I have some unusual cases I cannot identify.
These were mixed in with a bunch of 45-70 cases, altered to 40-82.
These are made from 375 H&H cases, with the belt turned down.
Here is approximate dimensions
Length - 2.4" / 60.98mm
outside of case mouth - .424" / 10.78mm
diameter of base - .525" / 13.4mm
The altered 40-82 rounds have a large rim,
so were these supposed to work, even without the rim????
Thanks
Good Shootin!!
DarryH
need cartridge info
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
-
Griff
- Posting leader...
- Posts: 20825
- Joined: Sat Mar 31, 2007 4:56 pm
- Location: OH MY GAWD they installed a STOP light!!!
Re: need cartridge info
Pictures?
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
-
william iorg
- Levergunner 2.0
- Posts: 243
- Joined: Fri Aug 31, 2007 7:50 pm
Re: need cartridge info
I could not find this thread after several tries. I started a new thread asking where it was. Thanks for pointing me in the right direction - several thanks....
I posted a drawing but would like to see a picture of your formed case.
I posted a drawing but would like to see a picture of your formed case.
Slim