Jones here does fine work.
In the High Desert of Southern Calif. ..."on the cutting edge of going back in time"...

Image
User avatar
Griff
Posting leader...
Posts: 20803
Joined: Sat Mar 31, 2007 4:56 pm
Location: OH MY GAWD they installed a STOP light!!!

Re: another newb on board

Post by Griff »

Imageand Welcome to THE Forum from Texas!
flopshot wrote:Good morning gentlemen. I've been looking at acquiring a lever and matching wheel gun for some time now and came here to absorb some of your wisdom. i'm parting with some EBRs and kits to fund the move to a pair in .38/.357. I want the flexibility of the pistol caliber and I'm not looking for collector grade or other finer points of the pair. These will be tools and dependability is key. I've cruised the site a bit and like what i see in the political topics and you all seem firmly planted. Since my needs are utilitarian a used rifle is definitely on the table. Any advise you have on the pros and cons of mag capacity / type, length, actions will be greatly appreciated. I'm severely ignorant on the subject of lever actions with my collection consisting of mostly semi autos with the exception of a few bolts and pumps so i hope you'll go easy on me. :mrgreen:
Man, what a loaded question!

Image

1st: For most practical applications... bigger is better! But, if you already have a pistol caliber you load for, a lever and wheel gun in that same caliber is a warranted consideration. I've had and have lever guns and wheelguns in .38/.357, .44Mag, & .45 Colt. In fact as I was cleaning up my reloading shop, I found cases in .44Spl, .44Mag, .44WCF, .41 Long Colt, .38 S&W Short & Long, and .32 S&W! The first two are no longer in my collection... and I've actually never had a .44WCF or a .41LC! Must have come from "range brass"! (Might have to rectify that now that I have brass)!!! :P Let me get this off my chest, the .38/.357 leverguns seem to have the most trouble with feeding issues. That is probably based on the fact that most levergun designs were meant to be used with specific length bottleneck cartridge. Most pistol calibers of the day being around 1.6" in length. However, that said, I've never met a rifle that couldn't be fixed, i.e. tuned to reliably feed that cartridge. Over the several years I've been on this forum and it's predecessor, there've been at least a couple hundred posts with issues, all that I recall have been diagnosed and a fix described. There might be one or two exceptions... but... just sayin'.

2nd: "Trapper" length, carbine length and rifle length leverguns all have their proponents, detractors and ergo, their good and bad points. It just really depends on what you'd like. To define the terms, a- levergun "Carbines" generally refer to guns in the 20" range, some shorter, some longer, but generally they have barrel bands around the forend and muzzle; along with a gentler curved buttplate, modern version are usually plastic see 1st pic below. b- rifles generally don't have barrel bands, barrels are usually in excess of 22", but you'll see "short rifles" also, see pictures 2 & 3; rifles will have a "forend cap" and a barrel hanger for the mag tube. "Trappers" are generally a 16" or less carbine, see picture 4. Each has their carry, handling and ballistic differences. Tho' ballistically, in pistol calibers they're not quite as distinct as they are in rifle calibers. I generally feel any of the pistol caliber leverguns as limited to about 100 yard capable, depending on exact sights and your loads.

Image

Image

Image

Image

As for brands, well... let me just say that it's a Ford vs. Chevy thing! And, remember the adage, "Friends don't let Friends drive Fords!" (Chevy might be interchangeable in this instance)! I've a Winchester fan, although I own a few Marlins, (3 to be exact). Each has it's postives and negatives. However, for ease of cleaning, the Marlin has it all over the Winchester. However, I find no difficulty in cleaning any of my leverguns, be it with straight rod or bore snake. The Winchesters seem to balance better in my hand, important if you carry it in the hand, not slung over the back; that lever pivot on the Marlin seems to be always right where it balances for one handed carry!

