That Browning finish is actually quite easy to take off.
Problem is, it I'd also tinted to hide the low quality wood.
I take it off anyway and go back with a satin finish
Search found 3383 matches
- Mon Aug 26, 2019 9:39 pm
- Forum: General Discussion
- Topic: Browning Hard Finish -- "White Scratch" Home Repair
- Replies: 10
- Views: 2562
- Sat Aug 24, 2019 3:11 pm
- Forum: General Discussion
- Topic: Browning experts needed
- Replies: 6
- Views: 1282
Re: Browning experts needed
About a year ago I sold a LNIB Browning B92 in 44mag It was the model without the saddle ring. I never fired it much but it was an incredibly smooth action This week I was told by a friend that he spotted a used BROWNING 1892 in 45 Colt. I am not familiar with this. I was under the impression that ...
- Wed Aug 21, 2019 1:51 am
- Forum: General Discussion
- Topic: Back in Time....with your favorite smoke-pole
- Replies: 30
- Views: 2555
- Mon Aug 19, 2019 6:39 pm
- Forum: General Discussion
- Topic: Anybody flown out of ATL w/checked?
- Replies: 7
- Views: 593
Re: Anybody flown out of ATL w/checked?
Tycer, are you talking about transiting ATL or leaving from there?
I'll be going through ATL from DFW to JNB next month with 2 checked rifles. Fingers crossed.
I'll be going through ATL from DFW to JNB next month with 2 checked rifles. Fingers crossed.
- Mon Aug 12, 2019 12:02 pm
- Forum: General Discussion
- Topic: Selling on GunBroker - any advice...?
- Replies: 7
- Views: 1171
Re: Selling on GunBroker - any advice...?
Don't put a "buy it now" price on it. Some idiot will end your auction then back out when they realize they can't have it in their jurisdiction. Then you HAVE to relist it on GB and finally sell it there to get your commission back :evil: Start it at the lowest price you will accept with b...
- Sat Aug 10, 2019 5:34 pm
- Forum: General Discussion
- Topic: Painting a Galvanized Metal Roof?
- Replies: 11
- Views: 1528
Re: Painting a Galvanized Metal Roof?
For what good quality paint or epoxy costs, you could almost put new sheet metal up. That is, provided you could do your own labor.
You might try a light acid wash on the shiney parts before painting. Don't breathe the lead fumes.
You might try a light acid wash on the shiney parts before painting. Don't breathe the lead fumes.
- Thu Aug 08, 2019 8:10 am
- Forum: General Discussion
- Topic: Strobe Flashlights...and Dogs...
- Replies: 5
- Views: 904
Re: Strobe Flashlights...and Dogs...
Thread Drift Warning: I'd love to find a flashlight that defaults to Strobe when you first turn it on....The ones I have and see online/stores you have to push the button several times to get to the Strobe Mode. I have several models of Streamlight Scorpions The 2 newer ones have strobe. You simply...
- Wed Aug 07, 2019 3:58 pm
- Forum: General Discussion
- Topic: Questions About DSL Internet
- Replies: 7
- Views: 1147
Re: Questions About DSL Internet
Yes, it's enough. Unless you like to watch HD or 4K. Then I'm not sure. I watch Netflix on the lowest resolution to save my bandwidth. I'm on satellite so I get a limited amount of 12k download. Even when I get choked down to the slower speed, Netfix still streams. I seldom watch Amazon prime becaus...
- Tue Aug 06, 2019 2:40 pm
- Forum: General Discussion
- Topic: Auction finds
- Replies: 7
- Views: 1762
Re: Auction finds
Jealous.
I'd love to find a decent .40-65 or .40-82 in an 1886
I have a Browning 1885 in .40-65
- Sat Aug 03, 2019 11:28 am
- Forum: General Discussion
- Topic: Individually packaged gun oil wipes. Reviews or Suggestions?
- Replies: 14
- Views: 1251
Re: Individually packaged gun oil wipes. Reviews or Suggestions?
