PAY IT FORWARD

The place to post items FOR SALE, WANTED TO BUY, WANTED TO TRADE, or AUCTION ALERTS.

Moderators: Hobie, rjohns94

Post Reply
txbirdman
Levergunner
Posts: 18
Joined: Thu Mar 06, 2008 1:32 pm

Re: PAY IT FORWARD

Post by txbirdman »

Didn't know for sure if anyone on this forum would be interested in this item but after reading about Sixgun's new AR I'm putting up for grabs an AR15 Panther Practical Grip.

Also a big "thank you" to Travis
txbirdman
Levergunner
Posts: 18
Joined: Thu Mar 06, 2008 1:32 pm

Re: PAY IT FORWARD

Post by txbirdman »

John,

That Panther grip is all your's. I'll get it sent to you early this week.
Bang
Levergunner
Posts: 40
Joined: Wed Feb 25, 2009 6:55 pm
Location: Australia, Melbourne
Contact:

Re: PAY IT FORWARD

Post by Bang »

I live in the land of surplus British SMLE's No1Mk111* - anyone need parts let me know.
I wish to die like my grandmother - peacefully in her sleep.
Not screaming like the passengers in her car !

Is there a 21st Century lever action?
Travis Morgan
Senior Levergunner
Posts: 1581
Joined: Sun Dec 30, 2007 6:59 pm
Contact:

Re: PAY IT FORWARD

Post by Travis Morgan »

Birdman,

.41 Mag. dies should be there by Tuesday or Wednesday. BTW, Blizzards this late in the year TOTALLY suck!
Hunter Ed. instructor
NRA Basic pistol Inst.
NRA Personal protection inst.
NRA Range safety officer


Blessed is the man that walketh not in the counsel of the ungodly, nor standeth in the way of sinners, nor sitteth in the seat of the scornful. But his delight is in the law of the LORD; and in his law doth he meditate day and night. Psalm 1
Travis Morgan
Senior Levergunner
Posts: 1581
Joined: Sun Dec 30, 2007 6:59 pm
Contact:

Re: PAY IT FORWARD

Post by Travis Morgan »

Also, anyone have a front sight insert for a Winchester 94 with the ramp front sight? I bought one at the last gun show, but lost it somewhere! :oops:
Hunter Ed. instructor
NRA Basic pistol Inst.
NRA Personal protection inst.
NRA Range safety officer


Blessed is the man that walketh not in the counsel of the ungodly, nor standeth in the way of sinners, nor sitteth in the seat of the scornful. But his delight is in the law of the LORD; and in his law doth he meditate day and night. Psalm 1
Travis Morgan
Senior Levergunner
Posts: 1581
Joined: Sun Dec 30, 2007 6:59 pm
Contact:

Re: PAY IT FORWARD

Post by Travis Morgan »

Okay, let's get this thing rollin' again! I'll donate:

100 gas checked, alox lubed .30 caliber bullets sized .309" or .312" in either a spitzer or round nosed flat point design. (Or half and half, or you can just claim twenty or fifty, so they get spread around!)

50 .454" sized, alox lubed Keith bullets (It's a one cavity mold)

100 RNFP alox lubed bullets, sized .451" or .452". (They aren't big enough for a .454" sizer.)

NOW, someone else throw somethin' in! :lol: We're all broke, but we can keep morale up!
Hunter Ed. instructor
NRA Basic pistol Inst.
NRA Personal protection inst.
NRA Range safety officer


Blessed is the man that walketh not in the counsel of the ungodly, nor standeth in the way of sinners, nor sitteth in the seat of the scornful. But his delight is in the law of the LORD; and in his law doth he meditate day and night. Psalm 1
User avatar
AmBraCol
Webservant
Posts: 3651
Joined: Fri Mar 30, 2007 8:12 am
Location: The Center of God's Grace
Contact:

Re: PAY IT FORWARD

Post by AmBraCol »

Travis, I'll take the 100 RNFP .452" bullets - mailed to MO.


