Front Sights?

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
rwt
Levergunner
Posts: 22
Joined: Mon Jan 25, 2010 11:31 pm
Location: SE Michigan

Front Sights?

Post by rwt »

I have read a number of posts complaining about being unable to shoot good groups at 100 yards due to difficulty seeing the sights with old eyes.

I'm in the same camp. I can't see the front sight clearly for very long, if at all.

The XO front sight with a white vertical stripe is praised by some.

Has anyone found a solution without going to a fiber optic or nite sight setup?
User avatar
Tycer
Advanced Levergunner
Posts: 7690
Joined: Sun Sep 02, 2007 10:17 am
Location: Asheville, NC

Re: Front Sights?

Post by Tycer »

I use a blued post front with Merit aperture best with a round bull.
Kind regards,
Tycer
----------------------------------------------------------------
http://www.saf.org - https://peakprosperity.com/ - http://www.guntalk.com
User avatar
AJMD429
Posting leader...
Posts: 31931
Joined: Sun Sep 09, 2007 10:03 am
Location: Hoosierland
Contact:

Re: Front Sights?

Post by AJMD429 »

For serious visibility and lots of options, a Lyman Globe sight up front is helpful.

Or just replace both sights with a Burris Fastfire-II... :D
Doctors for Sensible Gun Laws
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.


Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
User avatar
Blaine
Posting leader...
Posts: 30495
Joined: Mon Dec 17, 2007 2:22 pm
Location: Still Deciding

Re: Front Sights?

Post by Blaine »

One of my favorite set ups is a HiViz front, and a ghost ring back. "Almost" like a "dot" sight if you use the ghost ring properly.
The Rotten Fruit Always Hits The Ground First

Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
Merle
Levergunner 3.0
Posts: 786
Joined: Tue Sep 03, 2013 8:40 pm

Re: Front Sights?

Post by Merle »

For guns without a readily changeable front sight, I paint it flat neon green, the color highway workers wear. For best results, apply a base coat of white. For most eyes, neon (or fluorescent) green gives the best all around visibility. Plus, it's easy to remove/change if you don't like it. :wink:
Merle from PA
User avatar
stew71
Senior Levergunner
Posts: 1214
Joined: Fri Feb 22, 2008 5:19 pm
Location: Sacramento, Ca

Re: Front Sights?

Post by stew71 »

Merle wrote:For guns without a readily changeable front sight, I paint it flat neon green, the color highway workers wear. For best results, apply a base coat of white. For most eyes, neon (or fluorescent) green gives the best all around visibility. Plus, it's easy to remove/change if you don't like it. :wink:
Sigh. I may do this to my M1 and M1A. Took 'em to the range recently and couldn't see sight blades clearly as I used to. The easiest sights to use for me are the St. Marie diopters I installed on my Swiss K31. Easy peasy out to 500m on the steel range.
Some people just need a sympathetic pat on the head.....with a hammer. Repeatedly.
Merle
Levergunner 3.0
Posts: 786
Joined: Tue Sep 03, 2013 8:40 pm

Re: Front Sights?

Post by Merle »

stew71 wrote:
Merle wrote:For guns without a readily changeable front sight, I paint it flat neon green, the color highway workers wear. For best results, apply a base coat of white. For most eyes, neon (or fluorescent) green gives the best all around visibility. Plus, it's easy to remove/change if you don't like it. :wink:
Sigh. I may do this to my M1 and M1A. Took 'em to the range recently and couldn't see sight blades clearly as I used to. The easiest sights to use for me are the St. Marie diopters I installed on my Swiss K31. Easy peasy out to 500m on the steel range.

For me the Springfield & Krag razor thin sights are all but invisible - they are so narrow that even paint doesn't help. :(
Merle from PA
User avatar
stew71
Senior Levergunner
Posts: 1214
Joined: Fri Feb 22, 2008 5:19 pm
Location: Sacramento, Ca

Re: Front Sights?

Post by stew71 »

Merle wrote:
stew71 wrote:
Merle wrote:For guns without a readily changeable front sight, I paint it flat neon green, the color highway workers wear. For best results, apply a base coat of white. For most eyes, neon (or fluorescent) green gives the best all around visibility. Plus, it's easy to remove/change if you don't like it. :wink:
Sigh. I may do this to my M1 and M1A. Took 'em to the range recently and couldn't see sight blades clearly as I used to. The easiest sights to use for me are the St. Marie diopters I installed on my Swiss K31. Easy peasy out to 500m on the steel range.

