Search found 101 matches

by grahng
Sat Jul 04, 2015 4:22 pm
Forum: General Discussion
Topic: Uberti 1873 lover gun front site question
Replies: 6
Views: 1462

Re: Uberti 1873 lover gun front site question

Shooting really high. I'm on paper at 25 yrs, but no where to be found at 50.
With the peep, I can see the front site just fine. Yes, its zeroed with the peep at 50. No problems.
The rear site is in the peep when it is up.
Thanks for the reply
by grahng
Sat Jul 04, 2015 2:24 pm
Forum: General Discussion
Topic: Uberti 1873 lover gun front site question
Replies: 6
Views: 1462

Uberti 1873 lover gun front site question

I recently added a Marbles Tang peep site to my Uberti. Shoots great. I needed to remove the back iron site as it was in my peep hole site picture and bugged me. I bought a Marbles rear foldable site with the adjustable elevation to replace the stock one. Now, when using the rear foldable site I can...
by grahng
Tue Feb 24, 2015 8:46 pm
Forum: General Discussion
Topic: Need Gunsmith in Daytona Beach Area
Replies: 6
Views: 635

Re: Need Gunsmith in Daytona Beach Area

Hey Rihmfire,
Long time no talk. How have you been?
I don't get out to that club much. Would you happen to know names? Are they on here or Florida Shooters network?
Thanks,
Jerry
by grahng
Mon Feb 23, 2015 9:39 am
Forum: General Discussion
Topic: Need Gunsmith in Daytona Beach Area
Replies: 6
Views: 635

Re: Need Gunsmith in Daytona Beach Area

Did you go to Seabreeze? When did you graduate?
We use to go hunting lizards with our BB gun.
I'll take Montana over FL any day.
by grahng
Sun Feb 22, 2015 11:44 am
Forum: General Discussion
Topic: Need Gunsmith in Daytona Beach Area
Replies: 6
Views: 635

Need Gunsmith in Daytona Beach Area

I have a Uberti 1873 Lever I want to have a Marbles Tang sight installed on and a trigger job done.
Does anyone know of a GOOD gunsmith in the Daytona Beach Florida area?
Thanks,
Jerry
by grahng
Wed Dec 19, 2012 4:32 pm
Forum: General Discussion
Topic: Attn: Michael S of Wisconsin
Replies: 0
Views: 759

Attn: Michael S of Wisconsin

If you purchased a Bushnell Spotting Scope from me a few months ago. Please PM me. You need something I have.
Thanks :)
by grahng
Sun Sep 25, 2011 11:09 am
Forum: General Discussion
Topic: What color for front sight?
Replies: 20
Views: 2730

Re: What color for front sight?

You know what you guys, this site is just totaly awesome. I posted this same question on numerous other forums and received negligible response. Just goes to show you who loves shooten'.........Levergunners!!!! Wahwho!!!!!!
Thanks for all the response.
Jerry :D
by grahng
Sat Sep 24, 2011 8:20 pm
Forum: General Discussion
Topic: What color for front sight?
Replies: 20
Views: 2730

Re: What color for front sight?

Ya know. I totally forgot about white. That may be the ticket. Two black in the back, white on the front.
Thanks guys.
by grahng
Sat Sep 24, 2011 7:13 pm
Forum: General Discussion
Topic: What color for front sight?
Replies: 20
Views: 2730

What color for front sight?

I have a couple of firearms where the sights are black and thought I'd just get some Testors to make them more visible. I know I can use HiViz sights but thought I'd give this a shot(no pun intended) first. Does anyone have any experience as the color that gives the best visibilty under most conditi...
by grahng
Sun Aug 14, 2011 12:20 pm
Forum: General Discussion
Topic: Beretta M9A1 andf Bianchi Holster Question
Replies: 2
Views: 1320

Beretta M9A1 andf Bianchi Holster Question

Does anyone know if the Bianchi UM84 and the Bianchi 92 holsters will fit the Beretta M9A1? As I am sure you know, the the M9A1 has a rail, unlike the 92FS. So, I was not sure if the M9A1 would fit these holsters. It is not listed on the Bianchi website and the representive at Bianchi could not tell...
by grahng
Fri Jul 22, 2011 3:46 pm
Forum: General Discussion
Topic: Carbon/powder buildup in the barrel question????
Replies: 9
Views: 1547

Re: Carbon/powder buildup in the barrel question????

Thanks. I have a stupid question for you. How do you spot the copper down the barre. In other words, yeah you get a light and take a look, but what does it look like?
Thanks again
by grahng
Fri Jul 22, 2011 2:35 pm
Forum: General Discussion
Topic: Carbon/powder buildup in the barrel question????
Replies: 9
Views: 1547

Carbon/powder buildup in the barrel question????