I'll put up two pounds of genuine Colombian coffee - best grade we can get. Your choice of whole bean or Colombian grind - this won't get mailed until the last week of May or first week of June when we get to the US...
Paul - in Pereira


"He is the best friend of American liberty who is most sincere and active in promoting true and undefiled religion." -- John Witherspoon

http://www.paulmoreland.com
http://www.pistolpackingpreachers.us
http://www.precisionandina.com
alnitak
Senior Levergunner
Posts: 1775
Joined: Tue Sep 04, 2007 7:13 am
Location: Virginia

Re: PAY IT FORWARD

Post by alnitak »

I'll take the coffee...whole bean please. I'll PIF with 100 9mm cases, cleaned and deprimed.
"From birth 'til death...we travel between the eternities." -- Print Ritter in Broken Trail
User avatar
AmBraCol
Webservant
Posts: 3651
Joined: Fri Mar 30, 2007 8:12 am
Location: The Center of God's Grace
Contact:

Re: PAY IT FORWARD

Post by AmBraCol »

alnitak wrote:I'll take the coffee...whole bean please. I'll PIF with 100 9mm cases, cleaned and deprimed.

OK. Good choice. :) I'll pick it up from "El Templo Del Café" right before we leave so it'll be as fresh as possible. Again, this will be mailed the last week of May or so... Need an address to mail it to.
Paul - in Pereira


"He is the best friend of American liberty who is most sincere and active in promoting true and undefiled religion." -- John Witherspoon

http://www.paulmoreland.com
http://www.pistolpackingpreachers.us
http://www.precisionandina.com
alnitak
Senior Levergunner
Posts: 1775
Joined: Tue Sep 04, 2007 7:13 am
Location: Virginia

Re: PAY IT FORWARD

Post by alnitak »

Thank you. I understand the timeframe, and no rush (obviously). Will PM you with address.

Thanks again!!
"From birth 'til death...we travel between the eternities." -- Print Ritter in Broken Trail
hocbj23
Levergunner 2.0
Posts: 103
Joined: Sat May 02, 2009 12:06 pm

Pay it Forward

Post by hocbj23 »

Two shoulder holsters.One sidekick tactical for long barrel .38 or .357 revolver,one leather for short barrel .357 revolver.bj
86er
Advanced Levergunner
Posts: 4703
Joined: Sat Mar 31, 2007 2:58 pm
Location: Republic of Texas

Re: PAY IT FORWARD

Post by 86er »

Check the UNCLAIMED AUCTION ITEMS post on the forum. Anything on there can be had as a Pay It Forward for the cost of shipping an another item offered up to someone.
Professional Hunter
http://www.TARSPORTING.com
"Worldwide Hunting Adventures"

Professional Hunters Assoc of South Africa
SCI - Life Member
NRA - Life Member
NAHC - Trophy Life Member
DWWC - Member
User avatar
AmBraCol
Webservant
Posts: 3651
Joined: Fri Mar 30, 2007 8:12 am
Location: The Center of God's Grace
Contact:

Re: PAY IT FORWARD

Post by AmBraCol »

86er wrote:Check the UNCLAIMED AUCTION ITEMS post on the forum. Anything on there can be had as a Pay It Forward for the cost of shipping an another item offered up to someone.

Could you post a link? I'm not finding it...
Paul - in Pereira


"He is the best friend of American liberty who is most sincere and active in promoting true and undefiled religion." -- John Witherspoon

http://www.paulmoreland.com
http://www.pistolpackingpreachers.us
http://www.precisionandina.com
User avatar
AmBraCol
Webservant
Posts: 3651
Joined: Fri Mar 30, 2007 8:12 am
Location: The Center of God's Grace
Contact:

Re: PAY IT FORWARD

Post by AmBraCol »

86er wrote:Check the UNCLAIMED AUCTION ITEMS post on the forum. Anything on there can be had as a Pay It Forward for the cost of shipping an another item offered up to someone.

Could you post a link? I'm not finding it...