For me the Springfield & Krag razor thin sights are all but invisible - they are so narrow that even paint doesn't help. :(
Arg...I've forgotten about my 1903.....its a mix-master shooter so I may swap that out as well....
Some people just need a sympathetic pat on the head.....with a hammer. Repeatedly.
Pete44ru
Advanced Levergunner
Posts: 11242
Joined: Sun Sep 02, 2007 7:26 am

Re: Front Sights?

Post by Pete44ru »

rwt wrote:
I have read a number of posts complaining about being unable to shoot good groups at 100 yards due to difficulty seeing the sights with old eyes.


Has anyone found a solution without going to a fiber optic or nite sight setup ?

A fiber optic front sight works, so I would respectfully suggest you stop fighting so hard against success.

(I'm 75, and can still shoot/hunt with an FO frontsight and a receiver peepsight (with the aperture removed after initial zeroing).


.
Pisgah
Senior Levergunner
Posts: 1797
Joined: Thu Sep 06, 2007 9:01 pm
Location: SC

Re: Front Sights?

Post by Pisgah »

My favorite is a silver blade front sight. I buy the blanks from Dixie Gun Works, file them to whatever shape I want and height I need.

https://www.dixiegunworks.com/product_i ... qdsqtgn410
Nate Kiowa Jones
Site Sponsor
Posts: 2507
Joined: Fri Sep 07, 2007 12:05 pm
Location: Lampasas, Texas
Contact:

Re: Front Sights?

Post by Nate Kiowa Jones »

Pete44ru wrote:
rwt wrote:
I have read a number of posts complaining about being unable to shoot good groups at 100 yards due to difficulty seeing the sights with old eyes.


Has anyone found a solution without going to a fiber optic or nite sight setup ?

A fiber optic front sight works, so I would respectfully suggest you stop fighting so hard against success.

(I'm 75, and can still shoot/hunt with an FO frontsight and a receiver peepsight (with the aperture removed after initial zeroing).


.
Yep, If you want to see the front the Peeps are the answer.

I saved this article about peep sights written back in the late 40’s by the famous Col. Townsend Whelen. Notice the aperture rear/aperture front.
Why choose a peep sight for Rifles?
Col.Townsend Whelen

All military battle rifles and many "Dangerous Game Guns" have been fitted with peep sights for at least the last 70 years. There is a good reason for this. They are the fastest and most accurate iron sight you can put on your rifle.


Image





(This 375 H+H has been used on Cape Buffalo, Lions, Elephants and other dangerous game in Zimbabwe for over 50 years. Note the aperture rear sight. It never fogs, breaks, loosens, or goes out of adjustment.)

Here is some information on sighting errors as put forth by no less than, Col.Townsend Whelen, in his book on reloading, "Why Not Load Your Own," published in 1949 when the use of telescopic sights was a rarity. With normal eyesight, either naturally or corrected by glasses, he found that the following list applied at a distance of 100 yards:

Open Rear Sight: Accuracy is unpredictable due to lighting conditions (shoots away from side lighting, and high for overhead mid-day conditions).
Aperture Rear, Gold or Ivory front: 1.5 -2"
Aperture Rear, Black Post front: 1"
Aperture Rear, Aperture front: 1/2 to 3/4"
2-1/2x Scope: 1/4-1/2"
6x Scope: 1/8" to 1/4"
10x Scope: 1/16" to 1/8"
20x Scope: Practically None.
As you can see from the information above, the ability to sight using a aperture sight exceeds the accuracy of most rifles.
His statement,"Open Rear Sight: Accuracy is unpredictable due to lighting conditions (shoots away from side lighting, and high for overhead mid-day conditions)." is true of open fronts as well. Fiber op and painted fronts are good for up close and fast. But, for serious accuracy not so much.
Steve Young aka Nate Kiowa Jones Sass# 6765

Steve's Guns aka "Rossi 92 Specialists"
205 Antler lane
Lampasas, Texas 76550


http://www.stevesgunz.com

Email; steve@stevesgunz.com

Tel: 512-564-1015

Image
User avatar
Griff
Posting leader...
Posts: 20803
Joined: Sat Mar 31, 2007 4:56 pm
Location: OH MY GAWD they installed a STOP light!!!

Re: Front Sights?

Post by Griff »

Some forms of competition don't allow the use of painted front sights... or even painted rear sights. Aperture rear and front help, but if I have to change back for competition, they're of no use.
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93

There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
rwt
Levergunner
Posts: 22
Joined: Mon Jan 25, 2010 11:31 pm
Location: SE Michigan

Re: Front Sights?

