OT--Ok lets make a knife
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
OT--Ok lets make a knife
Round yourself up a old pair of sheep shears and cut them in half then shape to fit handle of your choice.
Drill a couple holes in the handle for pins and epoxy it on then drill holes through the steel part for the handle.
You can peen over the pins or cut them shorter and epoxi them in.
Makes a very sharp knife as there is good steel in the shears.
Drill a couple holes in the handle for pins and epoxy it on then drill holes through the steel part for the handle.
You can peen over the pins or cut them shorter and epoxi them in.
Makes a very sharp knife as there is good steel in the shears.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
Re: OT--Ok lets make a knife
Cool Knife. Now if I can only find a pair of used sheep shears here in Beef Cattle Country!
Re: OT--Ok lets make a knife
very very kewl.
Mike Johnson,
"Only those who will risk going too far, can possibly find out how far one can go." T.S. Eliot
"Only those who will risk going too far, can possibly find out how far one can go." T.S. Eliot
- earlmck
- Advanced Levergunner
- Posts: 3437
- Joined: Tue Nov 30, 2010 12:10 am
- Location: pert-neer middle of Oregon
Re: OT--Ok lets make a knife
Now there's a knife with character, Pitchy! And a fine set of pictures, too.
And speaking of character, that ball-peen hammer looks like it has been around since Heck was a pup, or maybe before.
And speaking of character, that ball-peen hammer looks like it has been around since Heck was a pup, or maybe before.
The greatest patriot...
is he who heals the most gullies. Patrick Henry
is he who heals the most gullies. Patrick Henry
- Ysabel Kid
- Moderator
- Posts: 27876
- Joined: Mon Sep 17, 2007 7:10 pm
- Location: South Carolina, USA
- Contact:
Re: OT--Ok lets make a knife
Thanks guys, earlmck i made a little tomohawk from a ball peen hammer, here`s some pics.earlmck wrote:Now there's a knife with character, Pitchy! And a fine set of pictures, too.
And speaking of character, that ball-peen hammer looks like it has been around since Heck was a pup, or maybe before.
Then make a handle on the shaving horse.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
Re: OT--Ok lets make a knife
Way Cool
Re: OT--Ok lets make a knife
The know-how on this board astounds me.
The Rotten Fruit Always Hits The Ground First
Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
Re: OT--Ok lets make a knife
Both are cool, though I must admit I like the hatchet more. Very nice indeed.
-
- Levergunner 2.0
- Posts: 121
- Joined: Sat Dec 25, 2010 10:50 pm
Re: OT--Ok lets make a knife
I do't know. That ball peen hammer was kinda nice.
- ollogger
- Advanced Levergunner
- Posts: 2807
- Joined: Mon Jul 05, 2010 2:47 pm
- Location: Wheatland Wyoming
- Contact:
Re: OT--Ok lets make a knife
thats great work & ya make it look so easy
-
- Advanced Levergunner
- Posts: 4145
- Joined: Fri Dec 21, 2007 11:34 am
- Location: north of Palacios about 1400 miles
Re: OT--Ok lets make a knife
You make it look easy. Do you do bullet molds too?
30/30 Winchester: Not accurate enough fer varmints, barely adequate for small deer; BUT In a 10" to 14" barrelled pistol; is good for moose/elk to 200 yards; ground squirrels to 300 metres
250 Savage... its what the 223 wishes it could be...!
250 Savage... its what the 223 wishes it could be...!
-
- Advanced Levergunner
- Posts: 5670
- Joined: Mon Apr 09, 2007 7:13 pm
- Location: DeeDee Snavely's Used Guns and Weapons
Re: OT--Ok lets make a knife
That was my second thought!southfork wrote:Cool Knife. Now if I can only find a pair of used sheep shears here in Beef Cattle Country!
My first thought was "That's really cool!"
Nothing so needs reforming as other people's habits.
-Mark Twain
Proverbs 3:5; Philippians 4:13
Got to have a Jones for this
Jones for that
This running with the Joneses boy
Just ain't where it's at
-Mark Twain
Proverbs 3:5; Philippians 4:13
Got to have a Jones for this
Jones for that
This running with the Joneses boy
Just ain't where it's at
Re: OT--Ok lets make a knife
Thanks again, nope never tried bullet molds, yet3leggedturtle wrote:You make it look easy. Do you do bullet molds too?
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.