Paco Kelly's Leverguns.com

Eye-Bite!

Excellent product.

Eye-Bite!

Mescalero wrote:The co-efficent of expansion for modern alloyed steel is 13 millonths per inch of linear measurement
per degree of temperature departure from ambient.

One more long-neck and I would have said the exact same thing.

Eye-Bite!

I was all fired up to get this thing installed on my Browning 1886 SRC. I don't have a #21 drill bit and 10/32 tap, but I confidently mounted it with the tang screw and marked the spot for the top hole. Then I eagerly rushed off to town to purchase a #21 bit and a 10/32 tap. Four hours later I stil...

Eye-Bite!

Peep or Tang sight=Ok. Scope=UnTexican.

Eye-Bite!

It izz what it izz.

Eye-Bite!

Thanks.... Just ordered the Rag.........

Eye-Bite!

Your perspective is valued and respected, and will be shared. Many of the patients I see who most appreciate the U.S. are those who spent the first part of their lives elsewhere. The spoiled yuppie-kids are the ones who say how 'bad' it is here, and want to change it to a third-world socialist dict...

Eye-Bite!

Most will agree with you... and we like it this way too! (Except for the Obviously bias News)

Eye-Bite!

Addiction of any type is always a tough one. The first thing, as you have done, is to reach out and talk about it. Good for you. Try and take a negative and turn it into a positive somehow. Refocus your thoughts onto other interests to occupy your time. If you stick with something that takes up your...

Eye-Bite!

Touche!

Eye-Bite!

It does however point out that this has been done numerous times and published on the web and as far as I know(please correct me) no one has died or recieved a serious injury. I think we are all in more danger driving to the range than this. Or hunters getting snow in their muzzle. To think this ea...

Eye-Bite!

Nath wrote:http://www.theboxotruth.com/docs/bot50.htm

http://www.youtube.com/watch?v=TvWgz4Zvs_E

N.

1930 Vs 2013... Not relevant.
You Tube. Please read the Disclaimer on the video itself from the maker. Video is irrelevant also.

Eye-Bite!

They do a little more damage backwards! It's a boatailed flatpointed wide hollowpoint :) Hits like Thor's hammer I bet! Accuracy? Do a little more damage backwards! Can't afford the appropriate bullets? Wad cutters are an excellent choice for this instead of a possible safety risk. I bet you can't ...

Eye-Bite!

And when folk reverse thier car your opinion is? And when folk swage bullet jackets from spent 22 cases is that also all wrong? And when a patched ball rifle happens to shoot well sprue down is that all wrong too? N. :wink: When folks reverse their car.... It's because it's designed for that activi...

Eye-Bite!

Ok eye bite, you take alook at these, http://www.google.co.uk/search?q=wadcutter+image&rls=com.microsoft:en-gb:IE-SearchBox&ie=UTF-8&oe=UTF-8&sourceid=ie7&rlz=1I7_____en-GB&redir_esc=&ei=mkO7UdT8HKWK0AXNioBI and these, http://www.google.co.uk/search?q=boattailed+bullet+i...

Eye-Bite!

Another fine hunt, Nath, and thank you for sharing. I just had friends from Cambridgeshire visit and they were explaining just how much hunting opportunity there still is in many parts of England. They also told me there is a serious problem with over-abundant deer. Do you ever get to hunt them Nat...

Eye-Bite!

Wondering what the Paper Punch would look like on a target, considering it's aerodynamically flying backwards against the engineering.

Eye-Bite!

Excellent research and the Facts speak for themselves. Good Job and an Excellent post.

Eye-Bite!

Here is a picture of a Melatonin deer as I am told. We use to live in an area that held a small conclave of them.

Eye-Bite!

I use Laser Cast almost exclusively. Sticking to the Lyman or Suggested powder loads of the powder manufacturers, the bullets them selves are excellent. As far as the manual?

Eye-Bite!

Just talked with Cabela's this morning about my "Back ordered" set. Looks like it will be in that status for some time to come. 45-70 Brass is back ordered 15 weeks at the minimum and on into the unknown past then. Flea-bay here I come.

Eye-Bite!

bulldog1935 wrote:
Eye-Bite! wrote:I never-ever eat anything that is a product of China.
yes, and neither do the MDs that I know

bulverde? Nice town. Hoping to move to Corpus Cristi waterfront soon. Yes, China food products are HIGHLY questionable if not deadly at times.

Eye-Bite!

Been doing some research on these dies. Question, I plan on loading primarily Lead-sleds in my newly acquired Browning 1886. As an option, will these also load Jacketed bullets? Most posts on other sights suggest Lee or talk about another caliber rather than the 45-70. Any clarifications would be ap...

Eye-Bite!

Shoot and Shoot away... Enjoy what you have earned. Good job.

Eye-Bite!