I already had some Rem Oil wipes in a canister, so I ordered some Ballistol individual wipes. I sighted in a couple of rifles yesterday and used one of the wipes on both guns. Did a good job. I did this in the kitchen. And I'm still alive. :D The wife didn't notice the smell, so they passed a very i...
- Fri Aug 02, 2019 6:25 pm
- Forum: General Discussion
- Topic: do anybody want free 8mm free
- Replies: 1
- Views: 439
- Thu Aug 01, 2019 2:58 pm
- Forum: General Discussion
- Topic: Hornady 366
- Replies: 8
- Views: 1137
- Mon Jul 29, 2019 5:12 pm
- Forum: General Discussion
- Topic: Individually packaged gun oil wipes. Reviews or Suggestions?
- Replies: 14
- Views: 1251
Re: Individually packaged gun oil wipes. Reviews or Suggestions?
I have used Rem Oil wipes before and they worked well. I just didn't realize there were so many choices out there nowadays. The Rem Oil wipes I have came in a canister, so they did dry out a bit. I guess I could have borrowed off of Sixgun's idea and put some of those in a heavy ziplock bag, along w...
- Mon Jul 29, 2019 12:29 pm
- Forum: General Discussion
- Topic: Individually packaged gun oil wipes. Reviews or Suggestions?
- Replies: 14
- Views: 1251
Individually packaged gun oil wipes. Reviews or Suggestions?
I'm headed back to Africa this fall. It will probably be warmer than it has been any of the other times I have been. Packing weight is crucial, so I won't be taking a full gun cleaning kit. Volatile chemicals and all that on an airplane, anyway.... I'm planning on taking some individually wrapped gu...
- Mon Jul 29, 2019 12:16 pm
- Forum: General Discussion
- Topic: Speaking of things that sting
- Replies: 24
- Views: 1926
Re: Speaking of things that sting
Anyone ever get stung by a Cow Ant? Big ol orange and black fuzzy ant? When we were kids, we were always told to avoid the cow ants and they would sting the fire out of you. I was showing out to my brother and cousin and picked one up... one time . I picked up the cow ant and said, "See they w...
- Tue Jul 02, 2019 9:50 pm
- Forum: General Discussion
- Topic: Find the hidden levergun in this photo....
- Replies: 18
- Views: 2609
Re: Find the hidden levergun in this photo....
She is a curator at the Buffalo Bill Cody museum in Cody, Wyoming.
I follow her on FB. Apparently they are finishing up a remodel of the museum.
I haven't visited it since 2009. Need to go back.....and see the guns.....
I follow her on FB. Apparently they are finishing up a remodel of the museum.
I haven't visited it since 2009. Need to go back.....and see the guns.....
- Tue Jun 25, 2019 4:13 pm
- Forum: General Discussion
- Topic: Cool and wet start on summer
- Replies: 11
- Views: 1571
Re: Cool and wet start on summer
We have had plenty of years with much more total rainfall than we have had for the past 2. But I have never seen it spaced out so "perfectly" like this. It rains to the point of running off, then quits. Then as soon as it looks like it might dry up a bit, it rains again. It usually takes a...
- Tue Jun 18, 2019 12:27 pm
- Forum: General Discussion
- Topic: Local gun shops. And greed. grrrrrrrr......
- Replies: 48
- Views: 9853
Re: Local gun shops. And greed. grrrrrrrr......
You had them hold the guns for you until you accumulated 3 or 4? Yeah why ? Because you didn't mention where they charged you for storage. I must be special no one ever charged me for storage . You're being trolled...by an 8-post wonder. Besides, there is no need for storage fees when all 4 or 5 gu...
- Fri Jun 14, 2019 8:44 pm
- Forum: General Discussion
- Topic: Local gun shops. And greed. grrrrrrrr......
- Replies: 48
- Views: 9853
Re: Local gun shops. And greed. grrrrrrrr......
They sell me quality NEW rifles and pistols at prices below list price. Maybe 4 new pistols and 3 new rifles in the last three years. I do fill out the same old form every time, but that takes only a few minutes per gun. They never mention a transfer fee. Is that normal? Yes, it's normal. They are ...
