Paco Kelly's Leverguns.com

edwardyoung

I traded into these in the last couple weeks and haven't fully bonded with them. Within a couple months, they will be really in or traded away. 44mag Virginian Dragoon http://pic20.picturetrail.com/VOL1584/6553559/12658939/361214417.jpg Pre-Kahr Auto Ordnance 1911. Trigger, grips, assorted internal ...

edwardyoung

J Miller wrote:Hmmmm, I've got a Davis Derringer in 32ACP that looks exactly like that except for the finish.
I wonder if the parts would interchange?

You gotta a link for that? I typed in the Cobra International and got something not gun related.

Joe

http://www.cobrapistols.net/products.asp

edwardyoung

I was under the impression that we had seperation of church and state in this country. Why is it the state CAN"T meddle in the church's business but the church CAN meddle in the states business? You just defined what Jefferson intended by separation of church and state. "Separation of chu...

edwardyoung

I use Brownells Baking Laquer. I think it's around 250 degrees, but need to check the label to be sure. http://www.brownells.com/aspx/NS/store/ProductDetail.aspx?p=20475&title=BAKING%20LACQUER%20LIQUID Checked the label, and the temp is 300 degrees for around 30 minutes. I wait for my wife to l...

edwardyoung

Nice color case job. Will you shellac/laquer that for a final finish or do something else? Yes, I'll dip it and bake it for about 30 minutes to give it a bit of sheen, and protect the colors. I should know, probably, but what do you dip it in? And, since I'm asking, at what temperature do you bake ...

edwardyoung

I mostly got a yawn form the Post Office.

edwardyoung

It's a miracle. He suddenly decides to reply to me, and promises to send the money. Thanks to whatever forces conspired to resuscitate him. I'll let you know if he doesn't follow through.

edwardyoung

Anyone from Orlando who might know a Greg Jewer from there. He posted a Single Six for sale on the rugerforum back in January. I agreed to buy it and sent a Postal money order. He cashed it and disappeared. Any info would be appreciated. Thanks

Edward

edwardyoung

I got a 9. I figured Switzerland was more armed than the US

edwardyoung

Make sure the takedown screw is tight.

edwardyoung

The obvious solution is sell the Spikehorn to me for $160. You'll have solved your dilemma, and you will have my undying appreciation. Don't think about the $200 you missed. It causes frown lines.

edwardyoung

1...2...3...4...5...6...7...8...9.....................

edwardyoung

Thanks for the replies. It is new in the box, so maybe it will get easier with use. If I cock the hammer before I work the lever, the resistance isn't there.

edwardyoung

I'm probably going to trade into this BL-22 tomorrow. I've had numerous Marlin 39's and have had to slick a few of them up without too much trouble. The mainspring must be pretty stout on this BL-22, as working the lever takes more force than I would have expected. Is that the nature of the beast, o...

edwardyoung

Str8man wrote:This is just the condensed version.

If you have the extended version written down, I'd like to read it. My email is in my profile. Thanks

edwardyoung

God bless you, Ji. Hang in there

edwardyoung

De nada. Just noticed the space between the dot and the com.

edwardyoung

www.pinoncanyon.com

edwardyoung

Henry McCann wrote:edwardyoung, Does the Rossi have a 24" barrel?

Yes. 24" barrel. The trade I had in the works isn't going to happen; so if you want it, let me know. If you have a 357 lever action rifle to trade, I might be interested. That is what I was working on with the other guy. Thanks

edwardyoung

http://pic20.picturetrail.com/VOL1584/6553559/12658939/341582433.jpg I have an early Interarms Rossi 45 Colt with a half-octagon, half round barrel. If I don't get it traded in the next few days, I would probably sell it to you for $500, shipped. It's like new in the box with the paperwork. It even...

edwardyoung

My deepest condolences, Doc.

edwardyoung

edward young....the greatest post i've read. I need to know, as everybody (well.....every single guy anyway) at work loves it and wants to know if you made these up. So where did you get them??? I wish I could, but I can't take credit for them. I saved them years ago when I saw them posted online. ...