BUT... for the important detail, regardless of what brand you select, there is really only one model of each that is really the best; for the Winchester that is the mdl 1892, and in Marlin's line-up, it is the mdl 1894! Those two were designed for that length of cartridge, which is an important consideration IMO, as they don't have extreme adaptions to accomodate the .38/.357. However, because they are adapted to fire the .38Spl AND the .357 Magnum, which are two different lengths, they have been made with a sorta "in-between" thinking. Meaning that the actions have been tuned to really run between the two extremes, not necessarily one or the other. One the Marlin, it's a timing issue, and the Winchester (or it's clones), it's a gulde rail issue. In most hunting situations, these don't really show up. But, in cowboy action shooting, which is more abuse than either of these designs were meant to handle, it readily became important, where speed is king, and accuracy takes a slight back seat. But, as I said, either is fully able to accomodate either cartridges, although a particular example of either might show a preference for a particular length cartridge.

There are other options as to model, depending on whether you intend to shoot .38Spls or .357 Mags. This would be the toggle-link Winchester mdl '73, made by Uberti in .38/.357. Even tho' it's chambered in .357, I just don't recommend a steady diet of full-house .357s. The Marlin and Winch. 1892 are much stronger designs... the 1892 being the stronger of the last two, IMO.

Another important consideration is pricing. A market factor to consider is that the drop in the value of the American $ has led to an increase in cost of the Uberti imports, driving them over $1200 for a new one. The Marlin is easily slicked up and can be made to run just as fast as a slicked-up, short-stroked Uberti for about ½ the cost. The new "Rem-lins" are trashed talked to death, so used Marlins have become relatively scarce as more cowboy action shooters are looking for them. The Rossi copy of the Winchester 1892 is still the bargain-basement bargain. And with a little help from Nate Kiowa Jones' DVD or Marauder's Rifle Tips, or even from members here, it is easily, IMO, the best bargain out there.
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93

There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
GoatGuy
Senior Levergunner
Posts: 1002
Joined: Tue Dec 11, 2007 1:28 pm
Location: Arkansas Ozark Mts

Re: another newb on board

Post by GoatGuy »

Welcome flopshot! Good advice so far on the Rossi 92's and OLDER Marlins in .357 caliber. My choice would be a 92 in the 20" version. Handgun choice would be the discontinued S&W Model 28, Highway Patrolman. They're tough as nails and real hard working double action revolvers. There's scads of them out there, in either the 4 or 6 inch version. Not too terribly pricey compared to most old style S&W's models at this time. To me that duo would most perfectly meet your needs as you outlined.

Good luck in your pursuit. Stick around here as often as you can, you're amongst friends.
"If a man does away with his traditional way of living and throws away his good customs, he had better first make certain that he has something of value to replace them." - Basuto proverb.
User avatar
ollogger
Advanced Levergunner
Posts: 2794
Joined: Mon Jul 05, 2010 2:47 pm
Location: Wheatland Wyoming
Contact:

Re: another newb on board

Post by ollogger »

Howling windy Wyoming Welcome

357 combos are a good choice, you got good advice on the 92s
also my fav. is the 92 in 45 & a Ruger to boot
my next fav. is gonna be a pair of 38-40s
It never ends



ollogger
User avatar
Griff
Posting leader...
Posts: 20803
Joined: Sat Mar 31, 2007 4:56 pm
Location: OH MY GAWD they installed a STOP light!!!

Re: another newb on board

Post by Griff »

Oh yeah, what njyork said. As is my advice to new cowboy action shooters, "try before you buy"! Whether you think cowboy action shooting is in your future or not... find a match in your area and go out and visit. You're likely to find a larger variety of leverguns and sixguns than at any LBS devoted to guns! Express an interest, and you're likely to be invited to try! Folks have rifles, carbines, trappers, Rugers, Colts, clones galore, and most likely in a variety of calibers also. Just remember, they're going to be shootin' somewhat reduced loads and light bullets for caliber... remember, they're going to speed (for the most part). :P But, it'll certainly give you a idea of what the handling is like.
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93

There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
User avatar
AJMD429
Posting leader...
Posts: 31932
Joined: Sun Sep 09, 2007 10:03 am
Location: Hoosierland
Contact:

Re: another newb on board

Post by AJMD429 »

