Thougts on the 350 Legend?

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
Mainehunter
Senior Levergunner
Posts: 1026
Joined: Thu Sep 06, 2007 5:57 pm
Location: Central Maine

Thougts on the 350 Legend?

Post by Mainehunter »

I know there's been a few posts back in the beginning of the year. I bumped into my wife's relative in town who I haven't seen for a few months. He just picked one up in a Ruger American. He told me his hunting buddy bought one a month ago, shot it and fell in love with it! He's a die hard 35 Rem guy but with his bad shoulder, it kicks a lot less. I'm not looking for one but it looks really interesting. Thoughts :?:

Mainehunter
JB
Senior Levergunner
Posts: 1475
Joined: Tue Dec 11, 2007 3:35 pm
Location: WV

Re: Thougts on the 350 Legend?

Post by JB »

It doesn't hold any interest for me. Companies keep coming out with so many different calibers and the gun writers sing their praises. In a lever gun, the 35 Remington and 30-30 both out perform it. In a bolt action, I can think of lots of calibers I much rather have. The only thing I can see a practical use for it would be in an AR rifle.
Last edited by JB on Sun May 26, 2019 10:00 pm, edited 1 time in total.
Pete44ru
Advanced Levergunner
Posts: 11242
Joined: Sun Sep 02, 2007 7:26 am

Re: Thougts on the 350 Legend?

Post by Pete44ru »

.

+1 - IMO, it's just yet another flavor of the month...… :roll:


.
3leggedturtle
Advanced Levergunner
Posts: 4145
Joined: Fri Dec 21, 2007 11:34 am
Location: north of Palacios about 1400 miles

Re: Thougts on the 350 Legend?

Post by 3leggedturtle »

Id rather find a an original 600 in 350 Rem Mag or 35 Rem. It could be fun tho, lobbing 250gr FP's at 12-1500fps. If it helps to get more lower velocity .35 cal hunting bullets of 170-250grs produced, i'm all for it. Todd/3leg
30/30 Winchester: Not accurate enough fer varmints, barely adequate for small deer; BUT In a 10" to 14" barrelled pistol; is good for moose/elk to 200 yards; ground squirrels to 300 metres

250 Savage... its what the 223 wishes it could be...!
User avatar
AJMD429
Posting leader...
Posts: 31938
Joined: Sun Sep 09, 2007 10:03 am
Location: Hoosierland
Contact:

Re: Thougts on the 350 Legend?

Post by AJMD429 »

I'm all for new stuff....it's all fun....as for 'need' I think we passed that long ago.....! :D
20190524_231458-1.jpg
You do not have the required permissions to view the files attached to this post.
Doctors for Sensible Gun Laws
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.


Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
mickbr
Levergunner 3.0
Posts: 903
Joined: Mon Jan 22, 2018 11:29 pm

Re: Thougts on the 350 Legend?

Post by mickbr »

Id like the idea of a legend shortened to 1 to 1.2", if it would get an accurate pistol sized cart in a bolt action at last. Ruger came close with the 357 and 77/44 but not a great accuracy platform.
wm
Senior Levergunner
Posts: 1379
Joined: Tue Sep 11, 2007 8:03 pm

Re: Thougts on the 350 Legend?

Post by wm »

Often (but not always) I find new cartridges to be a case of reinventing the wheel …… particularly when it comes to appealing to handloaders.

There are exceptions of course …… 7-30 Waters, for example, was described by its inventor as an attempt to duplicate 7X57mm mauser in a lever action was obviously a bit of reinvention but with a purpose.

I don't know much about the 350 Legend but my personal reaction if a 35 Remington was too much for my shoulder would be to pivot towards a 357 magnum lever action and handload some +P or carbine specific hand loads for hunting.

But having said that and again emphasizing my lack of knowledge about the 350 Legend I would say you should take my opinion with a grain of salt. I'm so often late to the party when it comes to new stuff. Hell it was just 15 years ago that I gave the 41 magnum a serious look!!!!! :lol:

Wm
User avatar
COSteve
Advanced Levergunner
Posts: 3851
Joined: Sun Jul 12, 2009 4:03 pm

Re: Thougts on the 350 Legend?

