Attention 50 Ak, 50/110 and other 50 cal users

[JFE]

Gents,

for those of you interested there is a Group Buy on Cast Boolits for a very useful mould for 50 cal levergun and 500 Linebaugh users. The base mould is a 500 gr 0.513 FN bullet with the crimp groove in the correct location for use in 50 cal leverguns.

The mould maker is providing a lot of options, including up to 4 cavities and a conventional HP option for one of the cavities. He also is providing an option for a new style of mould that has either 2 or 4 captive HP pins - these moulds are designated RG-2 or RG-4. With these new moulds you can produce a heap of HP bullets quite quickly. In addition the HP pins are interchangeble with FN pins to enable making FN bullets as well using the same mould. The design incorporates a long shank to take the long Gator 50 cal GC.

This would probably make it one of the most flexible moulds available for 50 cal leverguns.

Here's a link to the thread.

http://www.castboolits.gunloads.com/sho ... p?p=672323

Joe