94 AE Trapper half cock conversion
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
94 AE Trapper half cock conversion
I've had this little 44 carbine for a while. Always hated the rebounding hammer. Most info on conversion involve using the original lower tang with lockwork from ser.#4.8 million up to 5.5 million (I think). Some of these parts are nearly impossible to find now and I got tired of looking.
The earlier, post 64 leaf spring lower tang parts, I had mostly sourced from a buddy. These lower tangs also use the smaller hammer screw like the AE. The difference is that it has the tenons like the pre-64 that lock in the frame.
Here is a pic of the original, and planned replacement lower tang assemblies.
Then, I filed the tenons off so the replacement lower tang would fit in the AE reciever.
Once that was done, I cold blued the lower where the work was done, assembled it, and put it in the rifle.
Presto! The 94 Trapper as it should be!
The earlier, post 64 leaf spring lower tang parts, I had mostly sourced from a buddy. These lower tangs also use the smaller hammer screw like the AE. The difference is that it has the tenons like the pre-64 that lock in the frame.
Here is a pic of the original, and planned replacement lower tang assemblies.
Then, I filed the tenons off so the replacement lower tang would fit in the AE reciever.
Once that was done, I cold blued the lower where the work was done, assembled it, and put it in the rifle.
Presto! The 94 Trapper as it should be!
"Oh bother", said Pooh, as he chambered another round.
- Griff
- Posting leader...
- Posts: 20803
- Joined: Sat Mar 31, 2007 4:56 pm
- Location: OH MY GAWD they installed a STOP light!!!
Re: 94 AE Trapper half cock conversion
Yeah! Good job.
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
Re: 94 AE Trapper half cock conversion
Thanks Griff. Keep thinking I want a top eject post 64 trapper in 30-30 now. I like your Legendary Lawman.
You'd think 12 30-30s woild be enough?
Go figger.
You'd think 12 30-30s woild be enough?
Go figger.
"Oh bother", said Pooh, as he chambered another round.
- 2ndovc
- Advanced Levergunner
- Posts: 9302
- Joined: Fri Sep 07, 2007 11:59 am
- Location: OH, South Shore of Lake Erie
Re: 94 AE Trapper half cock conversion
Cool!
jb
jb
jasonB " Another Dirty Yankee"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
Re: 94 AE Trapper half cock conversion
Thanks Jason.
"Oh bother", said Pooh, as he chambered another round.
- Sixgun
- Posting leader...
- Posts: 18563
- Joined: Sun Sep 16, 2007 7:17 pm
- Location: S.E. Pa. Where The Finest Winchesters & Colts Reside
Re: 94 AE Trapper half cock conversion
Neato Jay.....I tell ya..those rednecks in Maine know how to simplify about any mechanical item. I once saw a guy upstate who turned an old toilet into a barbecue grill just by adding a grate from an old refrigerator to set the steak on. He filled the water holding tank on the back of the toilet with ice to hold his beer in. With this combination cooler, grill, and toilet, he had an old piece of asbestos in front of the tank to keep the ice from melting. After cooking and drinking he washed it all down and used the toilet for what it was meant for......funniest thing I ever saw.
There's just something' about a rebounding hammer that annoys me and others who are used to the traditional hammer/sear arrangement to no end. Probably another reason I don't own any but you Jay, being a connoisseur of fine traditional leverguns have found a fine and lasting fix. GOOD WORK YOUNG MAN!!!! ----6
There's just something' about a rebounding hammer that annoys me and others who are used to the traditional hammer/sear arrangement to no end. Probably another reason I don't own any but you Jay, being a connoisseur of fine traditional leverguns have found a fine and lasting fix. GOOD WORK YOUNG MAN!!!! ----6
Re: 94 AE Trapper half cock conversion
Hey, thanks bro! Yeah, bein' an old school kinda hick, I just couldn't leave it be. It came out pretty good I though. It's the only post 64 I have.
I mean hey, I only have 2 post war examples, and one of those is unfired.
I mean hey, I only have 2 post war examples, and one of those is unfired.
"Oh bother", said Pooh, as he chambered another round.
