Paco Kelly's Leverguns.com

Griff

Don't give up hope, Marlin chambered the 1894 in 41 Rem Mag with Micro-Groove rifling in both stainless (1894S) and blued (1894FG) as well as 6 groove Ballard rifling (1894CCL). Not every S or CCL was a 41 Mag, as both of those were chambered for other cartridges. They are out there.

Griff

Merry Christmas, enjoy the warmth of Florida... I'm up here in Michigan, but will be headed for Las Vegas tomorrow! There might be some weather (other than good) between here and there, but... not something I've not experienced before.

Griff

Thank you and Merry Christmas to you & yours also.

Griff

.38 Spl &.357 Magnum are two divergent length cartridges, in order to make both work in the same action, some parameters must be compromised. Most notably the position and shape of the slots in the cartridge guides, This compromise has been the source of many complaints about the inability of th...

Griff

Having been bounced off the back of a fractious equine with a holstered sidearm, 35 lbs of force against the hammer wouldn't be difficult to attain... While both my horses used in mounted work were effectively "bomb-proof", both upon occasion would "act out"... Only once out in p...

Griff

I like the .357 combo ... use it more than others ... though to be honest, it hasn't been near enough this past year. IMG_3181.JPG Up until the boating accident, I had a couple of the Rossi carbines to mate up with the .357 Colt SAAs, but I was quite partial to my .45 Colt SAAs & the Winchester...

Griff

Scott Tschirhart wrote: ↑Sat Dec 23, 2023 8:07 pm
AJMD429 wrote: ↑Sat Dec 23, 2023 4:47 pmOver the years I got really tired of having to 'baby' my pretty walnut-and-blued-steel leverguns
I must confess that I never get tired of wiping down a levergun.

Heck, I've been known to get them outta the safe just wipe them down!

Griff

I'm sure it's just coincidence that the majority of scammers are from right next door to some US corporation's call center. Or, maybe it just the same address for those downtrodden workers to put in a little "overtime" making some afterhours calls.

Griff

Water?

Griff

After getting out of the Navy and shoeing horses while going to college, I carried a Winchester mdl 94 carbine in the back window of my p/u truck, never had a problem... Even when I did get pulled over, mostly because my coal forge wasn't totally out, or the shoes rattling against each other in the ...

Griff

Very nice Jim. Ruger builds a quality 1911 and that example is nicely embellished.

Griff

Very nice. Simple but elegant!

Griff

I learned my 1911 manual of arms in the Navy... we were taught to carry in condition four, full magazines in pouch, hammer down on empty chamber. On board ship, stood many a quarterdeck watch that way, both stateside and overseas. Gearing up for a mission, it changed to condition one. When I bought ...

Griff

Color me scared! But, it may become necessary the pessimist in me sez! Nearly all my favorite cartridges are originally BP rounds... I have loved the .30-30 the longest, but the .32-40 is rapidly gaining ground! people been making it for millennia and rarely do they blow themselves up ... put your ...

Griff

Color me scared! But, it may become necessary the pessimist in me sez! Nearly all my favorite cartridges are originally BP rounds... I have loved the .30-30 the longest, but the .32-40 is rapidly gaining ground!

Griff

Rivals that Mossberg 464SPX for sure.

Griff

RIP to a warrior that's earned the right to rest.

Griff

I just tried my favorite cartridge, the .30-30 Winchester... and a 150 grain bullet, nothing else, and it listed 28 loads using 3 different bullets... but nothing for a cast bullet. I seem to recall the old version did pop up cast load data.

Griff

Humor in its purest form!

Griff

The danger sign is if someone with Italian six shooters starts buying Italian motorcycles, then Italian cars, and then finally Italian shoes ! ! ! That could be an international financial crisis. :!: . :lol: No danger of that here Brother. They don’t make Italian shoes that fit me! Do Luccheses cou...

Griff

Bill in Oregon wrote: ↑Wed Dec 13, 2023 8:48 am Omigosh, she is adorable. Whoops. Sorry doc, off message ...

+1

Griff

I like the look of their '73 Winchester takedown...

Griff

I worked construction when I first got out of the Navy and going to college. Built/remodeled 3 custom homes for the same contractor. Two included demo work while the 3rd was new from the ground up. Some site prep work, mostly framing, but some finish work... I found framing fit me, finish work, not ...

Griff

I sent them an email... said their "new, improved" site... ISN'T. Doesn't include any 45 Colt rifle data.

Griff

I've had guns shipped via UPS, FedEX & USPS, but the only time I've shipped guns, I used DHL back when they were still operating in CONUS. So... take your best guess.

Griff

I have 2 3rd Gen Colt SAAs in 45 Colt. My preferred SD load is a Speer 200 HP (flying ashtray), pushed by 6.5 grains of TiteGroup for about 850fps from the 4-3/4" bbl. Only ever used on paper targets during qualifying, but expansion in wet phonebooks @ 50 feet was impressive.

Griff

Good conversation! My favorite Johnny Cash tune is about his 51, 52, 53... etc Cadillac! I built a VW bug that fit that description! Even had a couple Porsche parts thrown... but mine weren't pilfered from a factory, but haggled out of various junkyards!

