New Winchester 25/35
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
- earlmck
- Advanced Levergunner
- Posts: 3428
- Joined: Tue Nov 30, 2010 12:10 am
- Location: pert-neer middle of Oregon
New Winchester 25/35
My newly minted Winchester 1894 showed up here last week just in time for me to abandon it and go deer hunting with a couple old friends. I did get some stuff ordered (dies, brass) before I left so it arrived this week. Lee dies, real purty Hornady cases courtesy of Natchez Shooters Supply. Here's some of the brass with a couple of the likely bullets -- Hornady 117 gr. RN and Sierra 90 gr. BTHP
Here's the rifle -- take away the scope bases and the towel it is resting on and it'd be about 7 1/2 pounds.
This is the model with 24" half-round half-octagon barrel
More to report after I've done some shooting. Anyone had luck with cast bullets and the 25/35? And this 8" twist they are reported to have -- I was sceptical but yep, that's what it is.You do not have the required permissions to view the files attached to this post.
The greatest patriot...
is he who heals the most gullies. Patrick Henry
is he who heals the most gullies. Patrick Henry
-
- Advanced Levergunner
- Posts: 5493
- Joined: Mon Apr 02, 2007 9:23 pm
- Location: Batesville,Arkansas
Re: New Winchester 25/35
Earl, that is a good looking rifle. Years ago I owned an old Remington model 14 in 25 Remington, real pleasant caliber to shoot.
JerryB II Corinthians 3:17, Now the Lord is that Spirit: and where the Spirit of the Lord is, there is liberty.
JOSHUA 24:15
JOSHUA 24:15
- AJMD429
- Posting leader...
- Posts: 32043
- Joined: Sun Sep 09, 2007 10:03 am
- Location: Hoosierland
- Contact:
Re: New Winchester 25/35
Wow.....that's a beaut....!
Didn't think any new-mfg guns could be so appealing.
Didn't think any new-mfg guns could be so appealing.
Doctors for Sensible Gun Laws
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.
Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.
Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
- GunnyMack
- Advanced Levergunner
- Posts: 10065
- Joined: Mon Sep 19, 2016 7:57 am
- Location: Not where I want to be!
Re: New Winchester 25/35
Real nice lookin shootin iron! I'm very surprised at the wood, looks great!
BROWN LABS MATTER !!
- 2ndovc
- Advanced Levergunner
- Posts: 9323
- Joined: Fri Sep 07, 2007 11:59 am
- Location: OH, South Shore of Lake Erie
Re: New Winchester 25/35
Very nice. Can't wait to hear about how it shoots. I've been looking at those too.
jb
jb
jasonB " Another Dirty Yankee"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
Re: New Winchester 25/35
Looks nice. Surprised, and glad, they are chambering. 23-35. Never woulda thunkit.
Can't wait to see how it shoots.
Can't wait to see how it shoots.
"Oh bother", said Pooh, as he chambered another round.
-
- Advanced Levergunner
- Posts: 8941
- Joined: Sun Jun 29, 2008 10:05 am
- Location: Sweetwater, TX
Re: New Winchester 25/35
Earl, I see you have added another lovely lever gun to your collection. Congratulations on the chambering.
I plan to try the GS Custom monometal FP in my .25-35 Tomcat. I hear great things about this bullet in field use.
http://www.gscustomusa.com/orderfnusa.html
I plan to try the GS Custom monometal FP in my .25-35 Tomcat. I hear great things about this bullet in field use.
http://www.gscustomusa.com/orderfnusa.html
Last edited by Bill in Oregon on Sun Oct 08, 2017 7:31 pm, edited 1 time in total.
Re: New Winchester 25/35
That`s a real beauty alright, congrats and good shootin.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
- Rube Burrows
- Advanced Levergunner
- Posts: 2088
- Joined: Tue Oct 19, 2010 12:27 pm
- Location: Louisiana
Re: New Winchester 25/35
Beautiful rifle.
- ollogger
- Advanced Levergunner
- Posts: 2802
- Joined: Mon Jul 05, 2010 2:47 pm
- Location: Wheatland Wyoming
- Contact:
Re: New Winchester 25/35
That is a dandy looking gun!! ive not had success shooting cast bullets in the 25-35s or 250 savage ive tried
the bullets were just 85 gr, may be heavier would work better but never went there, have a few others I shoot cast in
the speer 75 gr. fp is a blast to shoot & takes a antelope slick & clean but it never dawned on me to try the 90 gr. sierra
in the 25-35, although I shoot it in a 250 - 3000 that has a slow twist & does well in it, so im gonna load some in the 25-35
and thanks for the tip!!
Brad
the bullets were just 85 gr, may be heavier would work better but never went there, have a few others I shoot cast in
the speer 75 gr. fp is a blast to shoot & takes a antelope slick & clean but it never dawned on me to try the 90 gr. sierra
in the 25-35, although I shoot it in a 250 - 3000 that has a slow twist & does well in it, so im gonna load some in the 25-35
and thanks for the tip!!