Welcome.
(searchfor = tonsofnightscouts)
For my 'do it all' or 'go-to' guns, I've come down to my self-labeled 'Night Scout' leverguns, and the first one I made was a .357 Mag Marlin, since that's what I had available. Then I wanted a larger-hole maker for inside-the-house use for my wife, and had a .45 Colt Rossi, so I used the '92 clone' to make that one. BOTH are nice and work well day or night. I wanted to make a .44 Mag one so I'd have all the 'pistol calibers' but in the process of making one out of my old .44 Mag Marlin, I converted it to .45 Colt just because I always wanted a .45 Colt in the Marlin action (which I do like better than the Rossi/Winchester one), and came across a $100 barrel with which to do so.

So - I have used both the 1894 and the 1892 actions as my primary/utility rifles around the home/farm, and both work well. Ease and flexibility of the sight-mounting is the strength of the Marlin, plus fewer parts that seem less individually-fitted. I'll likely not wear out any of my 92's during my lifetime though (but I do dread losing a small part if and when I actually need to take one apart totally).

Here's my three 'Night Scouts':

The first one - .357 Mag Marlin 1894 - http://www.levergunscommunity.com/viewt ... =1&t=23531
Image


The second one - .45 Colt Rossi 1892 - http://www.levergunscommunity.com/viewt ... =1&t=31062
Image


The third one - .44 Mag (at first) Marlin 1894 - http://www.levergunscommunity.com/viewt ... =1&t=40663
Image

The second picture is without the light attached (same light can go on any of the above). Folks snicker at the non-traditional sights and 'clumsy' light, but for ME it is far better than a night-sighted AR-15 for the kinds of varmints we deal with on the farm. A fancy EBR AR-15 with bulky night-sights would cost more than all three of these leverguns put together, and require hearing protectors if I dared actually fire it; I'm NOT going to go out to check the livestock wearing hearing protectors, and I want something light, compact, and durable, that won't shoot 2 miles if I did do the bad thing and take a poor-backstop shot and miss.

This was shot with the above .357 at midnight at 50 yards... 8)
Image

Without the 'light' all three setups are pretty compact and handy.

The .357's light mount just 'snaps' on and off, as it is made of plastic electric conduit.
Image

I actually DO have a similarly-set up (for 'night' use) Ruger 10/22 that does work well when I know the only varmint I may encounter is a raccoon in the chicken-coop, but for coyotes or 2-legged predators I'd want one of the leverguns.
Image

Again, it "looks funny" and reminds me of the geeked-out stuff you see guys set up who don't actually shoot anything but imaginary zombies, but it has accounted for many, many possums and raccoons and feral canines at ranges out to 75 yards that I encountered at night, and would never have been able to humanely eliminate (one shot kills 90% of the time, rapid followup easy if needed) with ANY other setup I've tried. The lights I use are now Lowe's building supply store bought 'Coast' brand LED ones that I lock on 'spot' instead of 'flood' (by positioning the front 30mm ring so it keeps the sliding lens forward), and at 500 lumens for the larger-bell ones, or 280 lumens for the more compact ones, they will make a raccoon easy to see at 100 yards).

While if you can afford it, I'd keep an EBR around, since they do have more 'firepower' and are definitely going to appreciate in value as trade items, your choice of a .357 Mag levergun is PERFECT for most real-world scenarios right now. As to the Marlin vs. Winchester/clone, (or don't forget Henry, Savage, Ruger, etc...), both work fine. The 92's are probably 'slicker' and the Marlins are easier to put different sights on.
Last edited by AJMD429 on Tue Sep 22, 2015 6:38 am, edited 6 times in total.
Doctors for Sensible Gun Laws
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.


Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
User avatar
JReed
Advanced Levergunner
Posts: 5509
Joined: Tue Apr 03, 2007 11:17 am
Location: SoCal

Re: another newb on board

Post by JReed »

Welcome aboard the others about said it in regards to advice.
Jeremy
GySgt USMC Ret

To err is human, To forgive is devine, Neither of which is Marine Corps policy
Semper Fidelis
flopshot
Levergunner
Posts: 3
Joined: Sun Feb 10, 2013 9:24 am

Re: another newb on board

Post by flopshot »

yeah, can of worms it was. might as well have stirred the AR vs AK pot. i probably should have asked what stay away from. i figured this would be a good time to unload some AK kits and see if i could get a deal on a lever or wheel gun. so far revolvers are still in demand. i see plenty of 94's and Marlins on the racks but they're all 30-30s. i'm also partnering with my brother in law on a reloading setup since neither one of us wants to shoot from our stash right now. i'll take some notes and hit Gunbroker. a tactical lever gun,,,, whooda thunk it ? you guys are sure loaded with info, thanks !
pwl44m
Advanced Levergunner
Posts: 3613
Joined: Sat Sep 04, 2010 7:48 pm
Location: East Linda Caif.

Re: another newb on board

Post by pwl44m »

Welcome, I know Nuthink, I'm just here for the ride. Iv'e got combos in just about all the popular calibers ( 357,44,38 only,45 colt,38-40, 9mm).
Perry
Perry in Bangor----++++===Calif
User avatar
Ysabel Kid
Moderator
Posts: 27790
Joined: Mon Sep 17, 2007 7:10 pm
Location: South Carolina, USA
Contact:

Re: another newb on board

Post by Ysabel Kid »

Welcome to the fire! :D
Image
3leggedturtle
Advanced Levergunner
Posts: 4145
Joined: Fri Dec 21, 2007 11:34 am
Location: north of Palacios about 1400 miles

Re: another newb on board

Post by 3leggedturtle »

Welcome aboard. 3 things I can think of. 1st, If your wanting advice on if you should buy a rifle or pistol, the answer is Yes you should. 2nd. If you need help deciding between Rifle A and Rifle B, the answer is, you need to Buy both of'em. 3rd, Every rifle needs a companion piece, whether it the same caliber or a complimentary one, I.E. 45/70 and 22LR or 22LR and 357mag/45colt. or 357M and 357M or 45C and 45C. There will be a few others on here with better advice, so hope you enjoy the fire and coffee. Todd / 3leg
30/30 Winchester: Not accurate enough fer varmints, barely adequate for small deer; BUT In a 10" to 14" barrelled pistol; is good for moose/elk to 200 yards; ground squirrels to 300 metres

250 Savage... its what the 223 wishes it could be...!
User avatar
olyinaz
Advanced Levergunner
Posts: 3978
Joined: Sat Nov 28, 2009 2:19 pm
Location: Tucson, AZ

Re: another newb on board

Post by olyinaz »

Welcome! Rossi 92 and a Ruger flattop! Go gettem! :D
Cheers,
Oly

I hope and pray someday the world will learn
That fires we don't put out will bigger burn

Johnny Wright
flopshot
Levergunner
Posts: 3
Joined: Sun Feb 10, 2013 9:24 am

Re: another newb on board

Post by flopshot »

AJMD429 wrote:
So - I have used both the 1894 and the 1892 actions as my primary/utility rifles around the home/farm, and both work well. Ease and flexibility of the sight-mounting is the strength of the Marlin, plus fewer parts that seem less individually-fitted. I'll likely not wear out any of my 92's during my lifetime though (but I do dread losing a small part if and when I actually need to take one apart totally).


While if you can afford it, I'd keep an EBR around, since they do have more 'firepower' and are definitely going to appreciate in value as trade items, your choice of a .357 Mag lever gun is PERFECT for most real-world scenarios right now. As to the Marlin vs. Winchester/clone, (or don't forget Henry, Savage, Ruger, etc...), both work fine. The 92's are probably 'slicker' and the Marlins are easier to put different sights on.
Thanks AJ. So i'm not really hearing anything that would push me away from one particular model and you all seem OK with the .357 Lever/Revolver combo. What would you recommend as far as repair and maintenance parts for most lever action rifles ? As far as the EBRs go, that's not a problem unless you count the lack of space in my safe. I more or less consider my ARs and Glocks in the same light as the jack in my truck. The AKs, well, they're just cool to play with.
Post Reply