OK. I used SEARCH. Weird concept there - search it up, eh?

http://www.levergunscommunity.com/viewt ... 1&t=17851&
Paul - in Pereira


"He is the best friend of American liberty who is most sincere and active in promoting true and undefiled religion." -- John Witherspoon

http://www.paulmoreland.com
http://www.pistolpackingpreachers.us
http://www.precisionandina.com
User avatar
Ysabel Kid
Moderator
Posts: 27790
Joined: Mon Sep 17, 2007 7:10 pm
Location: South Carolina, USA
Contact:

Re: PAY IT FORWARD

Post by Ysabel Kid »

Looks like it's time to refresh this great idea. Nothing new posted in 6 months. I'll have to take a look at the "stuff" I have and see if I can find anything of interest. Holidays are coming... might make someone's day! :D
Image
alnitak
Senior Levergunner
Posts: 1775
Joined: Tue Sep 04, 2007 7:13 am
Location: Virginia

Re: PAY IT FORWARD

Post by alnitak »

Alright. Since YK didn't ressurect this thread, I will.

I have the following for PIF. Just a reminder, if you claim something, you have to put something up in return. Of course, you can always put something up for PIF first (hence the "forward" part).

Here are a few items for your consideration.
-- Used Lee Autoprime (no box, no shell holder, one tray for large primers)
-- 100 cleaned and deprimed 9mm brass cases
-- 50 cleaned .45 Colt cases (claimed by Deerwhacker)
-- 2 small Swiss Army knives
-- 1 generic multitool (marked "Handyman's Club of America" in plastic case)

Let the games begin!
Last edited by alnitak on Sat Jan 16, 2010 2:21 pm, edited 1 time in total.
"From birth 'til death...we travel between the eternities." -- Print Ritter in Broken Trail
User avatar
deerwhacker444
Senior Levergunner
Posts: 1300
Joined: Wed Sep 12, 2007 1:12 pm
Location: Oklahoma

Re: PAY IT FORWARD

Post by deerwhacker444 »

I got "dibs" on the (50) 45 colt cases.

Up for PIF, I've got a Stainless Steel Marlin safety replacement.

Image

I made this a while back and offered it to a forum member lately, but I guess he didn't want it. I'm 98% certain I made this out of Stainless Steel, but I can't be 100% sure. The material was some leftover shaft material in the shop. It is non magnetic steel and seems to be rust and corrosion resistant, and polishes up nice.

I tried this part in one of my own 1894's and it fits perfectly. So, this should fit any Stainless Steel Marlin 1894 or 336. If it turns out to not be Stainless, all I can say is, "sorry, I tried."
"If ever a time should come, when vain and aspiring men
shall possess the highest seats in Government,
our country will stand in need of its experienced patriots
to prevent its ruin
." Samuel Adams
mescalero1
Advanced Levergunner
Posts: 4923
Joined: Sat Dec 22, 2007 1:08 am
Location: Arizona headed for New Mexico

Re: PAY IT FORWARD

Post by mescalero1 »

hocbj23,
Are the shoulder holsters still available?
alnitak
Senior Levergunner
Posts: 1775
Joined: Tue Sep 04, 2007 7:13 am
Location: Virginia

Re: PAY IT FORWARD

Post by alnitak »

deerwhacker444 wrote:I got "dibs" on the (50) 45 colt cases.
They are yours Deerwhacker. I'll get them out early next week (Monday is a holiday).
"From birth 'til death...we travel between the eternities." -- Print Ritter in Broken Trail
KSRtrd

Re: PAY IT FORWARD

Post by KSRtrd »

Some Lee 44 Mag and 7.5 french dies, Ruger single six 22 factory grips, a pre 64 Winchester 94 30-30 shell lifter.
alnitak
Senior Levergunner
Posts: 1775
Joined: Tue Sep 04, 2007 7:13 am
Location: Virginia

Re: PAY IT FORWARD

Post by alnitak »

I'll take the pre-64 shell lifter as I'm working on a project gun now. Thanks!