After reexamining my newly purchased ammo... The crimp seems to be "Over Crimped". At the 2, 4, 8, and 10 O'Clock positions and evenly spaced to indicate so. I would guess that is is machine caused.

Eye-Bite!

Looks like a wee bit overcrimped, don't you think!! That is what grabbed my attention. Looks like someone pulled out all the stops on the crimping machine. You are correct. I will try and work my way that way today.... As I remember from yesterdays quick scan the crimp looked excessive if not the b...

Eye-Bite!

Thunder50 wrote:Looks like a wee bit overcrimped, don't you think!!

Absolutely!

Eye-Bite!

Here is a Photo of the 45-70 Goobermint, Winchester Ammo I just bought. These are the Worst of the two boxs.

Eye-Bite!

The local classifieds is selling "factory reject ammo" for 9mm and .223 for breakdown into components. Bullets, brass look good and cases are primed. I've seen factory seconds ammo, where there is a blemish or something, but what exactly is rejected ammo? Are the loads inconsistent or low...

Eye-Bite!

I never-ever eat anything that is a product of China. When I hear or read "Made in China" It reminds me of Harbor Freight. As the saying goes.... Never buy anything from China that has more than one moving part. (is this a political post?)

Eye-Bite!

Thunder50 wrote:Don't know about everyone else, but I have heard the report when I have fired at a game animal. Just doesn't seem as loud though

I hear it also, just not the Ear ringing penetration part we all know to protect ourselves from.

Eye-Bite!

There was a post the other day that said something to the effect that while out hunting that person didn't hear the rifle report. I have been saying that for years too. When I go to the range or just plain plinking, I always use hearing protection. Now, while hunting, it's a different story. I don't...

Eye-Bite!

Old Savage wrote:Clearly a quarter can't tell the date.

Eye-Agree! That is funny!

Eye-Bite!

Not the "NRA" we know and love http://upload.wikimedia.org/wikipedia/commons/3/3b/NewDealNRA.jpg New Deal NRA....."National Recovery Act".....The beginning of the end of a GREAT country.....Where all "Gimmi" programs started! We are now into the 5th generation of some ...

Eye-Bite!

A neighbor who knows I cast bullets gave me a couple coffee cans of Linotype a while back. I was mixing it with pure lead, a handfull at a time, when something happened to catch my eye. http://images55.fotki.com/v1603/photos/3/36012/69369/NRALinotype-vi.jpg Interesting find to say the least! Gun Ro...

Eye-Bite!

BlaineG wrote:
Cowboy Dies Causing Problem
I first thought of probate problems.....Who gets the horse....

Eye-Agree! That's Funny!

Eye-Bite!

I am no .30-30 expert but all of what I have heard from old hunters in the first person sounds like the last few posters. Now granted I live in Virginia and we mostly hunt Deer and Black Bear (wish we had Hogs here) no-one outside of those who worship the gun rags thinks the 30-30 lacks anything in...

Eye-Bite!

Do Eye see a ROLEX?

Eye-Bite!

The 30-30 has been around since 1894. Far longer than any of the exotic modern bullets people are fawning over. It is a proven game getter and it's only shortcomings are those who don't acknowledge it's abilities. The standard ammunition and components available for it have been refined and improve...

Eye-Bite!

Generally speaking, on the backside of the photo "Should" be a stamping of the Photo Studio.

Eye-Bite!

What most of us think just put to words. Thanks.

Eye-Bite!

Win94, I took a 1975-vintage Model 94, that looked like this: http://i88.photobucket.com/albums/k185/hagler1966/ReceiverBefore.jpg I sanded it, with progressively finer grits of wet-or-dry sandpaper, until I got to 600 grit. I then degreased it, and used Birchwood - Casey Super Blue on it. I applie...

Eye-Bite!

Wood repair is always a situation where whatever works best for you or what ever you are able to live with. There are many good repairs out there and the one that works is the one that suites your taste.

Eye-Bite!

when I was 7-8 years old my dad light it up and it scared the living Ticks out of me... Now I have it and won't go near the darn thing.

Eye-Bite!

Levers, Lead Sleds, and Single Actions revolvers..... a Marriage that was meant to be.

Eye-Bite!

casastahle wrote:

http://www.auctionzip.com/aflive.html?m ... B285&seq=2

Facts are indeed Facts!

Eye-Bite!

Technology(?) in search of an application.

The thought of a missed shot and the arrow(?) hits a rock or another solid object causing the Bhoolet to cascade off into the surrounding area! ....ok, time for a Coffee!

Eye-Bite!

Eye-Agree!

Eye-Bite!

Eye-Like it Too!

Eye-Bite!

Coffee and DHo-Nutts for ThEE and Millions for ME!!!

http://www.nydailynews.com/new-york/red ... bled=false

Search found 122 matches