"Wonderful Wicked Wadcutters."

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: Hobie, AmBraCol

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
Senior Levergunner
Posts: 1137
Joined: Tue Sep 11, 2007 8:03 pm

"Wonderful Wicked Wadcutters."

#1 Post by wm » Tue Nov 05, 2019 6:12 pm

I'm narrowing down the choice for this little Rossi. I almost have this puzzle figured out.

http://www.dynamicforceinstitute.com/DF ... utters.pdf

Leaning heavily towards HBWC loaded backwards …… but want to try some plated ones.


P.S. Just a refresher ….. the project is to find a place in this world for a lonely, orphan revolver. It's a Interarms 1970s era Rossi model 31 which is a fixed sight, 4" barreled, small frame 5 shot 38 spl revolver. Too big for concealed carry, too small for many uses, not really rated for +P. The project is to find a useful 'combat' load for the little gun so that it can be used for home defense as a 'stash' gun by my work bench in basement or garage. In the end I will settle on a load for this, load up 200 rounds and they will probably sit waiting for that day I hope never comes.

User avatar
Levergunner 2.0
Posts: 123
Joined: Tue Feb 21, 2012 10:13 am
Location: Indianapolis, In.

Re: "Wonderful Wicked Wadcutters."

#2 Post by flightsimmer » Tue Nov 05, 2019 8:58 pm

I once shot a prowler with a 38 spl. loaded with hbwc bullets loaded backwards and it literally turned to shrapnel.
10mm, when you care enough to send the very best.
If possible, so much as it depends on you, be at peace with all men. Rom 12:18

User avatar
Advanced Levergunner
Posts: 9135
Joined: Mon Sep 03, 2007 6:37 pm
Location: Central Fla

Re: "Wonderful Wicked Wadcutters."

#3 Post by Rusty » Tue Nov 05, 2019 11:27 pm

Our Dept. armorer showed me how to load 148 gr HBWC backwards in about 1976. I used them in my snub BUG but stayed with Remington 158 gr JSP in my duty gun as long as I carried the .357. I later moved on to a .41 Mag but stayed with the same BUG.
In one of Jim Cirelo's books he talks about his partner that carried a 1911 .45 ACP. He carried the first round up the spout that was like a full wadcutter in .45. It wouldn't feed from the magazine so it was the first one up and had to be carefully chambered by hand.
If you're gonna be stupid ya gotta be tough-
Isiah 55:8&9

It's easier to fool people than it is to convince them they have been fooled.

User avatar
Advanced Levergunner
Posts: 2194
Joined: Sat Dec 15, 2007 12:46 pm
Location: So. Orygun!

Re: "Wonderful Wicked Wadcutters."

#4 Post by mikld » Wed Nov 06, 2019 10:50 am

I got different results. When I tried the BHBWCs (backward hollow based wadcutters). I shot them into wet newsprint at about 12'. Some just clogged and acted like solids. On some the skirt collapsed, and skewed sideways, and some did open up. But for me the performance was inconsistent. Now one of my house guns gets fed a DEWC cast of about 11-12 BHN, over a max. load of W231 (not +P)...
Vocatus atque non vocatus, Deus aderit...
I've learned how to stand on my own two knees...

Dave James
Levergunner 2.0
Posts: 215
Joined: Sat Sep 08, 2007 2:47 pm
Location: Tidewater VA

Re: "Wonderful Wicked Wadcutters."

#5 Post by Dave James » Fri Nov 08, 2019 9:15 am

The standard wadcutter today is to soft, they need to be hard cast, used to load them up in 38spl, never worried about them working.
At least the Rossi was a better built gun than the Taurus of that period

Post Reply

Who is online

Users browsing this forum: Sarge and 26 guests