Glad to have the forum back!
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
-
Bill in Oregon
- Advanced Levergunner
- Posts: 10625
- Joined: Sun Jun 29, 2008 10:05 am
- Location: The Land of Enchantment
Glad to have the forum back!
It's been pretty sketchy the past few days, and then dark. 
- marlinman93
- Advanced Levergunner
- Posts: 7283
- Joined: Sun Apr 01, 2007 3:40 pm
- Location: Oregon
Re: Glad to have the forum back!
Well I thought it was just my computer or internet! There have been days here and there where it hasn't worked at all. But at the same time two other gun forums I visit had similar issues. They came back before this forum did though.Bill in Oregon wrote: ↑Fri Feb 27, 2026 9:57 am It's been pretty sketchy the past few days, and then dark.![]()
Pre WWI Marlins and Singleshot rifles!
http://members.tripod.com/~OregonArmsCollectors/
http://members.tripod.com/~OregonArmsCollectors/
- GunnyMack
- Advanced Levergunner
- Posts: 11796
- Joined: Mon Sep 19, 2016 7:57 am
- Location: Not where I want to be!
Re: Glad to have the forum back!
Was the same here.
If you email Andy at Skinner Sites when you notice leverguns is down he can hopefully get us back on track faster.
That being said, this morning I couldn't get on here again so I emailed Andy and POOF we are back! ( no applause please)
If you email Andy at Skinner Sites when you notice leverguns is down he can hopefully get us back on track faster.
That being said, this morning I couldn't get on here again so I emailed Andy and POOF we are back! ( no applause please)
BROWN LABS MATTER !!
- gamekeeper
- Spambot Zapper
- Posts: 18447
- Joined: Thu Sep 06, 2007 3:32 pm
- Location: Englandistan twinned with the third world.
Re: Glad to have the forum back!
Thank you Will for contacting Andy it seems to get something done...
Whatever you do always give 100%........... unless you are donating blood.
- Griff
- Posting leader...
- Posts: 21492
- Joined: Sat Mar 31, 2007 4:56 pm
- Location: OH MY GAWD they installed a STOP light!!!
Re: Glad to have the forum back!
I did that the last time it went down and almost immediately it was back up... I suspect I was late to the party and he'd already started on the fix...
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
- LeverGunner
- Levergunner 3.0
- Posts: 792
- Joined: Mon Mar 18, 2024 11:27 am
- Location: Cecilia, Kentucky
- Contact:
Re: Glad to have the forum back!
Glad we're back. I missed it.
The Lord is my shepherd; I shall not want.
BulletMatch: Cataloging the World's Bullets.
Lead Alloy Calculator
BulletMatch: Cataloging the World's Bullets.
Lead Alloy Calculator
- GunnyMack
- Advanced Levergunner
- Posts: 11796
- Joined: Mon Sep 19, 2016 7:57 am
- Location: Not where I want to be!
Re: Glad to have the forum back!
Not sure about you guys but this morning it's very S L O W to load...
BROWN LABS MATTER !!
- gamekeeper
- Spambot Zapper
- Posts: 18447
- Joined: Thu Sep 06, 2007 3:32 pm
- Location: Englandistan twinned with the third world.
Re: Glad to have the forum back!
Same here very slow.
Whatever you do always give 100%........... unless you are donating blood.
- JimT
- Shootist
- Posts: 7030
- Joined: Thu Sep 06, 2007 5:04 pm
- Location: On the San Gabriel River, Texas
Re: Glad to have the forum back!
Working OK for me now ....
-
Bill in Oregon
- Advanced Levergunner
- Posts: 10625
- Joined: Sun Jun 29, 2008 10:05 am
- Location: The Land of Enchantment
Re: Glad to have the forum back!
It would not load for me this morning, either. Glad it will now.
- LeverGunner
- Levergunner 3.0
- Posts: 792
- Joined: Mon Mar 18, 2024 11:27 am
- Location: Cecilia, Kentucky
- Contact:
Re: Glad to have the forum back!
Was out yesterday sometime until just now for me.
The Lord is my shepherd; I shall not want.
BulletMatch: Cataloging the World's Bullets.
Lead Alloy Calculator
BulletMatch: Cataloging the World's Bullets.
Lead Alloy Calculator
-
Ray Newman
- Advanced Levergunner
- Posts: 2128
- Joined: Mon Dec 10, 2007 12:43 pm
- Location: Between No Where & No Place, WA
Re: Glad to have the forum back!
