Paco Kelly's Leverguns.com

Paul105

I have a 4" 10 shot 617-6 (not 317). Easy ejection and accurate. Individual guns will most likely influence accuracy and or reflect build quality more than dash numbers. . Here's a couple of targets - first is 25 yds and 20 shot one is at 100 yds. . https://photos.imageevent.com/paul105/hobby/l...

Paul105

Freedom Arms Model 97 3 1/2" 45 Colt wearing the 45 acp aux cylinder.
.

.
Paul

Paul105

A while back I was faced with the prospect of being unable to reload. I didn't mind the idea of being limited to 22s but wanted to shoot centerfire as well. 9mm was the least expensive factory ammo by quite a bit, so I bought a S&W 986 - 7 shot L Frame. Here's a picture I poached from another we...

Paul105

20" Marlin
17.0gr 2400
250gr Leadheads "Keith" CSWC
5 shots
5 long paces from muzzle
70 Deg F
1,492 fps

Paul105

I've had two 1. Bought 3rd Qtr of 2005 sn MA0 7310 - Don't remeber config (i.e screwed in mag tube, loading port or Knurled/Screwed In mag tube insert . 2. Number 1. above replaced in 2nd Qtr of 2007 - S/N 18268 - Mag tube screwed into receiver, loading port, and screwed in/knurled mag tube insert, ...

Paul105

hfcable wrote: ↑Tue Jan 13, 2026 11:39 am for comparison here is my stevens 425 in 35 remington:

.
you definitely have some NEAT STUFF. Love your posts!

Paul105

Brekinridge - don't even have to get off the lift for the ride of your life.

Lot's of strong wind here in MT also. Trees down across power lines etc. Never saw MPH although I'm sure it was reported on local news.

Paul105

My 24/7/365 companion for a dozen + years with a fresh shed she found on one of our daily walks.
.

.

Paul105

My favorite hunting stories involve youngsters (and dogs). Congratulations young man!

Paul105

Just turned 12 grandson packing out his first bull elk.
.

.

Paul105

Thanks Jim. Went the website and saw the recommendation by Mark Hargrove. Bought my first Freedom Arms M97 from him back in 2006 (wow, can't believe it was almost 20 yrs ago). Always enjoyed your stories - so two recommendations I value. I'll be subscribing That FA97 45 Colt . https://photos.imageev...

Paul105

Here's a CW40 (poly frame the same dimensions as the 9mm) . https://photos.imageevent.com/paul105/hobby/large/cw40%20thumbnail_IMG_5367.jpg . It's gone a lot of miles in my pocket in this rig . https://photos.imageevent.com/paul105/hobby/large/CW40_%20CCW%20pocket%20thumbnail_IMG_5368.jpg . . . I ac...

Paul105

You have the neatest stuff. Always enjoy your posts.
.
Paul

Paul105

JimT wrote: ↑Mon Jun 16, 2025 7:45 am I shot them quite a lot in my Old Model River 357 single action revolver. They shot well, were accurate and seemed about like a lower end 357 load.

.
Did you have a 38 super aux cyl or?
.
Thanks

Paul105

Is that the same alloy that Freedom Arms uses?

Paul105

I lived in Trinidad CO, just a quick trip from Whittington. We would go down once in awhile and shoot. If you are in the area during the week and have time go up to the college and take a tour of the gunsmith program. Local kid John McGlothlin (Spelling?) graduated from the gunsmith school in or ab...

Paul105

I lived in Trinidad CO, just a quick trip from Whittington. We would go down once in awhile and shoot. If you are in the area during the week and have time go up to the college and take a tour of the gunsmith program. Local kid John McGlothlin (Spelling?) graduated from the gunsmith school in or ab...

Paul105

Must be a lab thing. Willow with the fresh shed she found on one of our daily walks.
.

.
Paul

Paul105

Doing a little load development - got sidetracked and need to get back at it. . .44 Mag Chiappa Wildlands . https://photos.imageevent.com/paul105/hobby/IMG_6317.jpg . Gonna give these a try when the weather gets better. . https://photos.imageevent.com/paul105/hobby/400gr%20subsonic%2044%20mag%20cart...

Paul105

Maybe they can make it like this:
.

.

Paul105

I quickly scrolled thru above posts but didn't see this article by Paco.
.
https://www.gunblast.com/Paco_Legacy_454.htm
.
Paul

Paul105

Very nice rig!

Sign up on Rob's email list. He has some really nice stuff discounted 20% in his "Gear to Go" area. I have picked up half a dozen holsters there over the years. Here's one.
.

.
Paul

Paul105

Paul105

Been following your posts re Sage from the beginning. This post (rodeo pheasant event) reminded me of one (of many) good times we had with Willow over the years. Rescued her when she was 10 months old. Wild as a march hare. Daughter wouldn't stay home alone with her (she would relentlessly moon walk...

Paul105

Bought this "trade in" (g22 gen 3, 40 S&W) several yrs ago. looked new. Shown here with Advantage Arms 22 conversion (40 S&W top unit and mag in middle) and my vintage K22. The older I get, the more I shoot 22s. Also have KKM 9mm/40 conversion bbl and 9mm glock mags (100% reliable ...