Brad
- earlmck
- Advanced Levergunner
- Posts: 3428
- Joined: Tue Nov 30, 2010 12:10 am
- Location: pert-neer middle of Oregon
Re: New Winchester 25/35
I don't know if it's a tip or not, Brad. I don't have many of those 117 round noses and I do have a couple boxes of the 90 Sierras (that I also use in the 14" twist 250 Savage). So it gives me something to play with in the new rifle.
My little bit of messin' around with the new baby has been verrry interesting. I loaded up a couple "ladders" using 4064 and LVR just to see how the velocities were running and if I hit any indications of "that's enough powder". These test loads were done with the left-over 25/35 cases I had from a (so far) failed try-out of a 22 hi-power, and using the 250 Savage dies to round-out the new necks and then seat bullets.
When I got back from that little test session my 25/35 dies and additional cases had showed up, so I made up some rounds (of mostly the Hornady 117's but a couple Sierra 90's) to shoot for sighting and and grouping. So now I used the 25/35 dies to round-out the new case necks and seat the bullets. This time the bullets seated easier (too easy I thought) so belatedly I miked the expanders to see what was going on. The 250 expander mikes .2555 and the new 25/35 miked .257 (or maybe .2568?) Anyway, a bit large for jacketed bullets though I will happily use it for the cast bullets most likely. Maybe should have pulled the bullets and re-done the necks but didn't really think it would make all that much difference and I was loading singly so didn't need to worry about the bullet slipping in the neck.
Would you believe... it looks like I got 100 to 150 fps lower velocities with the lesser neck tension? The LVR took the biggest hit but the 4064 took a big hit also. I'll have to re-do the shooting with proper neck tensions. But so far with those lower velocity loads I found that the new baby likes: And it really dislikes: .
I only had two loads with the 90 grain Sierra and these were both in the in-between category -- the "let's try again" category.
I put the neck expander from the 250 die in the 25/35 sizer (they are both Lee's) and produced another batch with better neck tension. Further report to come I'm sure.
Oh yeah, I meant to say that those are 50 yard groups so not nearly as satisfactory as if they'd been 100 yard groups. And so the 27/LVR was really bad
You do not have the required permissions to view the files attached to this post.
The greatest patriot...
is he who heals the most gullies. Patrick Henry
is he who heals the most gullies. Patrick Henry
-
- Advanced Levergunner
- Posts: 8941
- Joined: Sun Jun 29, 2008 10:05 am
- Location: Sweetwater, TX
Re: New Winchester 25/35
Those two loads look promising. Eager to see how they perform with additional neck tension.
- 264 Win Mag
- Levergunner 1.0
- Posts: 86
- Joined: Tue Dec 18, 2007 7:47 pm
- Location: Alabama
Re: New Winchester 25/35
Promising looking groups. Very anxious to hear what you come up with the 117gr Hornady's as I have had little luck with them. I figured with the 1:8 twist they would be just the ticket for my rifle. I have never been able to get what I would call decent groups from the rifle but the most promising were with 80gr Ranch Dog cast using H4227.
Yours is a better looking rifle also.
Thomas
Yours is a better looking rifle also.
Thomas
- Old Savage
- Posting leader...
- Posts: 16716
- Joined: Mon Sep 03, 2007 3:43 pm
- Location: Southern California
Re: New Winchester 25/35
Jeff Quinn has an article on Gunblast with the one I have. Very accurate.
- 264 Win Mag
- Levergunner 1.0
- Posts: 86
- Joined: Tue Dec 18, 2007 7:47 pm
- Location: Alabama
Re: New Winchester 25/35
Just bought some IMR4064 so will give it a try. Isn't it great to be able to go to the store and come back with what you went for? Some of my past threads for this rifle contained suggestions for bullets or powder I was unable to find. Also now have LVR and 2400 so will load up some 117gr Hornady's with all three powders and see what happens. This rifle has fought me more than any other rifle I have ever owned. Hoping to resolve my issues once and for all. Very interested to see what Earlmck comes up with and try it in my rifle.
Thomas
Thomas
- earlmck
- Advanced Levergunner
- Posts: 3428
- Joined: Tue Nov 30, 2010 12:10 am
- Location: pert-neer middle of Oregon
Re: New Winchester 25/35
I am badly remiss in my duties: I was going to spend some time with the new baby and make a proper report. Got out one time and the wind was blowing so hard it blew my chronograph over. I got just enough shooting done to find that what I thought was proper neck tension got me wider velocity deviation than the "too little" tension of the previous session.
Meanwhile I got my attention diverted by some elk hunting and (mostly) laying in the winter firewood. Sorry 'bout that, fellow levergunners -- I shall return.
Meanwhile I got my attention diverted by some elk hunting and (mostly) laying in the winter firewood. Sorry 'bout that, fellow levergunners -- I shall return.
The greatest patriot...
is he who heals the most gullies. Patrick Henry
is he who heals the most gullies. Patrick Henry
Re: New Winchester 25/35
All the buzz on the internet about new cartridges and fast tist. The 25-35 is the Godfather of fast twist. The original 1/8 twist and it was developed in 1895. I have killed everything from Grizzly bears to gophers with a 25-35...