Fri 2/27, Sat 2/28, and today 3/1 system timed out and would not load. Tried a few times on Sat and today. Page loaded, but slowly.
On 2/28 and today needed to log on twice. Checked the "remember me" each time I entered name and password. Supposedly, password was not correct. Finally was able to access page, but was very slow to load.
On 2/28 and today needed to log on twice. Checked the "remember me" each time I entered name and password. Supposedly, password was not correct. Finally was able to access page, but was very slow to load.
The most important aspect of this signature line is that you don't realize it doesn't say anything significant until you are just about done reading it & then it is too late to stop reading it....
Grand Poo Bah WA F.E.S.
In real life may you be the bad butt that you claim to be on social media.
Grand Poo Bah WA F.E.S.
In real life may you be the bad butt that you claim to be on social media.
- Ysabel Kid
- Moderator
- Posts: 29091
- Joined: Mon Sep 17, 2007 7:10 pm
- Location: South Carolina, USA
- Contact:
Re: Glad to have the forum back!
.
Well guys, you gotta figure that since the Iranians obviously want to shut down the whole U.S. in the process of killing all the infidels, they know where to start, and this humble website is probably the nucleus of the most fearsome resistance they would come up against if they trying to invade the U.S.. . . .

Well guys, you gotta figure that since the Iranians obviously want to shut down the whole U.S. in the process of killing all the infidels, they know where to start, and this humble website is probably the nucleus of the most fearsome resistance they would come up against if they trying to invade the U.S.. . . .
It's 2025 - "Cutesy Time is OVER....!" [Dan Bongino]
- marlinman93
- Advanced Levergunner
- Posts: 7283
- Joined: Sun Apr 01, 2007 3:40 pm
- Location: Oregon
Re: Glad to have the forum back!
Haven't been able to bring this site up the last two days. Today it came up, but is very slow still!
Pre WWI Marlins and Singleshot rifles!
http://members.tripod.com/~OregonArmsCollectors/
http://members.tripod.com/~OregonArmsCollectors/
- marlinman93
- Advanced Levergunner
- Posts: 7283
- Joined: Sun Apr 01, 2007 3:40 pm
- Location: Oregon
Re: Glad to have the forum back!
PS-My browser tells me it's blocking 23 trackers from this site too! Maybe that's part of what's making things so slow?
Pre WWI Marlins and Singleshot rifles!
http://members.tripod.com/~OregonArmsCollectors/
http://members.tripod.com/~OregonArmsCollectors/
Re: Glad to have the forum back!
Couldn't get on for about 2 days. Seems good now.
D. Brian Casady
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
-
Bill in Oregon
- Advanced Levergunner
- Posts: 10625
- Joined: Sun Jun 29, 2008 10:05 am
- Location: The Land of Enchantment
Re: Glad to have the forum back!
These disruptions are getting to be a real disappointment.
- marlinman93
- Advanced Levergunner
- Posts: 7283
- Joined: Sun Apr 01, 2007 3:40 pm
- Location: Oregon
Re: Glad to have the forum back!
couldn't get on here again yesterday. Tried a few times during the day, but no luck. Sent Andy an email and he said he was out of the country and couldn't do much with a slow connection. Then today it came up quickly, but something must have reset as I had to login again as the site had logged me out? At least it's working......for now.
Pre WWI Marlins and Singleshot rifles!
http://members.tripod.com/~OregonArmsCollectors/
http://members.tripod.com/~OregonArmsCollectors/
- marlinman93
- Advanced Levergunner
- Posts: 7283
- Joined: Sun Apr 01, 2007 3:40 pm
- Location: Oregon
Re: Glad to have the forum back!
Hasn't worked the last two days for me. Then just now BAM, it opens up and works great again!
Pre WWI Marlins and Singleshot rifles!
http://members.tripod.com/~OregonArmsCollectors/
http://members.tripod.com/~OregonArmsCollectors/
-
Lastmohecken
- Advanced Levergunner
- Posts: 2145
- Joined: Sat Sep 15, 2007 1:42 pm
- Location: Arkansas
Re: Glad to have the forum back!
I had trouble with it all day, trying to use it. Very slow to load or not load at all. But I just tried it a few minutes ago and it now it works fine at the moment. I was going to as if anyone else was having problems, but I guess my question has been answered. But the site has been spotty for quiet a while now. Sometimes I can get on and sometimes for a few hours, I cannot.
NRA Life Member, Patron
-
Bill in Oregon
- Advanced Levergunner
- Posts: 10625
- Joined: Sun Jun 29, 2008 10:05 am
- Location: The Land of Enchantment
Re: Glad to have the forum back!
