Need help identifying levergun

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
osu007
Levergunner
Posts: 3
Joined: Thu Jun 03, 2021 10:58 pm

Need help identifying levergun

Post by osu007 »

Hello all. As you can see, I am very new here. I’m trying to find out some info about a lever gun presented to me by my best bud whom has cancer. He gave me the gun several years ago and said it was a puma. I never really looked at it. Just shot it. Shoots great with my loads, not hot rides. Anyway, there is no serial number. Shows 050 of 500. And has inter arms on it. Is a stainless large loop round barrel 45 colt, 16” barrel. I will try to attach photos. It is very accurate for me. Thanks for any help as to what it is and it’s value for insurance.
You do not have the required permissions to view the files attached to this post.
User avatar
2ndovc
Advanced Levergunner
Posts: 9323
Joined: Fri Sep 07, 2007 11:59 am
Location: OH, South Shore of Lake Erie

Re: Need help identifying levergun

Post by 2ndovc »

Nice little carbine.

It's a Rossi Model '92 a reproduction of a Winchester Model 1892. It was imported by Interarms from Bazile, probably sometime in the '80s or '90s.

I have one in .357 Magnum and it's one of my favorite knockabout / trail guns.

Sorry to hear about your friend, but he gave you a great gift to remember him by.

jb 8)
jasonB " Another Dirty Yankee"


" Tomorrow the sun will rise. Who knows what the tide could bring?"
User avatar
Griff
Posting leader...
Posts: 20829
Joined: Sat Mar 31, 2007 4:56 pm
Location: OH MY GAWD they installed a STOP light!!!

Re: Need help identifying levergun

Post by Griff »

Exactly! ↑↑↑↑↑
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93

There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
jkbrea
Senior Levergunner
Posts: 1166
Joined: Tue Dec 18, 2007 6:37 pm
Location: S. of Jackson, Wyoming

Re: Need help identifying levergun

Post by jkbrea »

User avatar
fordwannabe
Advanced Levergunner
Posts: 3369
Joined: Thu Apr 02, 2009 8:52 am
Location: Womelsdorf PA

Re: Need help identifying levergun

Post by fordwannabe »

If you have ANY function issues with it STEVE's GUNZ is a miracle worker with the Rossi/Interarms/Puma all the same gun. I have one in 357 fitted with a suppressor. Can't help you with the #50 of 500. The serial number on mine is on the loading gate side in REALLY LITTLE numbers. Welcome to the forum.
a Pennsylvanian who has been accused of clinging to my religion and my guns......Good assessment skills.
User avatar
Blaine
Posting leader...
Posts: 30495
Joined: Mon Dec 17, 2007 2:22 pm
Location: Still Deciding

Re: Need help identifying levergun

Post by Blaine »

Your friend has given you a wonderful keepsake....treasure it by shooting it.
The Rotten Fruit Always Hits The Ground First

Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
piller
Posting leader...
Posts: 15207
Joined: Sat Sep 29, 2007 9:49 pm
Location: South of Dallas

Re: Need help identifying levergun

Post by piller »

That manufacturer is sort of hit or miss on quality. Some are great and some suck. If it has issues, like has already been pointed out, stevesgunz is the best place for help. Yes, you should shoot it. Make sure it is sighted in and have fun with it. It is not valuable enough to be worth leaving in a safe to gather dust.
D. Brian Casady
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
osu007
Levergunner
Posts: 3
Joined: Thu Jun 03, 2021 10:58 pm

Re: Need help identifying levergun

Post by osu007 »

Thanks to all for replies. It is a very smooth and accurate shooter. It is not a safe queen. But it is taken care of. I can not locate a serial number on the side anywhere with the load gate. Also there is no markings as to the 050 of 500. I have short arms but it can be twirled rifleman style without any hiccups. Action and function wise it is as slick as my browning b92 357 mag. Only better. And I like it better than my daughter’s Winchester 94 age saddle ring 44 mag. And the sweet thing about this one is, I got qualified with it as a patrol rifle, and it shoots big boolits. And yes I did have a higher score than a few other officers using fancy “gas” ar’s. I’m old school🤠
44shooter
Levergunner 3.0
Posts: 819
Joined: Wed May 13, 2009 11:55 pm

Re: Need help identifying levergun

Post by 44shooter »

Did you check underneath for a serial number including under the lever?

Nice shooter btw. Looks much handier than my full length rifle
User avatar
CowboyTutt
Advanced Levergunner
Posts: 3714
Joined: Tue Sep 11, 2007 8:27 pm
Location: Mission Viejo, CA

Re: Need help identifying levergun

Post by CowboyTutt »

osu007 wrote: Sat Jun 05, 2021 4:40 pm I can not locate a serial number on the side anywhere with the load gate.
My Rossie 454 clearly has the serial number on the bottom of the receiver. Rossi is a major manufacturer of 1892 rifles. They could not possibly sell it without a serial number.

No way. It would be totally illegal to do so.

Look again.

-Tutt
"It ain't dead! As long as there's ONE COWBOY taking care of ONE COW, it ain't dead!!!" (the Cowboy Way)
-Monte Walsh (Selleck version)

"These battered wings still kick up dust." -Peter Gabriel
765x53
Senior Levergunner
Posts: 1044
Joined: Wed Jan 28, 2009 9:12 pm
Location: Bushwhacker Capitol, Missouri

Re: Need help identifying levergun

Post by 765x53 »

I would guess that 050 of 500 is the serial number.
I have a special edition BP revolver with the serial # 3xx of 1000.
User avatar
CowboyTutt
Advanced Levergunner
Posts: 3714
Joined: Tue Sep 11, 2007 8:27 pm
Location: Mission Viejo, CA

Re: Need help identifying levergun

Post by CowboyTutt »

That actually makes sense. I have an Ithaca limited production pump shot gun and the serial number is LAPD something something. I'm not aware that Rossi made a limited run of anything, but its certainly possible. -Tutt
"It ain't dead! As long as there's ONE COWBOY taking care of ONE COW, it ain't dead!!!" (the Cowboy Way)
-Monte Walsh (Selleck version)

"These battered wings still kick up dust." -Peter Gabriel
Nate Kiowa Jones
Site Sponsor
Posts: 2507
Joined: Fri Sep 07, 2007 12:05 pm
Location: Lampasas, Texas
Contact:

Re: Need help identifying levergun

Post by Nate Kiowa Jones »

765x53 wrote: Sat Jun 05, 2021 9:40 pm I would guess that 050 of 500 is the serial number.
I have a special edition BP revolver with the serial # 3xx of 1000.
Correct,
All of the xx of 500 serialized Rossi 92 style guns were made in the late 90's as a test run. They were Rossi's first attempt at making Stainless guns. Once Rossi saw how popular they became, Rossi continued making them in stainless.
Steve Young aka Nate Kiowa Jones Sass# 6765

Steve's Guns aka "Rossi 92 Specialists"
205 Antler lane
Lampasas, Texas 76550


http://www.stevesgunz.com

Email; steve@stevesgunz.com

Tel: 512-564-1015

Image
Post Reply