Hammer extension BLR

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
Jon49
Levergunner
Posts: 4
Joined: Mon Oct 08, 2007 7:22 am
Location: Missouri

Hammer extension BLR

Post by Jon49 »

Can anyone tell me where I could find a hammer extension for a Browning lever action? The hammer is huge compared to my Marlins. :? Thanks, Jon.
Top
salvo
Senior Levergunner
Posts: 1509
Joined: Mon Sep 03, 2007 3:56 pm
Location: Vegas
Contact:
Contact salvo

Post by salvo »

Brownells has a few.
http://www.brownells.com/aspx/NS/store/ ... 10&si=True

Depending on what model Browning your trying to fit it to, you might have to open up the notch in the extension, with a small file.

Welcome to the fire Jon49!
Top
DavidS
Levergunner 1.0
Posts: 73
Joined: Thu Sep 06, 2007 5:31 pm
Location: N J

Post by DavidS »

I found a hammer extension for my BLR 81 at the local outdoor store.I believe it is made by Uncle Mikes.
David S
Top
Jon49
Levergunner
Posts: 4
Joined: Mon Oct 08, 2007 7:22 am
Location: Missouri

Post by Jon49 »

Thanks salvo, I ordered the Carlson hammer expander since it seemed to have the widest opening. I'll still have to enlarge it some. The hammer is over a half inch wide. Thanks again for your assistance. JP
Top
Post Reply

Return to “General Discussion”