The .45 cases have been mailed out, and I still have a couple other PIFs that are unclaimed (see above for the 9mm brass, Autoprime, etc.)
"From birth 'til death...we travel between the eternities." -- Print Ritter in Broken Trail
User avatar
deerwhacker444
Senior Levergunner
Posts: 1300
Joined: Wed Sep 12, 2007 1:12 pm
Location: Oklahoma

Re: PAY IT FORWARD

Post by deerwhacker444 »

.
The Safety Replacement is now gone...
dwight wrote:I'll take it then, Thanks. Sent some thing off via PIF a while back and never had been fast enough to catch anything I wanted. Need to look through what else I have and help get PIF a going again.

--Dwight
"If ever a time should come, when vain and aspiring men
shall possess the highest seats in Government,
our country will stand in need of its experienced patriots
to prevent its ruin
." Samuel Adams
KSRtrd

Re: PAY IT FORWARD

Post by KSRtrd »

Alnitak the lifter is yours. I sure could use that Lee autoprime....
alnitak
Senior Levergunner
Posts: 1775
Joined: Tue Sep 04, 2007 7:13 am
Location: Virginia

Re: PAY IT FORWARD

Post by alnitak »

Wolfshadow, the Autoprime is yours. Send me an address.

Funny, my SASS alias is Gray Ghost Wolf.
"From birth 'til death...we travel between the eternities." -- Print Ritter in Broken Trail
dwight
Levergunner
Posts: 28
Joined: Wed Oct 10, 2007 7:03 am
Location: NW Arkansas
Contact:

Re: PAY IT FORWARD

Post by dwight »

[quote="deerwhacker444"]I got "dibs" on the (50) 45 colt cases.

Up for PIF, I've got a [b]Stainless Steel[/b] Marlin safety replacement.

[img]http://img.photobucket.com/albums/v644/ ... fety-1.jpg[/img]

I made this a while back and offered it to a forum member lately, but I guess he didn't want it. [b][i][u]I'm 98% certain I made this out of Stainless Steel[/u][/i][/b], but I can't be 100% sure. The material was some leftover shaft material in the shop. It is non magnetic steel and seems to be rust and corrosion resistant, and polishes up nice.

I tried this part in one of my own 1894's and it fits perfectly. So, this should fit any Stainless Steel Marlin 1894 or 336. If it turns out to not be Stainless, all I can say is, "sorry, I tried."[/quote]


Got the safety today!.... Now to get unpacked and see what I can add to PIF

--Dwight
KSRtrd

Re: PAY IT FORWARD

Post by KSRtrd »

THe Single Six grips are spoken for.
dajudge43
Levergunner
Posts: 38
Joined: Tue Mar 25, 2008 8:33 pm
Location: Lincolnton, NC

Re: PAY IT FORWARD

Post by dajudge43 »

i have a rear sight for a M1 carbine...dont remember what it came off of..military or commercial made...but its for the 1st that says he will take it..all i need is name and addy
lefe member NRA
KSRtrd

Re: PAY IT FORWARD

Post by KSRtrd »

I will take it Friend. I have a M-1 carbine handguard like new, a couple of recoild plates unmaked one Plate screw and a oiler. These are very generic no special markings.
alnitak
Senior Levergunner
Posts: 1775
Joined: Tue Sep 04, 2007 7:13 am
Location: Virginia

Re: PAY IT FORWARD

Post by alnitak »

Still waiting for Dwight's PIF. Standard practice is before, or at, the time of claiming something.
"From birth 'til death...we travel between the eternities." -- Print Ritter in Broken Trail
86er
Advanced Levergunner
Posts: 4703
Joined: Sat Mar 31, 2007 2:58 pm
Location: Republic of Texas

Re: PAY IT FORWARD

Post by 86er »

Rubber Pachmayer grips for standard sized 1911 3/4 wrap around.

Same as above for Beretta or Taurus 92.