Re: 94 AE Trapper half cock conversion
Great job on that conversion Jay.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
Re: 94 AE Trapper half cock conversion
Thank you Lenn!. Thats a compliment coming from a dude crafty as you!
"Oh bother", said Pooh, as he chambered another round.
Re: 94 AE Trapper half cock conversion
Good job on the conversion! What brand is that rear sight you have there?
Have you hugged your rifle today?
Re: 94 AE Trapper half cock conversion
Thank you very much. The rear sight is an XS. This rifle has been a guinea pig for many, many sighting experiments. Scopes, both long and standard eye relief, red dots, and irons. This, by far, is the best setup. The factory front sight on these trappers are excellent. Thankfully, it didn't need to be changed
This is my first 50yd shots after mounting the XS. Only leaned against the truck door.
This is my first 50yd shots after mounting the XS. Only leaned against the truck door.
"Oh bother", said Pooh, as he chambered another round.
- Ji in Hawaii
- Senior Levergunner
- Posts: 1980
- Joined: Sat Jan 15, 2011 1:05 pm
- Location: Moku Manu, Hawai'i
Re: 94 AE Trapper half cock conversion
Great job adapting what you have to work with, looks great. When I did my 94AE trapper 357 mag I'm guessing 15 years ago those lowers were easier to find and I'm guessing cheaper too even allowing for inflation. My lower tang and hammer were also leaf spring but a later run so pretty much a direct bolt in replacement. I also installed an XS Ghost Ring which back then was called the AO (Ashley Outdoors) Ghost Ring sight. I have been totally happy with my Trapper the trigger pull dropping from a tad gritty but decent 4 pounds down to a silky smooth 2.5 pounds.
Illegitimus Non Carborundum
Akā, ʻo ka poʻe hilinaʻi aku iā Iēhova, e ulu hou nō ko lākou ikaika;
E piʻi ʻēheu aku nō lākou i luna, e like me nā ʻaito;
E holo nō lākou, ʻaʻole hoʻi e māloʻeloʻe,
E hele mua nō lākou, ʻaʻole hoʻi e maʻule.
`Isaia 40:31
Akā, ʻo ka poʻe hilinaʻi aku iā Iēhova, e ulu hou nō ko lākou ikaika;
E piʻi ʻēheu aku nō lākou i luna, e like me nā ʻaito;
E holo nō lākou, ʻaʻole hoʻi e māloʻeloʻe,
E hele mua nō lākou, ʻaʻole hoʻi e maʻule.
`Isaia 40:31
- J Miller
- Member Emeritus
- Posts: 14880
- Joined: Sat Mar 31, 2007 7:46 pm
- Location: Not in IL no more ... :)
Re: 94 AE Trapper half cock conversion
Not to brag, but I did that to my 94AE waayyyyyyyy back in 87 or 88. I might have been one of the first to do it too. Posted a tech article about doing it on Beartooth Shooters forum back in 2002.
https://www.beartoothbullets.com/tech_n ... tes.htm/42
Gadzooks, I didn't realize it had been so long ago.
Getting rid of that abominable bouncy hammer action was the best thing I did with that little lever gun.
Joe
https://www.beartoothbullets.com/tech_n ... tes.htm/42
Gadzooks, I didn't realize it had been so long ago.
Getting rid of that abominable bouncy hammer action was the best thing I did with that little lever gun.
Joe
***Be sneaky, get closer, bust the cap on him when you can put the ball where it counts .***
Re: 94 AE Trapper half cock conversion
I think I saw that article, Joe. I haven't had this carbine near that long. I traded into it ten years or so ago. I liked the way it shot and carried but simply detested the hammer.
I mostly used it for snowshoeing and woods loafing. Now it has a new lease on life. I actually wouldn't mind another in 30-30, but the earlier top eject version.
I mostly used it for snowshoeing and woods loafing. Now it has a new lease on life. I actually wouldn't mind another in 30-30, but the earlier top eject version.
"Oh bother", said Pooh, as he chambered another round.
Re: 94 AE Trapper half cock conversion
Good shootin pard.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
Re: 94 AE Trapper half cock conversion
Thanks old buddy!
"Oh bother", said Pooh, as he chambered another round.