Post by COSteve »

Done
Last edited by COSteve on Thu Dec 17, 2020 5:33 pm, edited 1 time in total.
Steve
Retired and Living the Good Life
No Matter Where You Go, There You Are
User avatar
AJMD429
Posting leader...
Posts: 31938
Joined: Sun Sep 09, 2007 10:03 am
Location: Hoosierland
Contact:

Re: Thougts on the 350 Legend?

Post by AJMD429 »

COSteve wrote: Sat May 25, 2019 1:46 pmI also have a Mini-14 that's a blast to shoot as well and I'd love to see a Mini 350. I think it would be a great item for deer, coyotes, and hogs and I'd snap one up the day it was available. I sent a message to Ruger's CEO asking for a Mini in 350 but it looks like my interest fell on deaf ears.
At least they made 'em in 300 Blackout.... 8)
Doctors for Sensible Gun Laws
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.


Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
wm
Senior Levergunner
Posts: 1379
Joined: Tue Sep 11, 2007 8:03 pm

Re: Thougts on the 350 Legend?

Post by wm »

COSteve wrote: Sat May 25, 2019 1:46 pm I have 2 Rossi leverguns in .357 Mag and love them as my 158grn handloads chrono at 1,952fps in my 20" carbine and 2,005fps in my 24" rifle. I also have a Mini-14 that's a blast to shoot as well and I'd love to see a Mini 350. I think it would be a great item for deer, coyotes, and hogs and I'd snap one up the day it was available. I sent a message to Ruger's CEO asking for a Mini in 350 but it looks like my interest fell on deaf ears.
Well Ruger seems to be dipping a toe into the 350 Legend pool

https://www.thetruthaboutguns.com/2019/ ... 50-legend/

https://www.ammoland.com/2019/04/ruger- ... z5ozBV4D9j

Wm
bikerbeans
Levergunner 1.0
Posts: 88
Joined: Thu Feb 21, 2019 5:39 pm

Re: Thougts on the 350 Legend?

Post by bikerbeans »

The rebated rim brass and undersized 35 cal bullet don't work for me. If you could fire form 223 brass to 350L and load a .358" bullet i think i might have bought one.

BB
piller
Posting leader...
Posts: 15189
Joined: Sat Sep 29, 2007 9:49 pm
Location: South of Dallas

Re: Thougts on the 350 Legend?

Post by piller »

What it seems to me, is an attempt to get a cartridge started in states which only straight wall cartridges are allowed. I got .480 Ruger and .327 Federal caliber guns. Both of those calibers are almost obsolete. I can still get plenty of components for now. This 350 Legend might go the same way. New calibers have a tough row to hoe.
D. Brian Casady
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
KeithNyst
Levergunner 1.0
Posts: 98
Joined: Sat Feb 20, 2016 11:36 pm
Location: NE Minnesota

Re: Thougts on the 350 Legend?

Post by KeithNyst »

Looks to me like a rimless .357 Max. The .357 Max has a very good following in Contenders, especially in states that require short straight-wall cases and there are a few boutique outfits that offer ammo for it.

It will be interesting to see what vendors/platforms offer rifles and pistols for it.
User avatar
6pt-sika
Advanced Levergunner
Posts: 9466
Joined: Wed Dec 19, 2007 7:15 pm
Location: Virginia

Re: Thougts on the 350 Legend?

Post by 6pt-sika »

I’m not against anything new(or old) . And lord knows I’ve tried more then my fair share of the new at the time stuff and still do now to a lesser degree , but the 350 Legend doesn’t do it for me . When word first came out a few months back I was somewhat intrested , but like many others it passed . Again I have nothing against it , just don’t deem it as one I wanna mess with .
Parkers , Mannlicher Schoenauer’s , 6.5mm's and my family in the Philippines !
Rusty
Advanced Levergunner
Posts: 9528
Joined: Mon Sep 03, 2007 6:37 pm
Location: Central Fla

Re: Thougts on the 350 Legend?