Yes, off and on for me too the last several days, and briefly lightning fast yesterday morning. Maybe we're connected to the power grid in Havana. 
- Griff
- Posting leader...
- Posts: 21492
- Joined: Sat Mar 31, 2007 4:56 pm
- Location: OH MY GAWD they installed a STOP light!!!
Re: Glad to have the forum back!
Slow for me the past several days, often opening up and then kicking me off when I attempt to post something. Seems much faster this morning. Fingers crossed.
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
- gamekeeper
- Spambot Zapper
- Posts: 18447
- Joined: Thu Sep 06, 2007 3:32 pm
- Location: Englandistan twinned with the third world.
Re: Glad to have the forum back!
You do not have the required permissions to view the files attached to this post.
Whatever you do always give 100%........... unless you are donating blood.
- GunnyMack
- Advanced Levergunner
- Posts: 11796
- Joined: Mon Sep 19, 2016 7:57 am
- Location: Not where I want to be!
Re: Glad to have the forum back!
Its been very slow if I can get any pages to open at all.
I just tried to email Andy but it won't send. Why I have no clue!
I just tried to email Andy but it won't send. Why I have no clue!
BROWN LABS MATTER !!
-
Ray Newman
- Advanced Levergunner
- Posts: 2128
- Joined: Mon Dec 10, 2007 12:43 pm
- Location: Between No Where & No Place, WA
Re: Glad to have the forum back!
For the last 7-10 days site has been slow to load before it times out or I receive a 503 error.
The most important aspect of this signature line is that you don't realize it doesn't say anything significant until you are just about done reading it & then it is too late to stop reading it....
Grand Poo Bah WA F.E.S.
In real life may you be the bad butt that you claim to be on social media.
Grand Poo Bah WA F.E.S.
In real life may you be the bad butt that you claim to be on social media.
- ANDYLARSSON
- Site Owner
- Posts: 67
- Joined: Mon Jul 25, 2022 4:07 pm
Re: Glad to have the forum back!
Hey Guys, working on figuring out what kind of bug keeps stalling the forum.
My apologies for the issue. I’m working with the host. We have upgraded the amount of storage exponentially, pay for a better plan, etc….
Soon as I know something I’ll post it here.
Meanwhile, thank you for your patience
Andy
My apologies for the issue. I’m working with the host. We have upgraded the amount of storage exponentially, pay for a better plan, etc….
Soon as I know something I’ll post it here.
Meanwhile, thank you for your patience
Andy
- marlinman93
- Advanced Levergunner
- Posts: 7283
- Joined: Sun Apr 01, 2007 3:40 pm
- Location: Oregon
Re: Glad to have the forum back!
Yesterday it opened right up, but making a reply to anything was slow to respond. I finally gave up, and today so far seems great.
Pre WWI Marlins and Singleshot rifles!
http://members.tripod.com/~OregonArmsCollectors/
http://members.tripod.com/~OregonArmsCollectors/
- COSteve
- Advanced Levergunner
- Posts: 4128
- Joined: Sun Jul 12, 2009 4:03 pm
- Location: A little valley up in the Rockies
Re: Glad to have the forum back!
For me it's still slow to load and slow to respond. This forum is spotty at best and I'm loosing patience with the many interruptions and spotty service.
Steve
18 Years into My New Career; 'Gentleman at Leisure'
Travel is Our Passion: 83 Countries and All 50 States Visited
No Matter Where You Go, There You Are
18 Years into My New Career; 'Gentleman at Leisure'
Travel is Our Passion: 83 Countries and All 50 States Visited
No Matter Where You Go, There You Are
Re: Glad to have the forum back!
3-4 times in the last month, I've submitted a post and got booted off before it loaded.
People were smarter before the Internet, or imbeciles were harder to notice.
-
Bill in Oregon
- Advanced Levergunner
- Posts: 10625
- Joined: Sun Jun 29, 2008 10:05 am
- Location: The Land of Enchantment
Re: Glad to have the forum back!
Andy, thank you for working on this. If you need the gang to chip in please ask!
- gamekeeper
- Spambot Zapper
- Posts: 18447
- Joined: Thu Sep 06, 2007 3:32 pm
- Location: Englandistan twinned with the third world.
Re: Glad to have the forum back!
Still very slow.
Whatever you do always give 100%........... unless you are donating blood.