If you do not get all the carbon/powder cleaned out of the barrel, that is, the amount you cannot see, will this adversely affect the barrel over time?
Thanks
by grahng
Tue Jul 19, 2011 6:13 pm
Forum: General Discussion
Topic: Cleaners and lubricants question?
Replies: 13
Views: 2215

Re: Cleaners and lubricants question?

Not sure how WD 40 got in the mix. My original post included Ballistol. thoughts please :)
Also, how about the carcinogenic effects to humans. I usually latex gloves when messing with all the cleaners.
Oh, and how about negative effects on synthetic stock, rubber type grips such as Hogue?
by grahng
Tue Jul 19, 2011 2:37 pm
Forum: General Discussion
Topic: Cleaners and lubricants question?
Replies: 13
Views: 2215

Re: Cleaners and lubricants question?

Would you say that all three clean equally?
by grahng
Mon Jul 18, 2011 4:49 pm
Forum: General Discussion
Topic: Cleaners and lubricants question?
Replies: 13
Views: 2215

Re: Cleaners and lubricants question?

You're right on the spelling Terry. :)
by grahng
Mon Jul 18, 2011 3:51 pm
Forum: General Discussion
Topic: Cleaners and lubricants question?
Replies: 13
Views: 2215

Cleaners and lubricants question?

I understand that Ballistol will not harm wood stocks or synthetic materials on firearms. Can the same be said about CLP and or Remoil?
Thanks
by grahng
Mon Dec 27, 2010 12:26 pm
Forum: General Discussion
Topic: Cleaing brush size for AK 7.62x39
Replies: 9
Views: 1630

Re: Cleaing brush size for AK 7.62x39

Thank you..........Have a great New Years!
by grahng
Mon Dec 27, 2010 11:47 am
Forum: General Discussion
Topic: Cleaing brush size for AK 7.62x39
Replies: 9
Views: 1630

Cleaing brush size for AK 7.62x39

I choose not to remain ignorant or have a dirty barrel, so what size cleaning jags and brushes do I need for my new AF 47?

Thanks and hope everyone had a really great Christmas!

Jerry
by grahng
Sat Jun 19, 2010 12:44 pm
Forum: General Discussion
Topic: Red Dot Scope needed for AR.
Replies: 13
Views: 2041

Re: Red Dot Scope needed for AR.

How well do the Truglo and Osprey hold up?
I know Truglo has a life time warrant. Not sure about Osprey. Actually never heard of Osprey but means abolutely nothing LOL
by grahng
Fri Jun 18, 2010 6:20 pm
Forum: General Discussion
Topic: Red Dot Scope needed for AR.
Replies: 13
Views: 2041

Red Dot Scope needed for AR.

Need some suggestions for a nice red dot for my flattop top AR that has iron sights on it. I have about $200 to invest. Can I have some sugestions please. Will be shooting at the range mostly, 50-100 yds.
Thanks,
Jerry
by grahng
Wed Apr 21, 2010 7:14 am
Forum: General Discussion
Topic: Adjusting dovetail slot filler to fit
Replies: 11
Views: 1727

Re: Adjusting dovetail slot filler to fit

Hey thanks guys for all the info. I took a little off the bottom and she went it like she should. Tight but not to tight.
Thanks again!
by grahng
Tue Apr 20, 2010 11:31 am
Forum: General Discussion
Topic: Adjusting dovetail slot filler to fit
Replies: 11
Views: 1727

Adjusting dovetail slot filler to fit

I want to put a filler in my dovetail. I have the correct size for the rifle but its very very snug. It satrts fine but then after about 3/16's, it won't budge any more. What is the proper way to adjust the filler to fit?
by grahng
Sat Apr 17, 2010 7:10 pm
Forum: General Discussion
Topic: Rossi 92 sights??
Replies: 23
Views: 16607

Re: Rossi 92 sights??

I can see!!!!!!!!!! Put a tang sight on my Rossi and darned if I can't see the front sight again. Can't wait to get to the range. Thank you all for the recommendation. I have to say it was an easy install for the Rossi. I have a 73 model ordered and for sure will be putting one on it as well. Can so...
by grahng
Sat Apr 17, 2010 6:56 pm
Forum: General Discussion
Topic: Screw Driver bit Set?
Replies: 3
Views: 500

Re: Screw Driver bit Set?

