OT- Winchester/Miroku stocks
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
OT- Winchester/Miroku stocks
I probably have mentioned this before, but I sent my pistol grip, crescent butt 1886 stock to Bryan Macon for duplication. I just got off the phone with him and he is really going out of the way to get it right. He is making the stock from nicely grained walnut, except with a shotgun butt per my request. He said that he will install a 71 style butt plate with lip, too. What more could a levergunner want? BTW, I also sent him the lower tang so that the inlet will be made to exactly fit. Miroku PG tangs are actually made to use the same screw as the straight tang. Flat on top, with curve made by added metal. Strange design if you ask me.
"Congressmen who willfully take actions during wartime that damage morale, and undermine the military are saboteurs and should be arrested, exiled or hanged"....President Abraham Lincoln
Re: OT- Winchester/Miroku stocks
Probably saves them milling time. Post pictures when you get the stock .
Re: OT- Winchester/Miroku stocks
Actually not. They have to mill the stock deeper to accommodate the thicker metal of the Miroku tang. Original Winchester lower tangs are bent straight ones and need a different top screw.
"Congressmen who willfully take actions during wartime that damage morale, and undermine the military are saboteurs and should be arrested, exiled or hanged"....President Abraham Lincoln
- Griff
- Posting leader...
- Posts: 20869
- Joined: Sat Mar 31, 2007 4:56 pm
- Location: OH MY GAWD they installed a STOP light!!!
Re: OT- Winchester/Miroku stocks
Same way that Winchester was doin' the PG mdl 94s.
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
Re: OT- Winchester/Miroku stocks
Looking forward to seeing this one!
Re: OT- Winchester/Miroku stocks
Mike D. do you have any contact information for Bryan Macon? I have an 1886 that I would like to change from a Curved buttplate to a shotgun style myself. Looking forward to seeing your project done.
Regards
Regards
Re: OT- Winchester/Miroku stocks
Sure, Palmtree, here 'ya go.Palmtreee wrote:Mike D. do you have any contact information for Bryan Macon? I have an 1886 that I would like to change from a Curved buttplate to a shotgun style myself. Looking forward to seeing your project done.
Regards
Macon Gunstocks
34535 Lickingteller Ave
Warsaw, MO 65355
Tel: 660-438-4699
Email: macongunstocks@dishmail.net
www.macongunstocks.net
"Congressmen who willfully take actions during wartime that damage morale, and undermine the military are saboteurs and should be arrested, exiled or hanged"....President Abraham Lincoln
Re: OT- Winchester/Miroku stocks
I just received a call from Vicki Macon and she stated that making the stock that I want will be no problem. PG to fit the Miroku tang and shotgun butt with deluxe plate with the lip like seen of 71s. The cost to me will be $85. I can't wait to get it and go to work doing the final fit and finish.
"Congressmen who willfully take actions during wartime that damage morale, and undermine the military are saboteurs and should be arrested, exiled or hanged"....President Abraham Lincoln
Re: OT- Winchester/Miroku stocks
Hey Mike, is the cost of duplication $85? I talked to george over at treebone and he wanted close to $1000 so if this is the case thats a deal and a half. Lemme know.
g rice
Re: OT- Winchester/Miroku stocks
She indicated to me and per my conversations with Bryan that the total cost would be 85 bucks. He's going to send me an invoice detailing the work so that I know exactly what he's doing. He even told me that hi might even mount the buttplate for me. He wished that he had the rifle so that his fitter could do it perfectly. his business is doing so well that he has been able to hire some craftsmen from Fajen's and other stock makers. He is very satisfied with the employees he has and guarantees his work for an indefinite time. I expect that any wood from him will be excellent. I should know in a few weeks.
"Congressmen who willfully take actions during wartime that damage morale, and undermine the military are saboteurs and should be arrested, exiled or hanged"....President Abraham Lincoln
Re: OT- Winchester/Miroku stocks
Mike D. wrote:She indicated to me and per my conversations with Bryan that the total cost would be 85 bucks. He's going to send me an invoice detailing the work so that I know exactly what he's doing. He even told me that hi might even mount the buttplate for me. He wished that he had the rifle so that his fitter could do it perfectly. his business is doing so well that he has been able to hire some craftsmen from Fajen's and other stock makers. He is very satisfied with the employees he has and guarantees his work for an indefinite time. I expect that any wood from him will be excellent. I should know in a few weeks.
Expect the wood to be first rate as I bought a replacement stock from him for my sons stevens 311 sxs, took a little work fitting the buttstock and forearm but im very satisfied with it, im sure youre new wood will look great, im going to call him about some wood for my browning 1886.
g rice
Re: OT- Winchester/Miroku stocks
Marlin does their straight vs pistol grip stocks the same way, makes for easy interchangeability.
Re: OT- Winchester/Miroku stocks
Any word on this project?
- kimwcook
- Advanced Levergunner
- Posts: 7978
- Joined: Tue Sep 04, 2007 10:01 pm
- Location: Soap Lake, WA., U.S.A.
Re: OT- Winchester/Miroku stocks
Can't wait to see the finished product and what it set ya back.
I've got a couple of SxS shotguns that need some new wood. Plus, I've thought about replacing the crescent butt on my Miroku '86 to shotgun.
I've got a couple of SxS shotguns that need some new wood. Plus, I've thought about replacing the crescent butt on my Miroku '86 to shotgun.
Old Law Dawg
Re: OT- Winchester/Miroku stocks
No word as of today. I'm going hunting, but don't expect to hear about it for a few more weeks.
"Congressmen who willfully take actions during wartime that damage morale, and undermine the military are saboteurs and should be arrested, exiled or hanged"....President Abraham Lincoln
Re: OT- Winchester/Miroku stocks
$85.00 is a steal! I wouldn't mind having a shotgun butt stock on my 1895. It only has about a 13" LOP with the crescent butt. I don't understand that because my 1873 is longer.
Good luck on your deer hunt! We are planning to go into the back country next week.
Good luck on your deer hunt! We are planning to go into the back country next week.
My "HB" (Hunting Buddy) She's a good cook too!
Re: OT- Winchester/Miroku stocks
I'll be down at San Benito in about 3 hours. I'm only trying to bag another small buck to make into jerky. Our freezer's got plenty venison already and I still have the late October trophy hunt to attend.
"Congressmen who willfully take actions during wartime that damage morale, and undermine the military are saboteurs and should be arrested, exiled or hanged"....President Abraham Lincoln