Griff

My takeaway is that, yep... it's all fun & games until someone gets hurt. Pushing the envelope sometimes has dire consequences. Military grade weapons are not necessarily safe... as by gov't fiat, they're built by the low bidder!

Griff

Sitting in Minneapolis, watching the snow come down, and my $3/gal fuel go up, after paying $20 for a skinny parking space... I wish I could buy the boat! I would be someplace warm, paying more than $20 for a skinny parking space, watching $6/gal fuel go up to keep the a/c on! But, I'd be someplace ...

Griff

No... I'm quite content with my sole Marlin, a 375. You are not floundering around with anything else? Cod you really be happy with only one? Nope, not floundering around... I have Winchester 94s to fill the roles I wish for them. Edited to add: I err'd... I forgot I have a 1894 Marlin converted to...

Griff

No... I'm quite content with my sole Marlin, a 375.

Griff

One of the first admonishments I received when shooting my Sharps was to make sure I pulled the hammer back to at least half cock before opening the breech. Not doing so was the most common cause of breaking the firing pin. A simple step, but one easily overlooked.

Griff

I've had my Shiloh Sharps since 1987 and have only taken it apart once to clean out the breech block after firing many thousands of BP rounds... that has to be at least 10 or so years ago. It wasn't really to fix a problem... just thought it might be nice to do. Glad to hear you've got yours sorted ...

Griff

Griff wrote: ↑Thu Nov 30, 2023 2:35 pmAny comments I might make would be cause for censure!

Griff

Scott Tschirhart wrote: ↑Thu Nov 30, 2023 7:56 amWhen you think about how the government extracts resources from us, why should it treat us any better than a milk cow?

If a milk cow, I'd expect BETTER treatment!

Griff

Any comments I might make would be cause for censure!

Griff

GunnyMack wrote: ↑Wed Nov 29, 2023 7:48 pmYa can't beat that! Dillon is the best at customer service hands down. If only other companies would take a page from Dillon's play book the world would be a better place.

Not to be political about it... but if only our Gubmint reacted in its' citizens best interests like that!

Griff

Good shooting. I'd have liked to be at the range today, but I've been waiting all day for a couple of parts to fix my truck so I'll be ready to head off to work... gotta catch up on bills...

Griff

Drawdown wrote: ↑Wed Nov 29, 2023 5:48 pmI know, I always get you'll name mixed up. I edited it. I type too fast, make Lotta mustakes

It's all good!

Griff

Grizz, I'm with you on the 30-30 I love it too, everything about it! For hunting these mountains I honestly see it like Baby Bears Soup? "It's Just Right"! When you add up everything, packing, handling, accuracy of a rifle with iron sights, in which the cartridges range and iron sight ran...

Griff

I bought my first one in early 1986 in .357 and proceeded to slick it up as per the instructions I had been given at my local cowboy action shoot. "Fill the snot out of it with 'machine type lapping compound' and work the action several hundred times". Along with the admonishment to NOT us...

Griff

Using the NRA's "A Place to Shoot" website, I found this place: Morr Indoor Range.

Griff

While I've loaded for the .44Magnum a few days before loading some .30-30s for my mdl 64A, I no longer have a 44 Mangl'em... so I count the .30-30 as my longest running cartridge I've loaded for... Since 1973. In that time, I've loaded a few of the 170s, but found that in my particular rifle the 150...

Griff

The rebirth of this thread has me itching to get back out to the range and fire some rounds out of my mdl 94, striving for a better outing than my last one. As I was reading it from the beginning, not bothering to look at the date of the OP, I was thinking of my answer... and SURPRISE! There it was,...

Griff

JimT wrote: ↑Tue Nov 28, 2023 10:37 pmI could not make that out in the photo on my computer ... but at least we had some interesting conversation.

Mostly good also!

Griff

My Grandmother was born in 1874 and passed in July 1969 just days after Neil Armstrong walked on the Moon. She talked of her family life in East Tennessee, the coming of cars, telephone, radio and TV. She was my Grandfather's second wife, mother to the 3 youngest of his 9 kids. Talked of farm life b...

Griff

I used to shoot some conicals out of my .36 caliber ASM 1851. I cast them out of a combination mold I got thru Dixie Gun Works. They weighed around 90 grain of pure PB. I used the same ~15 grains of 3F I used for RBs and a Wonder Wad. I got them to take down knock down targets in CAS. As more clubs ...

Griff

I gotta agree with TedH. It's been quite a few years since I've shot my 375 Marlin, but... It was capable of much better accuracy than I can produce. I replaced the 1970s era Weaver 4X with a 2019 Bushnell 1-4X and on 2 power was getting 1-¼" - 1-½" groups with the last of my Hornady 220gr...

Griff

2thumbsup.jpg

Griff

I callled Dillon and they gave me a return number and instructions to send the press back. They told me that the lifetime warranty means lifetime and it doesn’t matter that I bought the press in the 1980s. They will take it completely apart and give it a chemical bath, but it all back together with...

Search found 20624 matches