Post by Rusty »

If you don't live in a state that requires straight walled cartridges for deer they wouldn't be of any interest to you. If you do live in a state that requires a straight walled case for deer you now have the ability to shoot deer on a Ruger bolt action or an AR Platform.
I personally would rather have a .357 Max in either a lever, bolt, or single shot.
If you're gonna be stupid ya gotta be tough-
Isiah 55:8&9

It's easier to fool people than it is to convince them they have been fooled.
User avatar
6pt-sika
Advanced Levergunner
Posts: 9466
Joined: Wed Dec 19, 2007 7:15 pm
Location: Virginia

Re: Thougts on the 350 Legend?

Post by 6pt-sika »

Rusty wrote: Sun May 26, 2019 12:41 am If you don't live in a state that requires straight walled cartridges for deer they wouldn't be of any interest to you. If you do live in a state that requires a straight walled case for deer you now have the ability to shoot deer on a Ruger bolt action or an AR .
Now that I don’t consider totally correct either . I live in a state that doesn’t make any out of the ordinary requirements . By no means are shotgun slugs or buckshot required but I mess with them in a PLETHORA of guns both on paper and deer !
4C2A9D2C-5DF6-48CC-AF86-6389D0AA506C.jpeg
38B5503B-9FBB-477A-BA31-17608C964D7B.jpeg
BA17A093-424D-4C1D-9780-A1C48FFDE7A4.jpeg
B6A2FC98-0F69-4F58-83FD-140169B69224.jpeg
5D45EA2D-9106-422B-A858-EAD9FF172B56.jpeg
You do not have the required permissions to view the files attached to this post.
Parkers , Mannlicher Schoenauer’s , 6.5mm's and my family in the Philippines !
BenT
Advanced Levergunner
Posts: 2716
Joined: Thu Sep 06, 2007 9:21 pm
Location: Northern Wisconsin

Re: Thougts on the 350 Legend?

Post by BenT »

COSteve wrote: Sat May 25, 2019 1:46 pm I have 2 Rossi leverguns in .357 Mag and love them as my 158grn handloads chrono at 1,952fps in my 20" carbine and 2,005fps in my 24" rifle. I also have a Mini-14 that's a blast to shoot as well and I'd love to see a Mini 350. I think it would be a great item for deer, coyotes, and hogs and I'd snap one up the day it was available. I sent a message to Ruger's CEO asking for a Mini in 350 but it looks like my interest fell on deaf ears.
Steve I am with you at this one. I like shooting my 1907 Winchster and I want a replacement to drag on the 4 wheeler through the woods and I think a mini 14 in 350 would be the ticket. Right now I have settled on a PC Carbine for the 4 wheeler.
Mainehunter
Senior Levergunner
Posts: 1026
Joined: Thu Sep 06, 2007 5:57 pm
Location: Central Maine

Re: Thougts on the 350 Legend?

Post by Mainehunter »

BenT wrote: Sun May 26, 2019 8:19 pm
COSteve wrote: Sat May 25, 2019 1:46 pm I have 2 Rossi leverguns in .357 Mag and love them as my 158grn handloads chrono at 1,952fps in my 20" carbine and 2,005fps in my 24" rifle. I also have a Mini-14 that's a blast to shoot as well and I'd love to see a Mini 350. I think it would be a great item for deer, coyotes, and hogs and I'd snap one up the day it was available. I sent a message to Ruger's CEO asking for a Mini in 350 but it looks like my interest fell on deaf ears.
Steve I am with you at this one. I like shooting my 1907 Winchster and I want a replacement to drag on the 4 wheeler through the woods and I think a mini 14 in 350 would be the ticket. Right now I have settled on a PC Carbine for the 4 wheeler.
I love shooting my lever guns in "traditional" platforms 30-30, 35 Rem, 358 Win etc, etc.. I don't think I'll ever buy one in 350L if they ever come out with one, maybe bolt action just to try BUT if Ruger puts one out in a mini 14, I'm in!!!

Mainehunter
Post Reply