Getting the Sights Close on the Shootists Anniversary Gun

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
User avatar
JimT
Shootist
Posts: 6367
Joined: Thu Sep 06, 2007 5:04 pm

Getting the Sights Close on the Shootists Anniversary Gun

Post by JimT »

Had a few moments at the Range this morning. Got it sighted pretty close with some 800 to 900 fps loads. I fired a couple of my heavy 300 gr. loads but they hurt when you are shooting sitting down! And I don't enjoy the recoil anymore. Sticking with the standard velocity loads.
IMG_7669.JPG
IMG_7670.JPG
You do not have the required permissions to view the files attached to this post.
User avatar
Scott Tschirhart
Advanced Levergunner
Posts: 5133
Joined: Fri Oct 16, 2020 2:56 pm
Location: San Antonio, Texas

Re: Getting the Sights Close on the Shootists Anniversary Gun

Post by Scott Tschirhart »

That certainly looks like you are on.
User avatar
JimT
Shootist
Posts: 6367
Joined: Thu Sep 06, 2007 5:04 pm

Re: Getting the Sights Close on the Shootists Anniversary Gun

Post by JimT »

I used 3 different bullets at close to the same velocity ..

the Keith SWC - 260 gr. - with Unique
the SSK270 - 270 gr. - with Green Dot
the #452664 - 250 gr. - with 700X

They all hit pretty much the same place ...

Here is the SSK target
sighting3.JPG
You do not have the required permissions to view the files attached to this post.
User avatar
Scott Tschirhart
Advanced Levergunner
Posts: 5133
Joined: Fri Oct 16, 2020 2:56 pm
Location: San Antonio, Texas

Re: Getting the Sights Close on the Shootists Anniversary Gun

Post by Scott Tschirhart »

I’m looking to stick with revolver loads at around 800-900 fps and around 1000 or so in the Marlin.

I figure that’s plenty.
User avatar
JimT
Shootist
Posts: 6367
Joined: Thu Sep 06, 2007 5:04 pm

Re: Getting the Sights Close on the Shootists Anniversary Gun

Post by JimT »

Me too. My old shoulders just don't like the quick sharp recoil anymore. And this is a fun gun. The whole family can enjoy it. The 250 gr. FP at 800 fps is pleasant to shoot and it's accurate. I have a bunch of them loaded up from the old CAS days. I never shot powder puff loads. The smokeless loads were at least 800 fps and my blackpowder loads were always a case full of blackpowder.
User avatar
Scott Tschirhart
Advanced Levergunner
Posts: 5133
Joined: Fri Oct 16, 2020 2:56 pm
Location: San Antonio, Texas

Re: Getting the Sights Close on the Shootists Anniversary Gun

Post by Scott Tschirhart »

Easing that rear sight up a half turn at a time. Three shot groups at 30 yards.
You do not have the required permissions to view the files attached to this post.
User avatar
GunnyMack
Advanced Levergunner
Posts: 11093
Joined: Mon Sep 19, 2016 7:57 am
Location: Not where I want to be!

Re: Getting the Sights Close on the Shootists Anniversary Gun

Post by GunnyMack »

Just another half a turn or two and id say you will have it nicely centered.
BROWN LABS MATTER !!
User avatar
Scott Tschirhart
Advanced Levergunner
Posts: 5133
Joined: Fri Oct 16, 2020 2:56 pm
Location: San Antonio, Texas

Re: Getting the Sights Close on the Shootists Anniversary Gun

Post by Scott Tschirhart »

A full turn to raise the impact at 100 a bit.

This gun really shoots! 8 gr 231 250 gr RNFP

Works just fine in the Colt as well.

I like to take my time and shoot a gun over the course of a few weeks before locking everything down.
User avatar
Scott Tschirhart
Advanced Levergunner
Posts: 5133
Joined: Fri Oct 16, 2020 2:56 pm
Location: San Antonio, Texas

Re: Getting the Sights Close on the Shootists Anniversary Gun

Post by Scott Tschirhart »

Final adjustment before the Holiday.

If I have not said it, I’m really impressed with this rifle.
You do not have the required permissions to view the files attached to this post.
Post Reply