Paul105

Here's one that has been modified ala Jim's suggestion: . https://photos.imageevent.com/paul105/hobby/IMG_0492.JPG . Bought that war surplus 1911 Rem Rand back in the mid 60s. It was in a pawn shop. When I asked to see it the owner pulled it out of the display case, inserted a magazine, jacked the s...

Paul105

looks a little bit like Clint Eastwood

Paul105

I bought a Tactical Innovations (Idaho) a 16.5" 1-9 twist Ruger 10/22 bbl. The 60 grainers shown in Jim's post averaged 880 fps at 5 long steps from the muzzle and 60 deg F for 5 shots in that barrel. My notes indicate normal function and half inch group at 25 yds (with scope). Still have sever...

Paul105

In Harm's Way - one of my favorites. "How far can I go" -- response "You can't kill him".

Paul105

Jim,

What, if any, bullet "jump" did you experience with lubed bullets?

Wonder how powder coating would work?

Paul

Paul105

Scott, that double gun is really cool!

Paul105

What could possibly go wrong?

Paul105

Sorry, a couple of hours east.

Paul105

Any of you guys take the plunge for a FA .500 Wyoming Express? I thought that would be cool but a .44 mag kicks plenty for me :D Not a Wyoming Express but the ballistic twin (500 JRH). This is an FA83 converted to 500JRH by Jack Huntington. . https://photos.imageevent.com/paul105/hobby/500%20JRH%20...

Paul105

I have the twin of Jim's but obviously without the inscription and engraving. . Here it is with the 45 acp cyl (pretty much permanently installed). . https://photos.imageevent.com/paul105/hobby/IMG_3236%20-1.jpg . And with the 45 Colt cyl shown with 386 L Frame .357 for size comparison. . https://ph...

Paul105

I'm sure it must have been addressed but I haven't seen it -- WHY WAS THERE LIVE AMMO ON SET and who brought it there?

Paul105

Scott, what are you going to use as a host? What is your intended use. Just curious as to what others use theirs for. Thanks, Paul Paul, I own a number of suppressors. This particular one will be used on a little bolt action.300 Blackout. I reckon I’ll shoot whatever from hogs to deer to varmints w...

Paul105

Scott, what are you going to use as a host? What is your intended use. Just curious as to what others use theirs for. Thanks,
Paul

Paul105

I have one of the 66-8s. Decided to test some loads using by then new Labradar. . Labradar Muzzle Velocity (familiarization run) 60 Deg F S&W M66-8 2.75" .357 Mag 130gr Fed Hydra-Shok JHP "Personal Defense" PD357HS2 H …….. 1,416 fps avg (84 fps ES) -- two rounds 140gr Underwood Xt...

Paul105

I have a FA757 (orig designation for 475 LB) that I bought used. Don't know how many round orig owner shot, but I put a little over 15,000 rnds thru it and towards the end started chasing point of impact and rear sight looked like picture above. Turns out the barrel was unscrewing under recoil. Barr...

Paul105

Speaking of Sanderson brought back a memory. 35 plus years ago, my son and I were sitting on the side of an arroyo outside of Sanderson TX. We were mule deer hunting with a group of other hunters. Others were set up at various locations. We spotted a single javalina wandering down the arroyo. My son...

Paul105

First off let me say that I'm real lazy and anything that reduces effort is a plus for me. I have two RCBS Rock Chuckers (one was bought as a backup). The original is set up for use with the Loc n Load bushings and I really like them. Also, they can save some time if you're only loading a limited nu...

Paul105

Back when America was free and the FBI didn't harass people for speaking their minds, we kids carried our .22 rifles around openly and hunted with them, had them on our bicycles and no one freaked out about it. We didn't shoot each other or anyone else. The guy at the hardware store sold us .22 she...

Paul105

I shot this target sandbagged at 25 yds with a 4 1/4" S&W M69 .44 Mag. Two shots per load to limit recoil fatigue and reduce target clutter. Point of aim was the same for all groups (center target diamond). I'm sure different guns, calibers, loads would show different results. . https://pho...

Paul105

I've ordered a fair amount over time and always received products. What Jim T said above -- It takes a while so be patient.

FWIW,

Paul

Paul105

Bought this from Mark Hargrove 17 yrs ago. It has always been one of my favorites - 45 Colt/ACP.
.

Paul105

I've had a 6" "field grade" M83 since the late 80s or very early 90s (can't remember but it only cost $900). It is one of the most accurate revolvers I've had (along with a M97 .44 special). . https://photos.imageevent.com/paul105/hobby/large/FA83%20454.JPG . FA makes great stuff but,...

Paul105

Grizz

Recently acquired some 330gr lead flat nose powder coated projectiles but haven't loaded any yet. Plan on starting with 8.5 gr of HP38 and see whats what.
.

.
Paul

Paul105

I just calculated a 440gr 50 caliber at 850 fps - 26.7 TKO. I no longer have any use for this gun (and can no longer handle heaver load recoil) but like it so much I just can't part with it. It's a Freedom Arms M83 converted by Jack Huntington to 500 JRH. Bought it used 10 yrs ago when I was going t...

Paul105

I don’t want to appear to be complaining. I’ve owned this machine for more than half of my life. It’s been a great help to me and if I had to, I’d buy another one just like it! Never entered my mind. Only wanted to add that in my experience, high useage mechanical things can and do break. I've even...

Search found 235 matches