Pistol caliber?

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
JerryW
Levergunner
Posts: 6
Joined: Tue Dec 25, 2007 11:59 am

Pistol caliber?

Post by JerryW »

Will a 357 or 44-40 with the proper load and bullet in a 92 or 73 clone have the knockdown to tip the 200 yd./meter rams down? Thank you. JerryW
Top
jnyork
Advanced Levergunner
Posts: 4416
Joined: Wed Sep 12, 2007 12:33 pm
Location: Wyoming and Arizona

Post by jnyork »

Usually, but you will ring a few. With the new rule on setting the rams at the topple point, as in IHMSA, you will probably do a lot better. I shoot with a lady who is a competitor at the National Championship level in all categories of Lever Action. She shoots a .357 exclusively and does very well indeed with it.
Top
Post Reply

Return to “General Discussion”