- Streetstar
- Advanced Levergunner
- Posts: 4235
- Joined: Sun Jan 11, 2009 5:58 am
- Location: Oklahoma
- Griff
- Posting leader...
- Posts: 21492
- Joined: Sat Mar 31, 2007 4:56 pm
- Location: OH MY GAWD they installed a STOP light!!!
Re: Glad to have the forum back!
What I have taken to doing is to do a copy ctrl "C" of my response before hitting the submit button, that way if I get the dreaded "500 Error" or "this site in unavailable", I back arrow my browser & "refresh" until the dialog box returns and do a Ctrl "V" to paste my previous attempt and hit the submit button again. Works... most of the time.
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
- marlinman93
- Advanced Levergunner
- Posts: 7283
- Joined: Sun Apr 01, 2007 3:40 pm
- Location: Oregon
Re: Glad to have the forum back!
I couldn't get on Tue. and Wed. and today it was slow, and I had to login again as the "remember me" thing stopped working.
Pre WWI Marlins and Singleshot rifles!
http://members.tripod.com/~OregonArmsCollectors/
http://members.tripod.com/~OregonArmsCollectors/
-
Lastmohecken
- Advanced Levergunner
- Posts: 2145
- Joined: Sat Sep 15, 2007 1:42 pm
- Location: Arkansas
Trouble with this website!?????????
I know there's another thread on here, about this, but I just got to ask, does anyone know what is going on with the site? The last several days, maybe longer, it's been really hit and miss as to when I can even get on here. And then sometimes it runs really slow if at all, once I do finally get it to open up. Then I will eventually catch it, where it works pretty good for a few minutes or maybe a few hours and then it goes right back to pretty much impossible for me to use.
How many people are having trouble with this? Is there an individual solution on my end or something? I mean, my computer is fine, I believe. I don't have any issues with other sites I go to.
Is the site doing ongoing upgrades or repairs, etc.? I am just trying to figure it out.
How many people are having trouble with this? Is there an individual solution on my end or something? I mean, my computer is fine, I believe. I don't have any issues with other sites I go to.
Is the site doing ongoing upgrades or repairs, etc.? I am just trying to figure it out.
NRA Life Member, Patron
- AmBraCol
- Webservant
- Posts: 3908
- Joined: Fri Mar 30, 2007 8:12 am
- Location: The Center of God's Grace
- Contact:
Re: Trouble with this website!?????????
I just merged with the other thread to keep info together. It's not just you, not just US based or UK based participants either. Haven't heard details on what exactly is going on, but "it's not you".Lastmohecken wrote: ↑Fri Mar 20, 2026 3:11 pm I know there's another thread on here, about this, but I just got to ask, does anyone know what is going on with the site? The last several days, maybe longer, it's been really hit and miss as to when I can even get on here. And then sometimes it runs really slow if at all, once I do finally get it to open up. Then I will eventually catch it, where it works pretty good for a few minutes or maybe a few hours and then it goes right back to pretty much impossible for me to use.
How many people are having trouble with this? Is there an individual solution on my end or something? I mean, my computer is fine, I believe. I don't have any issues with other sites I go to.
Is the site doing ongoing upgrades or repairs, etc.? I am just trying to figure it out.
Paul - in Pereira
"He is the best friend of American liberty who is most sincere and active in promoting true and undefiled religion." -- John Witherspoon
http://www.paulmoreland.com
http://www.pistolpackingpreachers.us
http://www.precisionandina.com
"He is the best friend of American liberty who is most sincere and active in promoting true and undefiled religion." -- John Witherspoon
http://www.paulmoreland.com
http://www.pistolpackingpreachers.us
http://www.precisionandina.com
- marlinman93
- Advanced Levergunner
- Posts: 7283
- Joined: Sun Apr 01, 2007 3:40 pm
- Location: Oregon
Re: Glad to have the forum back!
To answer the question here's what Andy Larrson posted five days ago.ANDYLARSSON wrote: ↑Sun Mar 15, 2026 11:38 pm Hey Guys, working on figuring out what kind of bug keeps stalling the forum.
My apologies for the issue. I’m working with the host. We have upgraded the amount of storage exponentially, pay for a better plan, etc….
Soon as I know something I’ll post it here.
Meanwhile, thank you for your patience
Andy
Pre WWI Marlins and Singleshot rifles!
http://members.tripod.com/~OregonArmsCollectors/
http://members.tripod.com/~OregonArmsCollectors/
- ANDYLARSSON
- Site Owner
- Posts: 67
- Joined: Mon Jul 25, 2022 4:07 pm
Re: Glad to have the forum back!