- 264 Win Mag
- Levergunner 1.0
- Posts: 86
- Joined: Tue Dec 18, 2007 7:47 pm
- Location: Alabama
Re: New Winchester 25/35
Impressive Shrapnel. My rifle is such a handy one if I can finally find a good load for it I think it would be just the ticket for the deer and hogs here in South Alabama. This rifle has fought me more than any other one I have owned.
Thomas
Thomas
- earlmck
- Advanced Levergunner
- Posts: 3428
- Joined: Tue Nov 30, 2010 12:10 am
- Location: pert-neer middle of Oregon
Re: New Winchester 25/35
Very impressive use of a 25/35, Shrapnel. And a nice looking one you have -- which of course you would. I had no idea the little cartridge might be grizzly medicine!
Somehow the 1:8 twist of these rifles had escaped my attention and it surprised me when I read about it (after I'd sent for this one). And then I had the thought that "I'll bet these newly manufactured things use a more normal 10" twist". But the cleaning rod makes almost 3 revolutions when putting a patch down the 24" barrel, so -- 8" it is. Nevertheless, on my windy outing last week I did appear to get 50 yard tin can plinking accuracy out of my little 70 grain 25/20 bullet with all three loads I tried.
And Thomas, what sort of loads have your used that are not working for you? Does your rifle have a good bore? I know I have never got very decent accuracy from my two 25 Remingtons, but they both have nasty looking bores. I think people used to think they didn't need to clean 22 rimfires or 25 cal. rifles -- they seem to me to have an abnormally dismal percentage of rasty-looking bores in the old 25 cals I have examined.
I went to a gun show a couple months ago and a fellow had several model 99 Savages at moderate price levels. His 303 Savage had a decent bore; his 300 Savage had a really clean bore; and two 25/35's (onto which I was ready to leap!) looked really nasty. And that is totally Par for my 25 cal. course.
Somehow the 1:8 twist of these rifles had escaped my attention and it surprised me when I read about it (after I'd sent for this one). And then I had the thought that "I'll bet these newly manufactured things use a more normal 10" twist". But the cleaning rod makes almost 3 revolutions when putting a patch down the 24" barrel, so -- 8" it is. Nevertheless, on my windy outing last week I did appear to get 50 yard tin can plinking accuracy out of my little 70 grain 25/20 bullet with all three loads I tried.
And Thomas, what sort of loads have your used that are not working for you? Does your rifle have a good bore? I know I have never got very decent accuracy from my two 25 Remingtons, but they both have nasty looking bores. I think people used to think they didn't need to clean 22 rimfires or 25 cal. rifles -- they seem to me to have an abnormally dismal percentage of rasty-looking bores in the old 25 cals I have examined.
I went to a gun show a couple months ago and a fellow had several model 99 Savages at moderate price levels. His 303 Savage had a decent bore; his 300 Savage had a really clean bore; and two 25/35's (onto which I was ready to leap!) looked really nasty. And that is totally Par for my 25 cal. course.
The greatest patriot...
is he who heals the most gullies. Patrick Henry
is he who heals the most gullies. Patrick Henry
Re: New Winchester 25/35
The only way to go is with the Hornady 117 grain round nose with IMR 3031 with around 24 grains. It is real hard on the liver...
-
- Advanced Levergunner
- Posts: 8941
- Joined: Sun Jun 29, 2008 10:05 am
- Location: Sweetwater, TX
Re: New Winchester 25/35
The performance of the 117-RN seems to be a case of performing beyond the paper ballistics, according to many who have used it. Francis Sell sure liked it for supplying blacktail meat to the Oregon coast logging camps between the wars. Oddly, the Hodgdon data site does not list a load for 3031 with the 117, nor do they list a load with LeveRevolution. But they do show 2404 fps with 28.5 of the new CFE 223.
Earl, hope you get that elk!
Earl, hope you get that elk!
- 264 Win Mag
- Levergunner 1.0
- Posts: 86
- Joined: Tue Dec 18, 2007 7:47 pm
- Location: Alabama
Re: New Winchester 25/35
Earlmck,earlmck wrote: ↑Sun Oct 22, 2017 7:05 pm
And Thomas, what sort of loads have your used that are not working for you? Does your rifle have a good bore? I know I have never got very decent accuracy from my two 25 Remingtons, but they both have nasty looking bores. I think people used to think they didn't need to clean 22 rimfires or 25 cal. rifles -- they seem to me to have an abnormally dismal percentage of rasty-looking bores in the old 25 cals I have examined.
Had too many loads both cast and jacketed that went wrong to list. My best load with the 117 Hornady was 23 grains of H335 which hit 1.65" at 75 yards. Best cast loads were with the 80gr Ranch Dog and Alliant 2400 and Green Dot. Both powders gave 60 yard groups in the 1.4" range.
The rifle by the way was a bought new Winchester Trails End Hunter and has a brite bore. Have changed the scope base, scope rings, and for good measure the scope!
Tell me if I'm wrong but I think a scoped rifle should do better than an inch and a half at 60 yards from a bench.
Thomas