Thanks guys. I most certainly agree about you get what you pay for. I was looking at the Brownells and liked what Isaw. Just needed to hear it from the pros.
by grahng
Sat Apr 17, 2010 6:38 pm
Forum: General Discussion
Topic: Screw Driver bit Set?
Replies: 3
Views: 500

Screw Driver bit Set?

I need to get a decent set of bits to be able to work on my firearms without messing up the screw heads. Who makes a nice set that is affordable?
Thanks, Jerry
by grahng
Wed Mar 24, 2010 9:07 pm
Forum: General Discussion
Topic: Rossi 92 sights??
Replies: 23
Views: 16607

Re: Rossi 92 sights??

As the Marbles bullseye has a 3/8" base, will that fit the Rossi Octagon barrel?
by grahng
Wed Mar 24, 2010 6:28 pm
Forum: General Discussion
Topic: Rossi 92 sights??
Replies: 23
Views: 16607

Rossi 92 sights??

Had my new Rossi at the range today shooting at 50 yds. The best I could do to get a group on the paper was to shoot 5-6 inches south of center. Grouped fine at center by doing this. Do I just need to dump the stock sight?
by grahng
Sun Mar 14, 2010 10:16 am
Forum: General Discussion
Topic: Removal of Rossi 92 rear sight
Replies: 4
Views: 4383

Re: Removal of Rossi 92 rear sight

Like most things in life, if you are going in the right direction, its much easier. Thanks guys
by grahng
Sat Mar 13, 2010 8:48 pm
Forum: General Discussion
Topic: Removal of Rossi 92 rear sight
Replies: 4
Views: 4383

Re: Removal of Rossi 92 rear sight

Thanks Terry
by grahng
Sat Mar 13, 2010 8:10 pm
Forum: General Discussion
Topic: Removal of Rossi 92 rear sight
Replies: 4
Views: 4383

Removal of Rossi 92 rear sight

I'm replacing the sight the rifle came with and seem to be having a little trouble removing the factory sight. I've tapped on it with a small brass rod and small hammer but it doesn't budge. Does it make a difference which direction to remove it? don't want to screw this thing up.
thanks
by grahng
Fri Mar 12, 2010 1:05 pm
Forum: General Discussion
Topic: Lightning Rifles
Replies: 8
Views: 1101

Re: Lightning Rifles

I'm sorry...either the Uberti or Pedersoli Lightning reproductions.
by grahng
Fri Mar 12, 2010 12:03 pm
Forum: General Discussion
Topic: Lightning Rifles
Replies: 8
Views: 1101

Lightning Rifles

I kinda like these. Anyone have an experience with them.
by grahng
Thu Mar 11, 2010 1:19 pm
Forum: General Discussion
Topic: Taylors/Uberti 1873 revolver firing pin loose
Replies: 3
Views: 804

Re: Taylors/Uberti 1873 revolver firing pin loose

Ya know Buck....I kinda had thought something like that in the back of my mind. Thanks for confirming.
by grahng
Thu Mar 11, 2010 1:17 pm
Forum: General Discussion
Topic: Florida Levergunners @ the Manatee Range PICS ON PAGE 3
Replies: 73
Views: 5107

Re: Florida Levergunners @ the Manatee Range PICS ON PAGE 3

Boy, those pictures are awesome. I'm use to Stricklands. How bout a quarterly get together???????
Sure sorry I missed this one.
by grahng
Thu Mar 11, 2010 1:08 pm
Forum: General Discussion
Topic: Taylors/Uberti 1873 revolver firing pin loose
Replies: 3
Views: 804

Taylors/Uberti 1873 revolver firing pin loose

Just got my new revolver and took it to the range yesterday. Shot like a dream. When I got it home to clean, I noticed the firing pin jiggles a little. Is that normal?????? I see there is a little hole on the backside of the hammer. Problably where it can be adjusted or removed, right? What tool is ...
by grahng
Tue Feb 16, 2010 8:03 pm
Forum: General Discussion
Topic: Florida Levergunners @ the Manatee Range PICS ON PAGE 3
Replies: 73
Views: 5107

Re: Florida Levergunners MEET THIS Fri, Feb 19th, Manatee Range

Hello guys,
My mom passed away this morning. I'm sorry, but will have to wait til the next gathering.
Thats is for now. Have a safe and fun shoot.
Jerry
by grahng
Mon Feb 15, 2010 8:44 pm
Forum: General Discussion
Topic: 357 Mag - 38 Special +p - 38 Special ???
Replies: 5
Views: 810

357 Mag - 38 Special +p - 38 Special ???

Can it be said that the ranking of pressures would be:
1st 357 mag
2nd 38 Special +P
3rd 38 Special