Post by rwt »

Thanks. I am very used to aperture sights. Began using them in 1960 when I started shooting NRA postal matches with a Remington target rifle.

How rugged are the fiber optic sights??? Are the hi viz sights equally good as FO?
Nate Kiowa Jones
Site Sponsor
Posts: 2507
Joined: Fri Sep 07, 2007 12:05 pm
Location: Lampasas, Texas
Contact:

Re: Front Sights?

Post by Nate Kiowa Jones »

rwt wrote:Thanks. I am very used to aperture sights. Began using them in 1960 when I started shooting NRA postal matches with a Remington target rifle.

How rugged are the fiber optic sights??? Are the hi viz sights equally good as FO?
They are the same thing and neither one will hold up even as well as a brass bead. The element is plastic.
Steve Young aka Nate Kiowa Jones Sass# 6765

Steve's Guns aka "Rossi 92 Specialists"
205 Antler lane
Lampasas, Texas 76550


http://www.stevesgunz.com

Email; steve@stevesgunz.com

Tel: 512-564-1015

Image
User avatar
AJMD429
Posting leader...
Posts: 31931
Joined: Sun Sep 09, 2007 10:03 am
Location: Hoosierland
Contact:

Re: Front Sights?

Post by AJMD429 »

rwt wrote:Thanks. I am very used to aperture sights. Began using them in 1960 when I started shooting NRA postal matches with a Remington target rifle.

How rugged are the fiber optic sights??? Are the hi viz sights equally good as FO?
Pretty tough. You can change to a new filament (and new color of desired) in less than a minute and spare fibers are cheap.
Doctors for Sensible Gun Laws
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.


Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
User avatar
marlinman93
Advanced Levergunner
Posts: 6432
Joined: Sun Apr 01, 2007 3:40 pm
Location: Oregon

Re: Front Sights?

Post by marlinman93 »

My eyes aren't what they used to be either. But I find a good globe front, with a thin post aperture, combined with a peep rear sight, makes a good picture for my shooting.
Pre WWI Marlins and Singleshot rifles!
http://members.tripod.com/~OregonArmsCollectors/
Rusty
Advanced Levergunner
Posts: 9528
Joined: Mon Sep 03, 2007 6:37 pm
Location: Central Fla

Re: Front Sights?

Post by Rusty »

There is a company called TESTORS that makes paint for model airplanes and such. I have used their traffic yellow since 1975 on all my front sights.
If you're gonna be stupid ya gotta be tough-
Isiah 55:8&9

It's easier to fool people than it is to convince them they have been fooled.
User avatar
Sixgun
Posting leader...
Posts: 18563
Joined: Sun Sep 16, 2007 7:17 pm
Location: S.E. Pa. Where The Finest Winchesters & Colts Reside

Re: Front Sights?

Post by Sixgun »

I had my optician put a half power bifocal on the top of the lense of my shooting glasses on my dominate eye. The front sight is as clear as it was when I was a youngster. The target is a bit fuzzy but that's ok. Works for me.---6
Model A Uzi’s
Image
User avatar
AJMD429
Posting leader...
Posts: 31931
Joined: Sun Sep 09, 2007 10:03 am
Location: Hoosierland
Contact:

Re: Front Sights?

Post by AJMD429 »

Sixgun wrote:I had my optician put a half power bifocal on the top of the lense of my shooting glasses on my dominate eye. The front sight is as clear as it was when I was a youngster. The target is a bit fuzzy but that's ok. Works for me.---6
That's a cool idea.....do you have a picture of the glasses.....? Do they just use 'super-glue' or something like that to glue a chunk of extra lens to your regular specs...??? (...If so, I'm thinking of a do-it-yourself project using a pair of my old glasses and some dime-store reading glasses...)
Doctors for Sensible Gun Laws
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.


Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
flatnose
Levergunner 3.0
Posts: 610
Joined: Tue Sep 18, 2007 4:24 pm

Re: Front Sights?

Post by flatnose »

I have upgraded to tang sights, with globe front and aperture disc fitted. Next thing I will try are clip on sunglasses with a pinhole drilled through the lense, simulating a diopter.
User avatar
FWiedner
Advanced Levergunner
Posts: 8862
Joined: Sat Sep 08, 2007 9:50 pm
Location: North Texas

Re: Front Sights?

Post by FWiedner »

I like the XO white-line front sight and a ghost-ring rear inside 100yds.

But past 75 yards I admit to needing glass.