- Fri Jun 07, 2019 8:44 pm
- Forum: General Discussion
- Topic: 45-70 lever ammo feeding advice needed
- Replies: 7
- Views: 1300
Re: 45-70 lever ammo feeding advice needed
Thanks to all who responded and gave advice. I usually do hunt with different ammo than the Hornaday, and all other ammo i have tried has fed fine. I can use the Hornaday in my Ruger #3 But if I wanted to change the magazine follower, where do I get the new style and how hard is it to change out? Y...
- Fri Jun 07, 2019 2:46 am
- Forum: General Discussion
- Topic: 45-70 lever ammo feeding advice needed
- Replies: 7
- Views: 1300
Re: 45-70 lever ammo feeding advice needed
Change your magazine follower. It's cheap and will most likely fix your problem .
325 gr FTX bullets feed just fine through my Guide Gun
325 gr FTX bullets feed just fine through my Guide Gun
- Wed Jun 05, 2019 11:01 am
- Forum: General Discussion
- Topic: I just saw that the 1895 is back.
- Replies: 37
- Views: 5804
- Mon Jun 03, 2019 10:18 pm
- Forum: General Discussion
- Topic: Texas outlaws Red Light Cameras.
- Replies: 20
- Views: 1753
Re: Texas outlaws Red Light Cameras.
The timer already exists. It called a yellow light, which simply means that the light is about to turn red. As long as the light is not red, it is legal to cross the white stop bar. Once you are across it, you control the intersection until you clear it. You have the right to confront your accuser. ...
- Mon Jun 03, 2019 6:33 pm
- Forum: General Discussion
- Topic: Bullet mold
- Replies: 11
- Views: 1923
Re: Bullet mold
Don't waste you time buying a .375 bullet mould.
You will need a .377 or larger.
Try a Lyman 378364 or 380681
You will need a .377 or larger.
Try a Lyman 378364 or 380681
- Sun Jun 02, 2019 12:10 am
- Forum: General Discussion
- Topic: "Decoration Day" question
- Replies: 28
- Views: 2075
Re: "Decoration Day" question
The Irish slaves were treated much worse than the black slaves here in the U.S., particularly in the Northern States. Read your history. I can read just fine. The Irish, while treated very badly, were not owned and not slaves. Indentured servants were abused very badly, tho. Read your history. Comp...
- Sat Jun 01, 2019 4:08 pm
- Forum: General Discussion
- Topic: "Decoration Day" question
- Replies: 28
- Views: 2075
Re: "Decoration Day" question
And no..if the US constitution or its properly ratified amendments don't give a certain power to the Federal Government, it is reserved by the States. Ok....And, I agree. But: The Constitution begins by saying that all men are created equal, and are endowed with certain steadfast rights, and I don'...
- Sat Jun 01, 2019 7:14 am
- Forum: General Discussion
- Topic: Another AR 10 in 260 Rem.
- Replies: 6
- Views: 916
Re: Another AR 10 in 260 Rem.
I don't like the 6-position stocks at all.
I replaced the entire lower on my Grendel with a Rock River, A2 stock, ambi-safety, winter trigger guard.
It's a great hog and coyote gun with my predator light mounted.
I replaced the entire lower on my Grendel with a Rock River, A2 stock, ambi-safety, winter trigger guard.
It's a great hog and coyote gun with my predator light mounted.
- Thu May 30, 2019 9:49 am
- Forum: General Discussion
- Topic: "Decoration Day" question
- Replies: 28
- Views: 2075
Re: "Decoration Day" question
One of the earliest Decoration Days was in the South, but it was freed slaves honoring the graves of the Union Soldiers that freed them. Slavery was dispicable, and if it took Federal Overreach to stop it then that's just fine with me. https://www.history.com/news/memorial-day-civil-war-slavery-cha...
- Mon May 27, 2019 12:54 pm
- Forum: General Discussion
- Topic: "Decoration Day" question
- Replies: 28
- Views: 2075
Re: "Decoration Day" question
One of the earliest Decoration Days was in the South, but it was freed slaves honoring the graves of the Union Soldiers that freed them. Slavery was dispicable, and if it took Federal Overreach to stop it then that's just fine with me. https://www.history.com/news/memorial-day-civil-war-slavery-cha...
