What's this 336 30WCF worth?
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
What's this 336 30WCF worth?
Apparently, I have an inflated idea of the value of my 30-30. It's a Marlin 336 Texan in every way except it isn't stamped "Texan" on the barrel, and the serial number has no "T" suffix. I put Skinner front and rear sights on it, and I have the original sights. It's got only minor blemishes from use. It's JM stamped, and has no safety other than half-cock. In my experience, it is actually harder to find than a Texan!
I like it a lot, and don't really want to sell it, but I never use it. Twice now, folks have scoffed at my price of $600, and didn't bother to counter-offer. What's this rifle worth?
Thanks, folks!
Edit: Mine has a 20" barrel... isn't that what a Texan has?
If you double-click on the image, you can view other pictures.
I like it a lot, and don't really want to sell it, but I never use it. Twice now, folks have scoffed at my price of $600, and didn't bother to counter-offer. What's this rifle worth?
Thanks, folks!
Edit: Mine has a 20" barrel... isn't that what a Texan has?
If you double-click on the image, you can view other pictures.
Re: What's this 336 30WCF worth?
I wouldn't scoff at that price. Seems reasonable to me.
NRA Life Member
Re: What's this 336 30WCF worth?
Thanks, Ted...
I've seen Texans on GB with 18.5" barrels. Didn't they normally come with 20" barrels?
I've seen Texans on GB with 18.5" barrels. Didn't they normally come with 20" barrels?
Re: What's this 336 30WCF worth?
I'd offer 500.....NICE shooter
The Rotten Fruit Always Hits The Ground First
Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
Re: What's this 336 30WCF worth?
One straight-gripped Marlin 336 can be hard to distinguish from other straight-gripped Marlin 336's, since there were several variations - like the 336T, 336DT, 336TS.MacEntyre wrote:Apparently, I have an inflated idea of the value of my 30-30. It's a Marlin 336 Texan in every way except it isn't stamped "Texan" on the barrel, and the serial number has no "T" suffix. I put Skinner front and rear sights on it, and I have the original sights. It's got only minor blemishes from use. It's JM stamped, and has no safety other than half-cock. In my experience, it is actually harder to find than a Texan!
I like it a lot, and don't really want to sell it, but I never use it. Twice now, folks have scoffed at my price of $600, and didn't bother to counter-offer. What's this rifle worth?
Thanks, folks!
Edit: Mine has a 20" barrel... isn't that what a Texan has?
If you double-click on the image, you can view other pictures.
The earlier 20" barreled .30-30 & .35 Rem Model 336T Texan's had a rounded lever (1954-83) & some years also with a saddle ring (1965-71).
The 18-1/2" barreled earlier Model 336T Texan was offered only in 1983.
The same earlier Model 336T Texan was also offered in .44 Mag (1965-67) with a 20" bbl.
There was also a 1962-63 Model 336DT Deluxe Texan in .30-30 & .35 Rem, with upgraded & carved (a pic of Texas) buttstock.
Then there was also a 1984-87 Model 336TS, which was offered only in .30-30, with a squared lever & no saddle ring, & only with an 18-1/2" bbl.
The earlier 20" Model 336T's in .30-30 usually change hands for around $$500-$550.
The eralier 20" Model 336T's in .35 Rem usually change hands for around $550-$600.
The earlier 18-1/2" Model 336T's usually change hands for about $600 (.30-30), or $650-$700 (.35).
The later 18-1/2" Model 336TS's usually change hande in the $450-$500 range.
(BTW - The rarer 16-1/4" barreled straight-grip Model 336 Marauder is usually $700-$750 in .30-30, or $750+ in .35.)
Your straight-grip Marlin is interesting, because it has a Model 338TS square lever, no saddle ring, AND a 20" bbl, supposedly not available on the 336TS.
I would SN date your rifle's DOM (by the SN prefix letter) to find out if it's either 1954-83 Model 336T or a 1984-87 Model 336TS, before I would venture an estimated value other than I posted above.
.
Re: What's this 336 30WCF worth?
No prefix in the SN... 230783XX... on the barrel, "Model 336" without suffix. I guess it's an oddity!Pete44ru wrote: Your straight-grip Marlin is interesting, because it has a Model 338TS square lever, no saddle ring, AND a 20" bbl, supposedly not available on the 336TS.
I would SN date your rifle's DOM (by the SN prefix letter) to find out if it's either 1954-83 Model 336T or a 1984-87 Model 336TS, before I would venture an estimated value other than I posted above.
Sure wish I could find one in 35 Rem.
Last edited by MacEntyre on Fri Oct 10, 2014 11:50 am, edited 1 time in total.
Re: What's this 336 30WCF worth?
Pete, if it was a 84-87 as you suggest, wouldn't it have the cross bolt safety?Pete44ru wrote:I would SN date your rifle's DOM (by the SN prefix letter) to find out if it's either 1954-83 Model 336T or a 1984-87 Model 336TS, before I would venture an estimated value other than I posted above.
.
NRA Life Member
Re: What's this 336 30WCF worth?
oldguns.net says it was made in 1977.