Who needs 'em?
Professional Hunter
http://www.TARSPORTING.com
"Worldwide Hunting Adventures"

Professional Hunters Assoc of South Africa
SCI - Life Member
NRA - Life Member
NAHC - Trophy Life Member
DWWC - Member
User avatar
Ysabel Kid
Moderator
Posts: 27790
Joined: Mon Sep 17, 2007 7:10 pm
Location: South Carolina, USA
Contact:

Re: PAY IT FORWARD

Post by Ysabel Kid »

Joe -

Would the ones for the Taurus fit the old model PT99, and if so, do they have finger-grooves for the front grip strap, or are they flat?

***

Free to a good home:

Season One/Volume One of the TV series "WANTED: Dead of Alive". This is a two disc set featuring the first 18 episodes of the series. I'll warn you though, after watching these, I went to Amazon.com and picked up the remainder. The rest of the first season also contained these episodes, so I no longer need this set - and figured I'll start someone else on a desire to have them all! :wink:

BTW, after watching these, you WILL want a Mare's Leg! :lol:
Image
KSRtrd

Re: PAY IT FORWARD

Post by KSRtrd »

Got one of those Cartridge adapters in 32 acp for 7.62 by 54 MM think its a Alex brand the round si placed in the front of the adapter. Have a military double .45 mag pouch kind of mustard green with making PB and company Dated 6-18 no holes no tears.
User avatar
Ysabel Kid
Moderator
Posts: 27790
Joined: Mon Sep 17, 2007 7:10 pm
Location: South Carolina, USA
Contact:

Re: PAY IT FORWARD

Post by Ysabel Kid »

I could use the cartridge adapter if it hasn't been spoken for. PM me. I'll find something in addition to the DVD above to "pay it forward"...
Image
User avatar
Old Ironsights
Posting leader...
Posts: 15084
Joined: Mon Apr 02, 2007 9:27 am
Location: Waiting for the Collapse
Contact:

Re: PAY IT FORWARD

Post by Old Ironsights »

Ysabel Kid wrote:I could use the cartridge adapter if it hasn't been spoken for. PM me. I'll find something in addition to the DVD above to "pay it forward"...
"Missed it by that much..." :wink:

OTOH, 7.62x54 is cheaper than .32acp, so I can't complain. :lol:
C2N14... because life is not energetic enough.
מנא, מנא, תקל, ופרסין Daniel 5:25-28... Got 7.62?
Not Depressed enough yet? Go read National Geographic, July 1976
Gott und Gewehr mit uns!
User avatar
Ysabel Kid
Moderator
Posts: 27790
Joined: Mon Sep 17, 2007 7:10 pm
Location: South Carolina, USA
Contact:

Re: PAY IT FORWARD

Post by Ysabel Kid »

Old Ironsights wrote:
Ysabel Kid wrote:I could use the cartridge adapter if it hasn't been spoken for. PM me. I'll find something in addition to the DVD above to "pay it forward"...
"Missed it by that much..." :wink:

OTOH, 7.62x54 is cheaper than .32acp, so I can't complain. :lol:
Flexibility. Just thinking about flexibility... :wink:
Image
User avatar
Old Ironsights
Posting leader...
Posts: 15084
Joined: Mon Apr 02, 2007 9:27 am
Location: Waiting for the Collapse
Contact:

Re: PAY IT FORWARD

Post by Old Ironsights »

Ysabel Kid wrote:
Old Ironsights wrote:
Ysabel Kid wrote:I could use the cartridge adapter if it hasn't been spoken for. PM me. I'll find something in addition to the DVD above to "pay it forward"...
"Missed it by that much..." :wink:

OTOH, 7.62x54 is cheaper than .32acp, so I can't complain. :lol:
Flexibility. Just thinking about flexibility... :wink:
True. but then, I have 3/4 case of .32acp and 2 cases of 54R...
C2N14... because life is not energetic enough.
מנא, מנא, תקל, ופרסין Daniel 5:25-28... Got 7.62?
Not Depressed enough yet? Go read National Geographic, July 1976
Gott und Gewehr mit uns!
KSRtrd

