Treinta-Treinta

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
User avatar
BruceB
Levergunner 2.0
Posts: 248
Joined: Sat Sep 01, 2007 10:27 am
Location: So Cal

Treinta-Treinta

Post by BruceB »

Is there a "standard" load for 150 grain .30-30 like there is for.45 Colt (8.5 gr Unique/ 250 gr. SWC)?
Last edited by BruceB on Sun Oct 23, 2016 3:42 pm, edited 1 time in total.
GOD SAVE THE UNITED STATES!

Original member of Leverguns.com forum

NRA Life Member

Boy, what a mess them .45's make.

When seconds mean life or death, the police are only minutes away.
jdad
Advanced Levergunner
Posts: 3434
Joined: Fri Sep 07, 2007 7:55 am
Location: Oregon

Re: Treinta-Treinta

Post by jdad »

Specifics Man! Specifics........cast or jacketed? :wink:
I know a whole lot about very little and nothing about a whole lot.
User avatar
BruceB
Levergunner 2.0
Posts: 248
Joined: Sat Sep 01, 2007 10:27 am
Location: So Cal

Re: Treinta-Treinta

Post by BruceB »

jdad wrote:Specifics Man! Specifics........cast or jacketed? :wink:
Jacketed
GOD SAVE THE UNITED STATES!

Original member of Leverguns.com forum

NRA Life Member

Boy, what a mess them .45's make.

When seconds mean life or death, the police are only minutes away.
1894cfan
Senior Levergunner
Posts: 1493
Joined: Tue Sep 11, 2007 1:07 am

Re: Treinta-Treinta

Post by 1894cfan »

MY standard load is 34.5gr 748 under Win 150PP. YMMV HTH
Last edited by 1894cfan on Sun Oct 23, 2016 9:58 pm, edited 1 time in total.
User avatar
Griff
Posting leader...
Posts: 20803
Joined: Sat Mar 31, 2007 4:56 pm
Location: OH MY GAWD they installed a STOP light!!!

Re: Treinta-Treinta

Post by Griff »

If'n I ain't mistaken, it's 30 grains of IMR 3031!
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93

There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
Chuck 100 yd
Advanced Levergunner
Posts: 6972
Joined: Tue Apr 03, 2007 8:52 pm
Location: Ridgefield WA. USA

Re: Treinta-Treinta

Post by Chuck 100 yd »

Yes, the 3031 load has been the standby forever. Not an old standby but my favorite is Varget and my
Most accurate full power .30-30 , .22-250 , .243 And .308 loads use it.
jdad
Advanced Levergunner
Posts: 3434
Joined: Fri Sep 07, 2007 7:55 am
Location: Oregon

Re: Treinta-Treinta

Post by jdad »

34.5g of W748
I know a whole lot about very little and nothing about a whole lot.
JerryB
Advanced Levergunner
Posts: 5493
Joined: Mon Apr 02, 2007 9:23 pm
Location: Batesville,Arkansas

Re: Treinta-Treinta

Post by JerryB »

Me too, 34.5 gr 748 all my Treinta-Treinta carbines like that load.
JerryB II Corinthians 3:17, Now the Lord is that Spirit: and where the Spirit of the Lord is, there is liberty.

JOSHUA 24:15
1894cfan
Senior Levergunner
Posts: 1493
Joined: Tue Sep 11, 2007 1:07 am

Re: Treinta-Treinta

Post by 1894cfan »

jdad wrote:34.5g of W748

Must be a good load if it's mentioned more than once. :mrgreen:
User avatar
J Miller
Member Emeritus
Posts: 14880
Joined: Sat Mar 31, 2007 7:46 pm
Location: Not in IL no more ... :)

Re: Treinta-Treinta

Post by J Miller »

<<<<<<<<<<<<< WAYYYYYYYY Back in the good old days, I was told the standard go to load for the 30-30 was: 170gr JSP = 30 grs IMR 3031, 150 gr JSP = 31 grs IMR 3031. Matches up see, 30 and 31 grs of 3031 powder. :D
This was of course with the original DUPONT powder, I don't know if that still applies with the currently made IMR powder.

AND THEN ....... I found one of Winchesters little load data booklets and it said 34.5 grs of 748 with the 150 gr bullet. That was back in the 70's, 1970s :roll: . A long time ago. I've used that load ever since. It's been a perfect load in every 30-30 I've shot it in. :mrgreen:

Joe
***Be sneaky, get closer, bust the cap on him when you can put the ball where it counts ;) .***
flatnose
Levergunner 3.0
Posts: 610
Joined: Tue Sep 18, 2007 4:24 pm

Re: Treinta-Treinta

Post by flatnose »

I agree with the above powders. If the rifle does not shoot well with these loads, there is something wrong with it, or the shooter.
Bill in Oregon
Advanced Levergunner
Posts: 8849
Joined: Sun Jun 29, 2008 10:05 am
Location: Sweetwater, TX

Re: Treinta-Treinta

Post by Bill in Oregon »

I started out with 3031 when I first started reloading in 1970 for the Marlin .30-30 my dad bought for me through the mail from Herter's.
I have since come to prefer the velocity and accuracy of 748.
william iorg
Levergunner 2.0
Posts: 243
Joined: Fri Aug 31, 2007 7:50 pm

Re: Treinta-Treinta

Post by william iorg »

Griff wrote:If'n I ain't mistaken, it's 30 grains of IMR 3031!
In the Golden Olden days of my youth - the 1960's IMR 3031 was THE powder for the .30-30 in the leverguns. Back in those days we used 34.0 grains as maximum for the 150-grain bullets but this load has been backed off at least 2.0 grains in modern times. Back then we thought this load gave us 2,400 fops in the 20" barrels.

For the 170-grain bullets we used 31.0 grains of 3031 as maximum. Everyone used 30.0 grains as standard maximum because it was easier to compress than the 31.0 grain load. We figured this load as giving up about 2,000 fops from the 20" barrels. This load has also been backed off about 2.0 grains.
Slim
User avatar
BruceB
Levergunner 2.0
Posts: 248
Joined: Sat Sep 01, 2007 10:27 am
Location: So Cal

Re: Treinta-Treinta

Post by BruceB »

Thank you gentlemen. I'll try both 3031 and 748 and see which one works best for me. :)
GOD SAVE THE UNITED STATES!

Original member of Leverguns.com forum

NRA Life Member

Boy, what a mess them .45's make.

When seconds mean life or death, the police are only minutes away.
Post Reply