:oops:
Government office attracts the power-mad, yet it's people who just want to be left alone to live life on their own terms who are considered dangerous.

History teaches that it's a small window in which people can fight back before it is too dangerous to fight back.
User avatar
Tycer
Advanced Levergunner
Posts: 7690
Joined: Sun Sep 02, 2007 10:17 am
Location: Asheville, NC

Re: Front Sights?

Post by Tycer »

flatnose wrote:I have upgraded to tang sights, with globe front and aperture disc fitted. Next thing I will try are clip on sunglasses with a pinhole drilled through the lens, simulating a diopter.
Have you looked at the Merit #4 apertures? They are adjustable.

http://www.meritcorporation.com/products.html
Kind regards,
Tycer
----------------------------------------------------------------
http://www.saf.org - https://peakprosperity.com/ - http://www.guntalk.com
User avatar
Sixgun
Posting leader...
Posts: 18563
Joined: Sun Sep 16, 2007 7:17 pm
Location: S.E. Pa. Where The Finest Winchesters & Colts Reside

Re: Front Sights?

Post by Sixgun »

AJMD429 wrote:
Sixgun wrote:I had my optician put a half power bifocal on the top of the lense of my shooting glasses on my dominate eye. The front sight is as clear as it was when I was a youngster. The target is a bit fuzzy but that's ok. Works for me.---6
That's a cool idea.....do you have a picture of the glasses.....? Do they just use 'super-glue' or something like that to glue a chunk of extra lens to your regular specs...??? (...If so, I'm thinking of a do-it-yourself project using a pair of my old glasses and some dime-store reading glasses...)

Doc,
It's a pretty much simple thing. The eye doctor ground in a new lenses a bifocal on the top that is half the power of the bifocal that I use for reading that's on the bottom of the lense. I used an old pair of glasses and you will see the bifocal on the top of the LEFT lense which is my dominate eye.

My regular glasses for everyday use have progressive lenses and you can't see the line on those.

I made an appointment and before I went I got a piece of wood about the length of a rifle that was about 1x1" and installed a tang sight on the close end and a front sight on the far end. Then he put these lenses in front of my face until the front sight came into focus. The power we decided on was half of my regular bifocal that's on the bottom.

They ground the lense with the top bifocal and the bottom bifocal with normal distance vision in the middle. It takes a while getting used to looking through it but it really helps a whole lot. The target is somewhat fuzzy which is fine. I only use these glasses for sighting in groups and competition where fine accuracy is needed.

They charged me $160....money well spent :D -------6





Image
Model A Uzi’s
Image
Pete44ru
Advanced Levergunner
Posts: 11242
Joined: Sun Sep 02, 2007 7:26 am

Re: Front Sights?

Post by Pete44ru »

AJMD429 wrote:
rwt wrote:

How rugged are the fiber optic sights??? Are the hi viz sights equally good as FO?
Pretty tough. You can change to a new filament (and new color of desired) in less than a minute and spare fibers are cheap.


Williams Gun Sight Co, for one, sells a front sight hood that has an open "ceiling" that allows light to enter a fiber optic rod from the side, as they were designed.

"FO" is simply an abbreviation of "Fiber Optic", with FO front sights of various heights & colors are made/sold by several different entities - Williams (FireSight), Tru-Glo, H-Viz, New England Custom Gun (NECG), T/C, and others.

FO front sights are available in the same multiple heights that Lyman/Marbles/etc sights are; are available in several different colors, to allow for different folk's color perception (red, orange, green, lime, yellow, with, etc, etc); and are also available with either of the two bead diameters that Ivory, Gold & Brass bead front sights made by Lyman/Marbles/etc ( 1/16"- "fine", and 3/32" - coarse).


FWIW, there's quite a few shooters than have long been using receiver peep sight - the wrong way...........................

The correct use is to look "through" the peep aperture (Ghost ring or smaller) "AT" the front sight, placing the front sight on a target that somewhat out of focus.

IMHO, if a shooter cannot see the front sight blade with proper peepsight usage, optical correction is indicated (eyeglass Rx, Merit adjustable aperture, etc).



.
Chuck 100 yd
Advanced Levergunner
Posts: 6972
Joined: Tue Apr 03, 2007 8:52 pm
Location: Ridgefield WA. USA

Re: Front Sights?

Post by Chuck 100 yd »

Front sight you say......I wondered what that bump on the end of the barrel is for. :? So , I am supposed to be able to see it and the target at the same time. I am going to have to try that. What a novel idea!
Post Reply