Paco Kelly's Leverguns.com

DON`T DO IT !!

77,, and yes the holes are there in the pic.

Enjoy!!

Bruce, if that rifle is still in the planning stage, why not use an 8mm barrel? I did on my Ruger #1 .32-40 and it is a great shooter with cast bullets from my NEI mold. I size .323 and breech seat for groups well under .500 when I am doing "my part" as they say.

A problem with any ML rifle under .40 caliber is the loading rod. My .40 cal Kentucky has a 3/8" (.375) Hickory ramrod. Any smaller bore will use steel or fiberglass rod or you will have a problem finding a quality wooden rod. Also .40 cal is the smallest ML legal for deer in WA state. I know o...

Sure hope they make one in .30-30!

Tom is right, Used to have to hunt for them, Win. shut down and they are all over the place.

Joe, Make sure there is no electrical device near the scale that could cause a magnetic field like a motor or electric dribbler or lube heater or such. I find that simple is best with scales and your old Redding oil dampened scale is a good scale. My dad and I used the same one for many years withou...

I understand if ya jerk the trigger real hard ya can get a little more velocity out of them magnums!!

Sounds like a bolt to me too!
"Dang, It was hittin right on last year "!

( just had to outdoo Nath!)

It works differently in different guns BUT. I find the lighter bullets at high speed will shoot lower than say a 300+ bullet at 12-1300 fps at short range due to the barrel recoiling up more before the bullet leaves the barrel. Now at longer ranges the slow heavy bullet will start to drop quicker th...

My first was a Win low wall in 32-20 I traded a bolt action 20ga. for it in about 1959 (wish I still had it, sold when we moved west, my dad said it was not legal for deer out west) :cry: My second was a Marlin 336A .30-30 my dad bought me to replace the low wall in 1961. :wink: I killed 6 does with...

Welcome !

And what the other guys said +1.

Cant beat that!

That #1 is NICE!

I went through mine over the Christmas week (vacation) I found 53 in my safes.

I dont reload to save money, I do it cuz I enjoy it and the greater accuracy is just a bonus!

YUP !!

COOL !!

Welcome!!

I like mine! :D http://i31.photobucket.com/albums/c356/chuckleininger/31Rugercustom1022riflesn247-19699.jpg http://i31.photobucket.com/albums/c356/chuckleininger/31aRugercustom1022riflesn247-19699.jpg Great shooter!!! :wink: PS. the Fajen English Walnut stock with Neidner steel butplate and pistol g...

Big Bore , I was thinking the same thing.

Welcome!

The Douglas barrel on my .32-40 will handle 180gr cast very well at
1 in 14 twist. It is a .323 (8mm) barrel and I shoot the same bullets sized the same in my Win. 94 32sp. but those bullets are barely stable at 16-1700 fps. so I`d guess it`s 1 in 16" twist.

Mine all have names. Some are Marlin, some Winchester,Ruger etc.

As I wrote over on cast BOOLETS, I stick with the factory part.
Heck, a bear would have to chew clear through the receiver to get to the ejector! I think the standard one would be safe from bears.

Lee Liquid Alox. aka: LLA

The next one UP is .500

That would work for the Marlin Cowboys.

I clean at the range and when I get home I pull them out of the case and wipe and they are ready for the safe. :wink: If going hunting within a few days and I am checking zero, Like Marlinman, they just get wiped off on the outside. I like to get to know what my rifles do with a clean bore for the f...

I have the .343" tall one on several Marlin 336`s with the Williams and Lyman receiver sights.
Measure the front that is on your rifle now to see what it is and replace with the closest size.

Fine! Just Fine!!

azoil, Howdy! LLA works good on just about any bullet design I have tried it on.The tumble lube bullets do put more lube close to the bore than those deep lube grooves do but you can lube them more to get more on. Take a look at Lee`s site to see more tumble lube designs from Lee. Most of them work ...

Very nice rifle! Yes it came with a hood. The older ones were round not the oval wide view hoods of today.
I bet it is a great shooter. I have SC`s in that condition in .30-30 and .35Rem. I will find a .32 sp.some day.

Marlin does not recomend Blazer ammo for the marlin 1894`s and they say don`t use them in the operator manual. I understand CCI is now making brass cased blazers so that may have changed. I do not think FMJ ammo in a tubular magazine is a good idea either. For what its worth,my 1894 .357 feeds just ...

Very nice! Congrats on the luck of the draw!!

SWEET , I gotta get me one of them!

Welcome back!

Nothing wrong with that!

Looks like your guard dog likes your 94.

Looks like he could take your leg off iff`n he wanted to.

I use one of the old RCBS ones for most everything but my BR rifle. I have a custom made tool set just for the 6MM BR.

Hydrogen Peroxide, The pure stuff is ROCKET FUEL ( highly explosive) My dad hauled the HP fuel that Craig Breedlove used to fire the blue flame to a new land speed record. It is/was made here in Vancouver WA. by FMC corp. The brown bottle stuff found in the local drug store is only about 1-2% concen...

KirkD , You are right. It would take a lot of rubbing to do any damage to a barrel with steel wool. I don`t see a problem with it on modern barrel steel and have done exactly as you describe.

Yes, Win. made some SS barrels as far back as the 30`s IIRC.

NEET!!

Each state has different laws on gambling. Our gun club maintains a WA. state gambling license just so we can sponsor raffles at the Friends of NRA banquets. It costs almost $1,000 a year but the returns offset the cost of the license.
An auction is the best way to go.

Joe, You can use a white painted wall. As long as there is nothing there for your eye to try to focus on. You should be looking at the cross hairs only.

I agree with Homefront and Scott. The .243 is NOT acartridge known for high level of erosion and with common load levels should last for a couple thousand rounds before accuracy goes down the drain. There are a couple of Benchrest guys I know of that set their barrels back and rechamber every 2-300 ...

I had 2,335 , but who`s counting. Same good old boys.

Don`t do nuttin on mine.

Very nice!!

Search found 6860 matches