Re: PAY IT FORWARD

Post by KSRtrd »

The Kid's got it, Steve
KSRtrd

Re: PAY IT FORWARD

Post by KSRtrd »

A .427 scissor round ball mold single cavity is made of mild steel not iron, A Outdoor Life book its pretty old. The books first section is titled Jack 'O Connors Gun Book, pretty fun read usual Outdoor Life stuff by Jack O' Connor. The binding still in on piece however its been read.
Last edited by KSRtrd on Tue Apr 27, 2010 8:19 pm, edited 2 times in total.
Perfessr
Levergunner
Posts: 3
Joined: Sat Dec 22, 2007 2:23 pm

Re: PAY IT FORWARD

Post by Perfessr »

I'll take the Model 10 Cylinder.
I have a Scope base for a Marlin 39M
an old 1911 45acp mag and 100 45 ACP brass
Brian
<><
KSRtrd

Re: PAY IT FORWARD

Post by KSRtrd »

Its yours, PM your address, Cylinder is 1.63" long and 1.43 diameter, it looks like it was on a gun but not long. Found in a bin of parts at a show. Steve The 39M mount sounds good to me. If it sounds like the cylinder will not work tell me we'll back up on that.
k8vf
Levergunner
Posts: 16
Joined: Thu Jan 14, 2010 6:10 pm

Re: PAY IT FORWARD .223 brass(SPOKEN FOR, )

Post by k8vf »

Anyone have interest in some once fired brass for .223?

mixed bag, PMC, Federal< UMC.

Some steelies too, but will cull out if not wanted.


About a gallon or more.

Mark
K8VF
Michigan,. SPOKEN FOR
Last edited by k8vf on Tue Apr 27, 2010 2:25 pm, edited 3 times in total.
User avatar
vancelw
Advanced Levergunner
Posts: 3926
Joined: Mon Sep 28, 2009 1:56 pm
Location: 90% NE Texas and 10% SE Montana

Re: PAY IT FORWARD

Post by vancelw »

Ysabel Kid wrote:Joe -

Would the ones for the Taurus fit the old model PT99, and if so, do they have finger-grooves for the front grip strap, or are they flat?

***

Free to a good home:

Season One/Volume One of the TV series "WANTED: Dead of Alive". This is a two disc set featuring the first 18 episodes of the series. I'll warn you though, after watching these, I went to Amazon.com and picked up the remainder. The rest of the first season also contained these episodes, so I no longer need this set - and figured I'll start someone else on a desire to have them all! :wink:

BTW, after watching these, you WILL want a Mare's Leg! :lol:
YK-If you are still offering the DVD, I will take it (I'll send you a picture of the Mare's leg later :lol: :lol: :oops: )
If it's still available, I'll PM my addy.

I offer as a PIF an older (vintage, antique, or just old ??) two-die Lyman .220 Swift set in original box. I think I have some .220 brass that can go with it, too (not much.)
"Make yourself an honest man, and then you may be sure that there is one less scoundrel in the world." - Thomas Carlyle
User avatar
Ysabel Kid
Moderator
Posts: 27790
Joined: Mon Sep 17, 2007 7:10 pm
Location: South Carolina, USA
Contact:

Re: PAY IT FORWARD

Post by Ysabel Kid »

vancelw wrote:
Ysabel Kid wrote:Joe -

Would the ones for the Taurus fit the old model PT99, and if so, do they have finger-grooves for the front grip strap, or are they flat?

***

Free to a good home:

Season One/Volume One of the TV series "WANTED: Dead of Alive". This is a two disc set featuring the first 18 episodes of the series. I'll warn you though, after watching these, I went to Amazon.com and picked up the remainder. The rest of the first season also contained these episodes, so I no longer need this set - and figured I'll start someone else on a desire to have them all! :wink:

BTW, after watching these, you WILL want a Mare's Leg! :lol:
YK-If you are still offering the DVD, I will take it (I'll send you a picture of the Mare's leg later :lol: :lol: :oops: )
If it's still available, I'll PM my addy.