edwardyoung

I think it's a regional thing. Here in the backwards South, I always hear it pronounced car-bean.

edwardyoung

Here's something similar I copied in the past. I was a little more bitter, then. I apologize to any who find some of them excessively coarse. If you think all men are pigs, expect to live alone when you get older. If you have 100 reasons to reject a man, expect to live alone when you get older. Prin...

edwardyoung

Testing 1, 2, 3

edwardyoung

What does a non-Californian have to do to transfer a gun into CA, now? Is it not the big pain it is being hyped as? Thanks

edwardyoung

Hey Joe,

Since I'm such a nice guy, I'll trade you my pre-safety, half-octagon Rossi in 45 for both of your 45 rifles. No need to thank me

edwardyoung

If I can scrounge the money, I'll buy one of Ruger's new 44spl Blackhawks.

edwardyoung

The rear sights are sometimes different on the non-walnut-stocked variants, too.

edwardyoung

Hey Doc,

Doc O'Meara posted that his email is back up.

edwardyoung

He just posted that his email is still down, and if you want to communicate with him do it here: http://disc.yourwebapps.com/discussion. ... ge%20Board

edwardyoung

what I do on my milsurps. lots of paper towels and get most of it off then hoppes #9 and more paper towels and elbow grease.in the summer here in tx you could just put in in a black trashbag and let it sit outside @100+ and the stuff will drip off :lol: it does work. pete Put cat litter in the bag ...

edwardyoung

I got mine a little younger. His name is Puppy.

edwardyoung

You are my hero. I wish I could do that - or was at least brave enough to try.

edwardyoung

Thanks, MM93. You may not have had a microgroove Marlin, but if you have, did you have a favorite cast bullet for it? Thanks. I'll keep you posted, Kid :mrgreen: Yes, I've had some Micro-Groove barreled Marlins, but never tried paper patched bullets in a MG barrel. I'd suspect that it would be even...

edwardyoung

Thanks, MM93. You may not have had a microgroove Marlin, but if you have, did you have a favorite cast bullet for it? Thanks.

I'll keep you posted, Kid

edwardyoung

Thanks. Will do

edwardyoung

I just got this Marlin 1895SS http://pic20.picturetrail.com:80/VOL1584/6553559/12658939/335907881.jpg and also just finished reading Paul Matthews' book, "Forty Years With the .45-70." He states that "the paper patched bullet is the ultimate in hunting bullets." At over $1/round ...

edwardyoung

Here is a terrible picture(it's the only one I have) of an old 12ga Stevens 335 I got for a song because the first 4" of the barrels were rusted beyond use. I had a friend cut it down to 19". Now it's a favorite.

edwardyoung

My 336 Texan is from '76, so it fit like a champ.

Glad you were able to conquer whatever demons were keeping you from posting on this forum.

edwardyoung

Got it today. Thanks again.

edwardyoung

Here's another one

http://www.hunter-ed.com/wa/course/2-7_ ... _lever.htm

edwardyoung

Thank you very much.

edwardyoung

If you still have it, I'd like it. Thanks

edwardyoung

You might consider how good it would make you feel if you boxed it up and sent it to me as a belated birthday present

edwardyoung

A guy at work brought me his laptop with this Antivirus XP 2008 on it. He didn't have his restore CD or any money for software; but I was able to get rid of it by downloading Super Antispyware. http://www.superantispyware.com/ It's a free download. Thought it might help someone.

edwardyoung

I believe a settlement between Winchester and Rick Jamison (sp?) concerning short magnums may have had something to do with Winchester closing their facilities in CT. Would you mind expounding a little on this? I've never heard this mentioned before. I know I may be the only one, though. Thanks Not...

edwardyoung

Modoc ED wrote:I believe a settlement between Winchester and Rick Jamison (sp?) concerning short magnums may have had something to do with Winchester closing their facilities in CT.

Would you mind expounding a little on this? I've never heard this mentioned before. I know I may be the only one, though. Thanks

edwardyoung

He's already said it

edwardyoung

I'm not the one having trouble. I just didn't want Terry's perfectly good setup hanging out there so long without a reply.

Search found 297 matches