Leather Lever Wraps.......Done!

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
rbertalotto
Senior Levergunner
Posts: 1232
Joined: Thu Sep 17, 2009 3:45 pm
Location: Dartmouth, MA
Contact:

Leather Lever Wraps.......Done!

Post by rbertalotto »

I ordered two Leather Lever Wraps from Ricochet Roy, http://www.rroldwest.com/.

$20 each, including shipping and the needles and waxed thread to install them.

One for my 1892 Rossi and one for my 1873 Uberti.........

With instructions supplied, I installed both of them within 15 minutes while my wife was picking out a coat to wear to dinner! I kid you not! Nothing could be easier.

Image

Image

Image

Image
Roy B
Dartmouth, MA
www.rvbprecision.com
adirondakjack
Senior Levergunner
Posts: 1925
Joined: Mon Dec 17, 2007 7:09 pm
Location: Upstate NY
Contact:

Re: Leather Lever Wraps.......Done!

Post by adirondakjack »

Looks like a good stitching job. Did ya oil em first?

I sell hundreds of wraps and always recommend folks wet the leather well with whatever oil they'd use on the outside of the gun to inhibit the potential of rust on the lever.
Certified gun nut
rbertalotto
Senior Levergunner
Posts: 1232
Joined: Thu Sep 17, 2009 3:45 pm
Location: Dartmouth, MA
Contact:

Re: Leather Lever Wraps.......Done!

Post by rbertalotto »

I didn't oil the leather, but I did spray silicone on the lever. One went on a case hardened lever and the other on a stainless lever.

Next gun I do I'm going to wrap the lever with rubber tape. The type that sticks to itself (We used to wrap baseballs with it when we were kids and couldn't afford new balls)

This tape is 100% waterproof and sticky on the outside. It will lock the leather wrap down tight with no chance of movement.

(BTW, I received the Cowboy 45 brass today.....Thanks for the quick shipping!)
Roy B
Dartmouth, MA
www.rvbprecision.com
rossim92
Senior Levergunner
Posts: 1429
Joined: Sat Jan 01, 2011 2:42 am
Location: mechanicsville, md.

Re: Leather Lever Wraps.......Done!

Post by rossim92 »

Now, that is one beautiful :D wrap. I like the smoothness of the leather. Good work! Makes we want one. (or two)!
Rossi 92 .357 lever , and a cz pcr 9mm
Henry .22 lever, Remington speedmaster 552 .22 lr
Marlin Glenfield .22 boltaction
gforce 12ga semi
Taylor's Tactical 1911 A1 FS in .45acp
winchester 1873 44.40
Marlin 336W .30.30
beeman sportsman rs2 dual caliber pellet rifle
henry .22 magnum pumpaction/octagon barrel
stag 5.56 m4 with reddot
adirondakjack
Senior Levergunner
Posts: 1925
Joined: Mon Dec 17, 2007 7:09 pm
Location: Upstate NY
Contact:

Re: Leather Lever Wraps.......Done!

Post by adirondakjack »

rbertalotto wrote:I didn't oil the leather, but I did spray silicone on the lever. One went on a case hardened lever and the other on a stainless lever.

Next gun I do I'm going to wrap the lever with rubber tape. The type that sticks to itself (We used to wrap baseballs with it when we were kids and couldn't afford new balls)

This tape is 100% waterproof and sticky on the outside. It will lock the leather wrap down tight with no chance of movement.

(BTW, I received the Cowboy 45 brass today.....Thanks for the quick shipping!)
LOL! Ya got lucky with the way the order fell in the cycle. Over the holiday season I take pity on the post office (and myself), shipping once a week.
Certified gun nut
Post Reply