I offer as a PIF an older (vintage, antique, or just old ??) two-die Lyman .220 Swift set in original box. I think I have some .220 brass that can go with it, too (not much.)
Sorry - wolfslightshadow is enjoying the first season now! :wink:
Image
41 Redhawk
Levergunner 2.0
Posts: 366
Joined: Fri Sep 14, 2007 12:05 pm
Location: Danville, Va

Re: PAY IT FORWARD .223 brass

Post by 41 Redhawk »

k8vf wrote:Anyone have interest in some once fired brass for .223?

mixed bag, PMC, Federal< UMC.

Some steelies too, but will cull out if not wanted.


About a gallon or more.

Mark
K8VF
Michigan,.
Mark, I'll take the 223 brass and will PM you my address. Thanks

I offer a Pachmayer Grip and Fore end for an older non-easy open Contender frame as PIF.
The Lord Bless You

Terry
salvo
Senior Levergunner
Posts: 1509
Joined: Mon Sep 03, 2007 3:56 pm
Location: Vegas
Contact:

Re: PAY IT FORWARD

Post by salvo »

41 Redhawk, I'll take the Pachmayer Grip and Fore end.
I'll PM you, Thanks!

I'll post something up once I get home.
ScottS

Image

"No arsenal, no weapon in the arsenals of the world, is so formidable as the will and moral courage of free men and women."
-- Ronald Reagan
User avatar
vancelw
Advanced Levergunner
Posts: 3926
Joined: Mon Sep 28, 2009 1:56 pm
Location: 90% NE Texas and 10% SE Montana

Re: PAY IT FORWARD

Post by vancelw »

Ysabel Kid wrote: Sorry - wolfslightshadow is enjoying the first season now! :wink:
No problem. Story of my life. :cry: I read through the thread and didn't notice if anyone got it. Can I still buy a mare's leg? :lol: I think I missed a good buy on one last October at the Waco gun show.

The .220 swift dies are available anyway if someone wants them.
"Make yourself an honest man, and then you may be sure that there is one less scoundrel in the world." - Thomas Carlyle
User avatar
Ysabel Kid
Moderator
Posts: 27790
Joined: Mon Sep 17, 2007 7:10 pm
Location: South Carolina, USA
Contact:

Re: PAY IT FORWARD

Post by Ysabel Kid »

vancelw wrote: Can I still buy a mare's leg? :lol: I think I missed a good buy on one last October at the Waco gun show.
I know I'd love to get one. Just the same problem as always - no funds! :lol:
Image
salvo
Senior Levergunner
Posts: 1509
Joined: Mon Sep 03, 2007 3:56 pm
Location: Vegas
Contact:

Re: PAY IT FORWARD

Post by salvo »

Up for grabs, .30 Carbine, Once Fired Brass 100ct.
ScottS

Image

"No arsenal, no weapon in the arsenals of the world, is so formidable as the will and moral courage of free men and women."
-- Ronald Reagan
User avatar
2ndovc
Advanced Levergunner
Posts: 9302
Joined: Fri Sep 07, 2007 11:59 am
Location: OH, South Shore of Lake Erie

Re: PAY IT FORWARD

Post by 2ndovc »

salvo wrote:Up for grabs, .30 Carbine, Once Fired Brass 100ct.

Scott,

I can use the .30 brass.


jasonb
jasonB " Another Dirty Yankee"


" Tomorrow the sun will rise. Who knows what the tide could bring?"
salvo
Senior Levergunner
Posts: 1509
Joined: Mon Sep 03, 2007 3:56 pm
Location: Vegas
Contact:

Re: PAY IT FORWARD

Post by salvo »

You got it Jason. PM me your address and I'll get it right out.
ScottS

Image

"No arsenal, no weapon in the arsenals of the world, is so formidable as the will and moral courage of free men and women."
-- Ronald Reagan
Post Reply