Good Morning Everyone,
I'm working on the page again now. Loading very quickly this AM.
Online Support is saying:
"Hmm strange, it runs quickly for me. Your vps's have been up for over 150 days. I'm going to do a quick reset, this will clear up any dead / stuck processes on the backend."
I'll also take a look at the BOT traffic.
Please hit the site and poke around to see if there is any one page or link that is slower than the others.
My apologies for the issues. We have added much more storage to the server, right now only using about 1/4 - 1/3 of available memory.
Thank you all for your patience.
Andy
I'm working on the page again now. Loading very quickly this AM.
Online Support is saying:
"Hmm strange, it runs quickly for me. Your vps's have been up for over 150 days. I'm going to do a quick reset, this will clear up any dead / stuck processes on the backend."
I'll also take a look at the BOT traffic.
Please hit the site and poke around to see if there is any one page or link that is slower than the others.
My apologies for the issues. We have added much more storage to the server, right now only using about 1/4 - 1/3 of available memory.
Thank you all for your patience.
Andy
- marlinman93
- Advanced Levergunner
- Posts: 7283
- Joined: Sun Apr 01, 2007 3:40 pm
- Location: Oregon
Re: Glad to have the forum back!
It opened fine this morning, and looking around is fast. But when posting a reply to any thread it still seems to stall a little. Just long enough to make me wonder if it's going to post, and then it works.
Pre WWI Marlins and Singleshot rifles!
http://members.tripod.com/~OregonArmsCollectors/
http://members.tripod.com/~OregonArmsCollectors/
- Griff
- Posting leader...
- Posts: 21492
- Joined: Sat Mar 31, 2007 4:56 pm
- Location: OH MY GAWD they installed a STOP light!!!
Re: Glad to have the forum back!
When I got on and tried opening a topic, it stalled and gave me the "500 error", but when I hit refresh, it opened right up. When I responded to a topic just now, it went fairly quickly. Thanks for all you do.
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
- ANDYLARSSON
- Site Owner
- Posts: 67
- Joined: Mon Jul 25, 2022 4:07 pm
Re: Glad to have the forum back!
Thank you!marlinman93 wrote: ↑Sat Mar 21, 2026 11:38 am It opened fine this morning, and looking around is fast. But when posting a reply to any thread it still seems to stall a little. Just long enough to make me wonder if it's going to post, and then it works.
- ANDYLARSSON
- Site Owner
- Posts: 67
- Joined: Mon Jul 25, 2022 4:07 pm
Re: Glad to have the forum back!
Thank you! I'm seeing a bit of pause in replying also.
Glad its loading. Will continue to see what we can do to improve things.
Re: Glad to have the forum back!
Another forum I frequent has had ongoing problems of a similar type, what ended up working was cloudflare verification. At one point someone mentioned that they checked traffic, and when it was not opening, there was 81,000 to over 200k bots or user hits trying to use the forum. After the cloudflare was set up again, it went to several hundred to a couple thousand, which was manageable for the system (I dont recall exact numbers but think those are close).
Theyve had the cloudflare off and on, then think they got it sorted out, then get attacked again. People get grumpy about it, but it does significantly cut the bot traffic and allow the forum to stay functional. Ive seen quite a few forums ior sites that are now using cloudflare to thin down the bots and stay operational.
Forum in question is pistol-forum.com. Dont know if that info adds anything useful, but it seems like similar problems with access. They may be able to answer questions.
The reality of the current internet is there are large numbers of AI developers using freely available info and sites on the net to train their systems, and it overloads many sites with all the bots hitting trying to get information, and some may be malicious bots.
Theyve had the cloudflare off and on, then think they got it sorted out, then get attacked again. People get grumpy about it, but it does significantly cut the bot traffic and allow the forum to stay functional. Ive seen quite a few forums ior sites that are now using cloudflare to thin down the bots and stay operational.
Forum in question is pistol-forum.com. Dont know if that info adds anything useful, but it seems like similar problems with access. They may be able to answer questions.
The reality of the current internet is there are large numbers of AI developers using freely available info and sites on the net to train their systems, and it overloads many sites with all the bots hitting trying to get information, and some may be malicious bots.
"Far better it is to dare mighty things, to win glorious triumphs even though checkered by failure, than to rank with those poor spirits who neither enjoy nor suffer much because they live in the gray twilight that knows neither victory nor defeat." -Theodore Roosevelt-
Isnt it amazing how many people post without reading the thread?
Isnt it amazing how many people post without reading the thread?
