Is this cylinder for a NM or OM. Box does not say. I would expect the box to say NM if it is for a NM, unless it is the wrong box.
I just won on GB hoping it is OM as my single Six is an OM. if indeed for a NM, am I screwed? Is there any posibillity of it fitting my OM?
http://www.gunbroker.com/auction/ViewIt ... =106085693
Ruger single six Question (pic)
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Ruger single six Question (pic)
Keep The Faith
Re: Ruger single six Question (pic)
Looks to be for a new model, every old model I've seen is fluted, both lr and magnum.
-
- Senior Levergunner
- Posts: 1459
- Joined: Wed Feb 06, 2008 6:31 pm
- Location: Arizona Territory
Re: Ruger single six Question (pic)
OM, are you refering to a 3 screw SS. If so I think you are correct. However I believe My 3-S 22 mag cyl. had a fluted cylinder. The New Model's 22LR cylinder is fluted, the 22 Mag. non-fluted. I had both recently, and kept the NM RSS in Stainless. When I had the OM I had just the opposite problem, it came W/O the 22LR cylinder.
If is wrong you should have no trouble selling it.
If is wrong you should have no trouble selling it.
SASS# 51223
Arizona Cowboy Shooter's Assoc.
Cowtown Cowboy Shooter's Assoc.
Uberti 73/44-40 carbine, Rossi 92/44-40,
Marlin 94CB/44 24" Limited, Winchester 94/30-30
Arizona Cowboy Shooter's Assoc.
Cowtown Cowboy Shooter's Assoc.
Uberti 73/44-40 carbine, Rossi 92/44-40,
Marlin 94CB/44 24" Limited, Winchester 94/30-30
- J Miller
- Member Emeritus
- Posts: 14884
- Joined: Sat Mar 31, 2007 7:46 pm
- Location: Not in IL no more ... :)
Re: Ruger single six Question (pic)
Rogmatt,Rogmatt wrote:Is this cylinder for a NM or OM. Box does not say. I would expect the box to say NM if it is for a NM, unless it is the wrong box.
I just won on GB hoping it is OM as my single Six is an OM. if indeed for a NM, am I screwed? Is there any posibillity of it fitting my OM?
http://www.gunbroker.com/auction/ViewIt ... =106085693
The Old Models and the early New Model Super Single-Sixes used fluted cylinders. Somewhere in the production they changed to a non fluted magnum cylinder.
The cylinder in your gunbroker auction is a New Model cylinder.
However all is not lost. Ruger has never changed the frame or cylinder sizes on the Single Six series.
So there is a fairly decent chance that cylinder will fit and function in your gun. If it don't there's also a good chance it can be fitted to your gun.
Joe
***Be sneaky, get closer, bust the cap on him when you can put the ball where it counts .***
Re: Ruger single six Question (pic)
Thank you much. I am getting it & will let you know how it works.
Here's the gun.
Here's the gun.
Keep The Faith
- 2ndovc
- Advanced Levergunner
- Posts: 9340
- Joined: Fri Sep 07, 2007 11:59 am
- Location: OH, South Shore of Lake Erie
Re: Ruger single six Question (pic)
Neat Sixgun!!
jb
jb
jasonB " Another Dirty Yankee"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
Re: Ruger single six Question (pic)
Rogmatt , be careful you could poke someones eye out with that !