- Streetstar
- Advanced Levergunner
- Posts: 3873
- Joined: Sun Jan 11, 2009 5:58 am
- Location: from what used to be Moore OK
Re: What's this 336 30WCF worth?
Can't offer much help on value --- but i sure do like the rifle -- i was complaining in another thread today about not getting along well with the pistol grip on a Marlin youth rifle i have
----- Doug
Re: What's this 336 30WCF worth?
Thank you very much, Streetstar... I don't own any rifles with pistol grips.
Re: What's this 336 30WCF worth?
TedH wrote:Pete, if it was a 84-87 as you suggest, wouldn't it have the cross bolt safety?Pete44ru wrote:I would SN date your rifle's DOM (by the SN prefix letter) to find out if it's either 1954-83 Model 336T or a 1984-87 Model 336TS, before I would venture an estimated value other than I posted above.
.
Yeah (the Marlin CBS started in 1983) - I'm thinkin' that someone installed a post-1984 squared lever on a 1977 Model 336T.
.
Re: What's this 336 30WCF worth?
Maybe I should find a round one... I like 'em better anyway. They have a more vintage look.Pete44ru wrote:I'm thinkin' that someone installed a post-1984 squared lever on a 1977 Model 336T.
Re: What's this 336 30WCF worth?
I like it. That's how all 336's shoulda looked to me.
Of course, Gentlemen prefer straight grips.
Of course, Gentlemen prefer straight grips.
"Oh bother", said Pooh, as he chambered another round.
- KirkD
- Desktop Artiste
- Posts: 4406
- Joined: Sat Apr 07, 2007 6:52 am
- Location: Central Ontario, Canada
- Contact:
Re: What's this 336 30WCF worth?
I really like that Marlin. I just bought a real nice one made in 1975, with original scope, for $500 earlier this year. Most collectors seem to want pre-WW II rifles for their collection, so its collector's value would be not too great. Its value as a real nice shooting rifle, however, would certainly be there in my mind. I have seen quite a few Marlin 30-30's of that era for sale but I do not recall one advertised for as high as $600. They tend to be more in the $400 to $500 range if they are really nice. I would think $450 is a fair average price, but $500 is quite possible given the nice condition of your carbine. If you lived up here in Canada, I'd be talking to you about a price .... I really like your Marlin and could use another one or two.
Kirk: An old geezer who loves the smell of freshly turned earth, old cedar rail fences, wood smoke, a crackling fireplace on a snowy evening, pristine wilderness lakes, the scent of
cedars and a magnificent Whitetail buck framed in the semi-buckhorn sights of a 120-year old Winchester.
Blog: https://www.kirkdurston.com/
cedars and a magnificent Whitetail buck framed in the semi-buckhorn sights of a 120-year old Winchester.
Blog: https://www.kirkdurston.com/
Re: What's this 336 30WCF worth?
Thanks, ya'll... I'm convinced I should keep it.KirkD wrote:I really like your Marlin and could use another one or two.
I remember how long I looked for a straight stocked Marlin. It looked much better when I first got it... all the blemishes are mine, from carrying it in the woods, trying to walk up deer. I traded a shooter Colt Woodsman for it about 7 or 8 years ago. The Woodsman is worth more at this time, but the Marlin is one of the most accurate rifles I've shot. At the time, I had a "rattler" 1965 Winchester 94 in 30-30, and the comparison when I got the Marlin was so stark, I sold the Winchester!
Re: What's this 336 30WCF worth?
The only 336 frame I am aware of with a "T" is the 444T. Texans weren't marked with a "T" but referred to as the Texan model. Some have told me their 336-44 was stamped with a "T" but I have never seen one. The early Texans had straight round levers that changed to square in the early 70's. I have owned both 18.5 & 20" models. I had 2 Texans converted to COWBOYS, a 70 & 71 model. Both have saddle rings. I have converted several other models into Texans, the most recent is a Glenfield 30A as I prefer the capped forend. It appears you have a Texan built after 1970. CBS came along in the early 80s.
Value? $400 -600
TomF
Value? $400 -600
TomF
Re: What's this 336 30WCF worth?
Don't some have "336 Texan" on the barrel?TomF wrote:Texans weren't marked with a "T" but referred to as the Texan model.
Re: What's this 336 30WCF worth?
There are the Cowboy and Octagon 336s labeled as such. The only "Texan" I know marked is the 1897 Texan (22). Later models were the TS and LTS and so stamped. If a 336 marked "T" or TEXAN is out there, please post a picture of it. That'd clear things up a bunch. These may be as scarce as the 444 Magnum.MacEntyre wrote:Don't some have "336 Texan" on the barrel?TomF wrote:Texans weren't marked with a "T" but referred to as the Texan model.
http://www.marlinowners.com/forum/336/4 ... exans.html
TomF
Re: What's this 336 30WCF worth?
Update on value..........I just saw a Texan in a local gunshop, '64 YOM, 30-30, round lever, RC stamped, typical BB gun rear sight, ramp front, smooth action (I like used levers) condition was 75-80% for $425 asking price. I'd buy them all if I could....................
TomF
TomF