CASTING BULLETS .... LOADING AMMO

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
User avatar
JimT
Shootist
Posts: 5468
Joined: Thu Sep 06, 2007 5:04 pm

CASTING BULLETS .... LOADING AMMO

Post by JimT »

It's raining so it is an indoors day. Spending it in the shop, casting bullets and loading ammunition. I cast a bunch of the RCBS 250 KT .44 Semi-Wadcutter bullets... sized and lubed them. Loaded them in brand new unfired SHOOTISTS-headstamped brass. Winchester Large Pistol primers. 16.5 gr. 2400

Image

Image

They will be fired in John Taffin's honor (he just had a birthday). I will use my Shootists Anniversary USFA .44 Special. I promised John I will not shoot at anything closer than 200 yards.

Image
.45colt
Advanced Levergunner
Posts: 4719
Joined: Fri Sep 07, 2007 5:00 am
Location: North Coast of America-Ohio

Re: CASTING BULLETS .... LOADING AMMO

Post by .45colt »

Awesome Jim, I bet Elmer Keith would sure approve!!
User avatar
ollogger
Advanced Levergunner
Posts: 2794
Joined: Mon Jul 05, 2010 2:47 pm
Location: Wheatland Wyoming
Contact:

Re: CASTING BULLETS .... LOADING AMMO

Post by ollogger »

awesome hand gun & some fine ammo to go with it!!
nice here so just came in from unloading some ammo


Brad
Chuck 100 yd
Advanced Levergunner
Posts: 6972
Joined: Tue Apr 03, 2007 8:52 pm
Location: Ridgefield WA. USA

Re: CASTING BULLETS .... LOADING AMMO

Post by Chuck 100 yd »

:D
JerryB
Advanced Levergunner
Posts: 5493
Joined: Mon Apr 02, 2007 9:23 pm
Location: Batesville,Arkansas

Re: CASTING BULLETS .... LOADING AMMO

Post by JerryB »

Those are some beautiful bullets. How much are per hundred???? I know you don't cast to sell, but that is a fine bullet in one of my favorite calibers.
JerryB II Corinthians 3:17, Now the Lord is that Spirit: and where the Spirit of the Lord is, there is liberty.

JOSHUA 24:15
User avatar
JimT
Shootist
Posts: 5468
Joined: Thu Sep 06, 2007 5:04 pm

Re: CASTING BULLETS .... LOADING AMMO

Post by JimT »

JerryB wrote: Fri May 04, 2018 8:51 pm Those are some beautiful bullets. How much are per hundred???? I know you don't cast to sell, but that is a fine bullet in one of my favorite calibers.
They run a little over 3 1/2 pounds per hundred. (Pounds weight, not pound sterling)
:D
piller
Posting leader...
Posts: 15188
Joined: Sat Sep 29, 2007 9:49 pm
Location: South of Dallas

Re: CASTING BULLETS .... LOADING AMMO

Post by piller »

That looks as if you had a thoroughly enjoyable day. 200 yards with a handgun is pretty good shooting. I hope those bullets fly straight and true.
D. Brian Casady
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
User avatar
Griff
Posting leader...
Posts: 20803
Joined: Sat Mar 31, 2007 4:56 pm
Location: OH MY GAWD they installed a STOP light!!!

Re: CASTING BULLETS .... LOADING AMMO

Post by Griff »

piller wrote: Sat May 05, 2018 9:51 amThat looks as if you had a thoroughly enjoyable day. 200 yards with a handgun is pretty good shooting. I hope those bullets fly straight and true.
+1.
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93

There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
M. M. Wright
Advanced Levergunner
Posts: 4296
Joined: Wed Sep 15, 2010 12:57 pm
Location: Vinita, I.T.

Re: CASTING BULLETS .... LOADING AMMO

Post by M. M. Wright »

That is one fine lookin' pistol Jim. And I like the look of that bullet. Should be a real hammer.
M. M. Wright, Sheriff, Green county Arkansas (1860)
Currently living my eternal life.
NRA Life
SASS
ITSASS
Bill in Oregon
Advanced Levergunner
Posts: 8846
Joined: Sun Jun 29, 2008 10:05 am
Location: Sweetwater, TX

Re: CASTING BULLETS .... LOADING AMMO

Post by Bill in Oregon »

Jim, I am casting that bullet for my Bisley Flattop in .44 Special, but so far just using Universal. I guess I need to lay in a pound of 2400 for old times' sake.
There is not much left that I need to do that can't be done with that bullet at 1,000-1,100 fps.
User avatar
JimT
Shootist
Posts: 5468
Joined: Thu Sep 06, 2007 5:04 pm

Re: CASTING BULLETS .... LOADING AMMO

Post by JimT »

Bill in Oregon wrote: Sat May 05, 2018 6:05 pm Jim, I am casting that bullet for my Bisley Flattop in .44 Special, but so far just using Universal. I guess I need to lay in a pound of 2400 for old times' sake.
There is not much left that I need to do that can't be done with that bullet at 1,000-1,100 fps.
THAT is for sure!!
User avatar
J Miller
Member Emeritus
Posts: 14880
Joined: Sat Mar 31, 2007 7:46 pm
Location: Not in IL no more ... :)

Re: CASTING BULLETS .... LOADING AMMO

Post by J Miller »

Jim,

Nice: Pistol, bullet, cartridge.

I don't have a .44 of any persuasion, but I shoot a lot of Keith bullets from my 45s.

It can't beat.

Joe
***Be sneaky, get closer, bust the cap on him when you can put the ball where it counts ;) .***
Post Reply