Does anybody have the contact info for the guy that used to sell these on the old Leverguns site?
I have a friend who needs a couple, and does not want to cut his safety off.
Marlin Safety Replacement. Need info for a friend.....
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
-
Jeff Quinn
- Shootist
- Posts: 340
- Joined: Mon Dec 17, 2007 2:51 pm
- Location: Lat/Lon: 36.41 -87.71 Elevation: 397 ft
Marlin Safety Replacement. Need info for a friend.....
Jeff Quinn
gunblast.com
gunblast.com
-
deerwhacker444
- Senior Levergunner
- Posts: 1300
- Joined: Wed Sep 12, 2007 1:12 pm
- Location: Oklahoma
Re: Marlin Safety Replacement. Need info for a friend.....
Kits are available from:
Clyde Ludwig
PO Box 26156
Wauwatosa, WI
53226-0156
phone 414-536-1101 after 6:30 PM CST
$9.95 plus $3.00 S&H
(if you order more than one kit, the shipping is still only $3.00)
This is old info, don't know if the prices are still the same.
By the way, how's your brother doing? Healing up.?
Clyde Ludwig
PO Box 26156
Wauwatosa, WI
53226-0156
phone 414-536-1101 after 6:30 PM CST
$9.95 plus $3.00 S&H
(if you order more than one kit, the shipping is still only $3.00)
This is old info, don't know if the prices are still the same.
By the way, how's your brother doing? Healing up.?
"If ever a time should come, when vain and aspiring men
shall possess the highest seats in Government,
our country will stand in need of its experienced patriots
to prevent its ruin." Samuel Adams
shall possess the highest seats in Government,
our country will stand in need of its experienced patriots
to prevent its ruin." Samuel Adams
Re: Marlin Safety Replacement. Need info for a friend.....
http://www.leverguns.com/articles/taylo ... safety.htm is the address for JimT's article and I used the contact info therein to order two of the safety replacements which I received in about 1 week. Works just fine.
Sincerely,
Hobie
"We are all travelers in the wilderness of this world, and the best that we find in our travels is an honest friend." Robert Louis Stevenson
Hobie
"We are all travelers in the wilderness of this world, and the best that we find in our travels is an honest friend." Robert Louis Stevenson
Re: Marlin Safety Replacement. Need info for a friend.....
I have purchased over a dozen. All worked perfectly. 1886.