- Mon May 27, 2019 11:03 am
- Forum: General Discussion
- Topic: "Decoration Day" question
- Replies: 28
- Views: 2075
Re: "Decoration Day" question
Confederates were true Patriots, fighting to stop the overreach of Federal authority. The Grand Army of the Republic were Patriots, fighting to stop the dissolution of the USA. I have ancestors that fought on both sides. While both armies were victims of political spin doctors, they deserve to be ho...
- Tue May 14, 2019 7:58 am
- Forum: General Discussion
- Topic: Browning Model 71
- Replies: 9
- Views: 1618
Re: Browning Model 71
One of my Browning 71s had a bent firing pin. It would fire if the lever was cycled, but if I ever let the hammer down, then cocked to to fire, it would not. Can you take pencil or punch and lightly push on the back of the fire pin and make it protrude through the face of the bolt? Or do you feel re...
- Mon May 13, 2019 8:45 pm
- Forum: General Discussion
- Topic: Jaquas Gunshop........
- Replies: 6
- Views: 1083
Re: Jaquas Gunshop........
I stopped in there last September and bought a "parts gun" they had listed as a wallhanger. An old American side by side in 12 gauge.
Its solid enough I'm going to shoot some BP loads out of it.
Its solid enough I'm going to shoot some BP loads out of it.
- Sun May 12, 2019 4:55 pm
- Forum: General Discussion
- Topic: Bipod use....
- Replies: 11
- Views: 880
Re: Bipod use....
Sandbags are typically placed under the action, where a bipod is out on the fore end. Harmonics and balance point will change your POI. If there is any flex in the fore stock a bipod will alter your POI, especially if any part of the stock touches the barrel I have 4 different sets of 2-piece shooti...
- Sun May 12, 2019 10:14 am
- Forum: General Discussion
- Topic: Handgun rests for load workups
- Replies: 19
- Views: 1464
Re: Handgun rests for load workups
I got one of those in the magnum version for regulating my double rifles. Once I figured out where to adjust everything it works great.
- Sat May 11, 2019 10:26 pm
- Forum: General Discussion
- Topic: Handgun rests for load workups
- Replies: 19
- Views: 1464
Re: Handgun rests for load workups
I bought a MTM “K Zone” rest not for handguns but for shooting AR’s with larger then ten round mags . While assembling I noticed they recommended it for handguns by removing the rear rest portion . I’ve used it with several 44 Mags and a 1911 10mm and found it very comfortable 8) https://www.amazon...
- Sat May 11, 2019 7:57 am
- Forum: General Discussion
- Topic: Handgun rests for load workups
- Replies: 19
- Views: 1464
Re: Handgun rests for load workups
I bought a MTM “K Zone” rest not for handguns but for shooting AR’s with larger then ten round mags . While assembling I noticed they recommended it for handguns by removing the rear rest portion . I’ve used it with several 44 Mags and a 1911 10mm and found it very comfortable 8) https://www.amazon...
- Thu May 09, 2019 8:32 pm
- Forum: General Discussion
- Topic: Newbie bullet casting help please! RForte61
- Replies: 13
- Views: 1440
Re: Newbie bullet casting help please! RForte61
Buy a Lyman Cast Bullet handbook and read it.
Then buy a mould and get after it.
Then read the handbook again.
Then buy a mould and get after it.
Then read the handbook again.
- Tue May 07, 2019 7:03 pm
- Forum: General Discussion
- Topic: talk me into/outta a bighorn 500S&W
- Replies: 21
- Views: 1850
Re: talk me into/outta a bighorn 500S&W
I say if you want one, buy it.
But for the price you could get 2 others, maybe 3, in .444, 45-70 and/or .44 mag.
But for the price you could get 2 others, maybe 3, in .444, 45-70 and/or .44 mag.
- Sat May 04, 2019 9:44 am
- Forum: General Discussion
- Topic: Black Powder Question...OK 2 Questions.