Assuming that to be the case, can you use numbers 2 and 3 in a 357 Mag designated firearms?
by grahng
Mon Feb 08, 2010 8:31 am
Forum: General Discussion
Topic: USFA 12 shot .22 revolver
Replies: 5
Views: 1371

USFA 12 shot .22 revolver

What can you guys tell me about USFA products?
Does anyone have one of these 12 round revolvers?

http://www.usfirearms.com/cat/12-22.asp
by grahng
Sat Feb 06, 2010 2:32 pm
Forum: General Discussion
Topic: Photo Engraved finish on Uberti Revolvers
Replies: 11
Views: 1979

Re: Photo Engraved finish on Uberti Revolvers

Hey Buck,
Does it look like it will hold up OK? Like is it actually engraved inot the metal? Whats the white finish?
by grahng
Fri Feb 05, 2010 10:08 pm
Forum: General Discussion
Topic: Photo Engraved finish on Uberti Revolvers
Replies: 11
Views: 1979

Photo Engraved finish on Uberti Revolvers

Anyone out there have one of these revolvers? How does that finish look and seem to hold up?
Looks pretty cool.
by grahng
Fri Feb 05, 2010 7:46 am
Forum: General Discussion
Topic: 1875 Uberti Outlaw
Replies: 9
Views: 1757

1875 Uberti Outlaw

Ahhhh, another question from the question man to all the Heros and Villians out there in Levergun land. Does the long triangular piece under the barrel serve any other purpose than increased support for this revolver? I have not had a chance to handle this revolver to check it out for myself. Hence,...
by grahng
Thu Jan 28, 2010 7:39 am
Forum: General Discussion
Topic: Uberti and Taylors 1873 Revolver?
Replies: 10
Views: 1079

Re: Uberti and Taylors 1873 Revolver?

Steve, Thanks for your straight out answer. I suppose if I had unlimited funds, I could go out and buy buy buy. I come here to this forum for help and it seems that you are one of the best to get answers from. I appreciate that. I love shooting and will no doubt learn much of this hobbie from many w...
by grahng
Wed Jan 27, 2010 4:27 pm
Forum: General Discussion
Topic: Uberti and Taylors 1873 Revolver?
Replies: 10
Views: 1079

Re: Uberti and Taylors 1873 Revolver?

Great Articulation Joe. I appreciated the explanation with your thoughts....very nice.
Terry maybe be right....I aggree.....but as I have never been this way before on multiple expensive items, guns, he problably cold learn some communication skills from you.
I really do appreciate it Joe. :)
by grahng
Wed Jan 27, 2010 1:47 pm
Forum: General Discussion
Topic: Uberti and Taylors 1873 Revolver?
Replies: 10
Views: 1079

Re: Uberti and Taylors 1873 Revolver?

Hey Terry, you got some kind of hormonal thing going on today? How does a guy learn unless he asks?
by grahng
Wed Jan 27, 2010 12:38 pm
Forum: General Discussion
Topic: Uberti and Taylors 1873 Revolver?
Replies: 10
Views: 1079

Uberti and Taylors 1873 Revolver?

With the premise that Taylors guns are made by Uberti, why would the Taylors 1873 Outfitter revolver, Stainless model (4505) be over $100 less than the Uberti 1873 Cattleman revolver, stainless model (345029) It seems like they should be much the same price, within a few dollars of each other. I am ...
by grahng
Sun Jan 24, 2010 5:02 pm
Forum: General Discussion
Topic: Uberti handgun question?
Replies: 16
Views: 1795

Re: Uberti handgun question?

Thanks for the input Steve. :)
by grahng
Sun Jan 24, 2010 11:00 am
Forum: General Discussion
Topic: Uberti handgun question?
Replies: 16
Views: 1795

Re: Uberti handgun question?

OK guys, lets take this one question at a time. First, I am new to the reproduction area. When I purchase things, whether it be guns or whatever, I try to get the best quality I can. I think we are all like this. I am not into CAS shooting but think its pretty cool stuff. I will be shooting casually...
by grahng
Sat Jan 23, 2010 5:02 pm
Forum: General Discussion
Topic: Uberti handgun question?
Replies: 16
Views: 1795

Re: Uberti handgun question?

Can we safely say that these days, the revolvers that Uberti/Cimarron are putting out are equal in quality and strength to a similar Ruger model?
by grahng
Thu Jan 21, 2010 7:41 pm
Forum: General Discussion
Topic: I need a good set of sights........and eyes, Rossi 92
Replies: 11
Views: 1839

Re: I need a good set of sights........and eyes, Rossi 92

Thanks to everyone for the great input!!