loads for 38-55 Cowboy
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
loads for 38-55 Cowboy
Has anybody developed loads for the 38-55 using Lyman 375296 ?
Re: loads for 38-55 Cowboy
Yep, long, long time ago... 28 gr. IMR 3031.
Sincerely,
Hobie
"We are all travelers in the wilderness of this world, and the best that we find in our travels is an honest friend." Robert Louis Stevenson
Hobie
"We are all travelers in the wilderness of this world, and the best that we find in our travels is an honest friend." Robert Louis Stevenson
-
- Levergunner 2.0
- Posts: 185
- Joined: Tue Dec 18, 2007 1:11 am
- Location: NE Washington USA
Re: loads for 38-55 Cowboy
Welcome and greetings to a fellow Washingtonian.
NRA Benefactor Member
My mind is like a steel trap,
rusty and illegal in 37 states.
My mind is like a steel trap,
rusty and illegal in 37 states.
- kimwcook
- Advanced Levergunner
- Posts: 7978
- Joined: Tue Sep 04, 2007 10:01 pm
- Location: Soap Lake, WA., U.S.A.
Re: loads for 38-55 Cowboy
I can't answer your question, but I can welcome you to the forum. Welcome. What part of Washington State do you hail from. As you can see under my avatar, I'm from Soap Lake.
Old Law Dawg
Re: loads for 38-55 Cowboy
was gonna ask the same.kimwcook wrote:I can't answer your question, but I can welcome you to the forum. Welcome. What part of Washington State do you hail from. As you can see under my avatar, I'm from Soap Lake.
oh yeah , welcome.
careful what you wish for, you might just get it.
"BECAUSE I CAN"
"BECAUSE I CAN"
Re: loads for 38-55 Cowboy
Thanks to all who have responded. I am from Central Washington. Wapato on the reservation.
Re: loads for 38-55 Cowboy
Wow Hobie that is exactly what I use in my 38-55 loads. Works great and is very accurate.
Mine are 2.501 OAL, 260grain .378dia LFNGC Cast performance bullets. 28 Grains IMR 3031.
Works great in my guns.
Mine are 2.501 OAL, 260grain .378dia LFNGC Cast performance bullets. 28 Grains IMR 3031.
Works great in my guns.
Andrew: He is a real gun freak with way too many guns to shoot or clean.
Re: loads for 38-55 Cowboy
conger wrote:Thanks to all who have responded. I am from Central Washington. Wapato on the reservation.
Welcome to our forum, there is a great amount of info to be had on this site.
You can learn just about anything on here. Again welcome to our forum.
Andrew: He is a real gun freak with way too many guns to shoot or clean.
Re: loads for 38-55 Cowboy
I use that same bullet, the 260gr LFNGC, as my hunting bullet of choice. The only difference is that I fuel it with 30.0gr of H-4198. It is accurate as well as deadly.......
All the usual warnings apply.......
All the usual warnings apply.......
Re: loads for 38-55 Cowboy
Welcome. What brass are you using? What length? Thanks, 1886.
- Borregos
- Advanced Levergunner
- Posts: 4756
- Joined: Thu Sep 13, 2007 7:40 am
- Location: Ontario, Canada
Re: loads for 38-55 Cowboy
I have no experience with the 38-55, but welcome to the forum, you will enjoy it here
Pete
Sometimes I wonder if it is worthwhile gnawing through the leather straps to get up in the morning..................
Sometimes I wonder if it is worthwhile gnawing through the leather straps to get up in the morning..................
-
- Advanced Levergunner
- Posts: 6972
- Joined: Tue Apr 03, 2007 8:52 pm
- Location: Ridgefield WA. USA
Re: loads for 38-55 Cowboy
Welcome!
Re: loads for 38-55 Cowboy
Hobie wrote:Yep, long, long time ago... 28 gr. IMR 3031.
+1
and howdy
LETS GO SHOOT'N BOYS
Re: loads for 38-55 Cowboy
10 grains of trailboss- light target load