- Replies: 20
- Views: 3135
Re: Black Powder Question...OK 2 Questions.
Contact someone in the Forsyth Gun Club.
They may have a local source.
But unless you get in on a bulk buy, it may be cheaper to mail order than drive to Miles City or farther.
Graf's has good sales from time to time.
They may have a local source.
But unless you get in on a bulk buy, it may be cheaper to mail order than drive to Miles City or farther.
Graf's has good sales from time to time.
- Tue Apr 23, 2019 7:44 am
- Forum: General Discussion
- Topic: This is for sale.....
- Replies: 14
- Views: 2090
Re: This is for sale.....
The instant I read an auction that says the items is for sale elsewhere....I'm out. Make up your mind.
- Sat Apr 20, 2019 1:44 pm
- Forum: General Discussion
- Topic: This is for sale.....
- Replies: 14
- Views: 2090
Re: This is for sale.....
Sellers with no ratings tend to have high prices
- Thu Apr 18, 2019 2:14 am
- Forum: General Discussion
- Topic: 500 S&W in lever guns
- Replies: 27
- Views: 4550
Re: 500 S&W in lever guns
Complaining that a pistol round doesn't make much more power than rifle cartridges is like complaining you dont make 200k a year when you work at McDonald's.
Its entirely relevant. It's just not the way you wanted the thread to drift .
Its entirely relevant. It's just not the way you wanted the thread to drift .
- Tue Apr 16, 2019 1:54 pm
- Forum: General Discussion
- Topic: 500 S&W in lever guns
- Replies: 27
- Views: 4550
Re: 500 S&W in lever guns
20" Barrel, 325 Swift A Frame gives MV of 2,189 and ME of 3,458 ftlbs. Is that a mild, standard or hot load for the .500 S&W? Honestly it doesn't sound that impressive if that is out of a rifle. The old .405 Winchester will push a 300 grain bullet at 2200fps out of a 22 inch barrel with le...
- Sun Apr 14, 2019 11:09 pm
- Forum: General Discussion
- Topic: 357 factory loads
- Replies: 10
- Views: 1627
Re: 357 factory loads
Never had any problems with brand name factory .357 ammo in M19 or M1892 . Or with my hand loads for that matter. Never seen any Eagle ammo though and do not even know who makes that. Does "Eagle ammunition" mean Aguila or American Eagle? I don't use either for anything other than target ...
- Tue Mar 26, 2019 3:35 am
- Forum: General Discussion
- Topic: Making Hard-boiled Eggs Palatable
- Replies: 42
- Views: 4464
- Sun Mar 24, 2019 3:20 pm
- Forum: General Discussion
- Topic: ballistic`s of shooting a rifle when on the moon.
- Replies: 41
- Views: 3364
- Sun Mar 24, 2019 11:46 am
- Forum: General Discussion
- Topic: ballistic`s of shooting a rifle when on the moon.
- Replies: 41
- Views: 3364
Re: ballistic`s of shooting a rifle when on the moon.
Yer making my blood boil. ..
- Sat Mar 23, 2019 10:45 pm
- Forum: General Discussion
- Topic: ballistic`s of shooting a rifle when on the moon.
- Replies: 41
- Views: 3364
- Sat Mar 23, 2019 10:42 am
- Forum: General Discussion
- Topic: ballistic`s of shooting a rifle when on the moon.
- Replies: 41
- Views: 3364
Re: ballistic`s of shooting a rifle when on the moon.
With virtually no atmo to speak of bullet velocities should be higher and allow easier escape velocity . I guess your gun might need an oxygen tank to achieve optimum ignition. With a perfect burn, you might melt your barrel. Ought to get a bazillion parsecs per eon. Don't talk about squirrel hunti...
- Fri Mar 22, 2019 11:21 pm
- Forum: General Discussion
- Topic: Making Hard-boiled Eggs Palatable
- Replies: 42
- Views: 4464
Re: Making Hard-boiled Eggs Palatable
Throw them away and get a Reese's peanut butter egg