Just picked up a B92 hammer and firing pin for converting...

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: Hobie, AmBraCol

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
Message
Author
kaschi
Levergunner 3.0
Posts: 639
Joined: Thu Dec 20, 2007 8:24 pm

Just picked up a B92 hammer and firing pin for converting...

#1 Post by kaschi » Wed Feb 14, 2018 10:26 pm

...a Winchester 1892 Rifle (44-40) with rebounding hammer to its ("way it should have been") original configuration. I'm hoping the firing pin will work. It was available so figured better grab it while it was there.

SamL Colt
Levergunner
Posts: 7
Joined: Sun Feb 18, 2018 3:56 am

Re: Just picked up a B92 hammer and firing pin for converting...

#2 Post by SamL Colt » Sun Feb 18, 2018 4:03 am

Just curious where you found the parts to replace the rebounding hammer etc? SamL Colt
Samuel Colt Walker
Gunsmith, bar owner

kaschi
Levergunner 3.0
Posts: 639
Joined: Thu Dec 20, 2007 8:24 pm

Re: Just picked up a B92 hammer and firing pin for converting...

#3 Post by kaschi » Fri Feb 23, 2018 11:49 pm

Believe it or not I found them on EBay. It was sort of a lucky find in that when I made an initial search, only a couple of items were displayed. Then oddly on the same day, I tried different wording and those items appeared.

Post Reply

Who is online

Users browsing this forum: 2ndovc, OldWin, Sixgun, zack coyote and 8 guests