Paco Kelly's Leverguns.com

dkmlever

https://www.gunbroker.com/item/902957824 You all can look at the pictures and see the condition and asking price. It is close to me so I can go look at it, but my concerns are, the short forearm, and the hammer only has horizontal cross hatches on it not the two way pattern. Could it be that someone...

dkmlever

I just ordered a fully carved holster, matching carved mag holder and matching carved belt. They showed up well before I was expecting them and they are very nice!

dkmlever

I had thought about buying a new rifle this year in a new caliber for me, but after seeing how tough ammo is to buy the heck with adding anything new, I have enough of a stash for what I currently own. Just out of curiosity I went to midway USA and searched for 30-06 ammo. 116 types EVERY SINGLE one...

dkmlever

Joe,
I am not a new member been on this board for quite a while, just don't post much.
I deleted the ads since there seemed to be no interest.
Tell me what you interested in and I'll make you a deal.

dkmlever

Thanks to all who responded and gave advice.
I usually do hunt with different ammo than the Hornaday, and all other ammo i have tried has fed fine. I can use the Hornaday in my Ruger #3
But if I wanted to change the magazine follower, where do I get the new style and how hard is it to change out?

dkmlever

I own a Marlin 1895S made in 1982 (no safety) 22" barrel with micro groove rifling. I tried some of the Hornady Leverevolution ammo 325 grains, they just don't feed well. As I pull the lever up to load the chamber the ammo "sticks" so I have to lower the lever slightly then it will fe...

dkmlever

Shot my cow moose here in CO with a old Marlin in 32 Win Sp, 153 yards down and out.
http://s26.photobucket.com/user/dkmleve ... 6.jpg.html

dkmlever

For those familiar with Browning A-5 shotguns, they have a mag disconnect to easily unload the chamber or change the type of shot shell in use. Just wondering why the lever guns don't have one. It would have made it easier when taking the round out of the chamber to be legal when in the vehicle or o...

dkmlever

I'm in Estes Park, CO you're welcome to swing by, then head west via Trail Ridge road, pretty route.

dkmlever

I have owned a Marlin 93, in 32 Special for 30+ years, carbine 4 digit serial number great shooter made as best as I can tell mid 1920's. I just bought a Marlin 36A flat bolt made in 1947 same 32 Win Spec, Besides the length of barrel and one is case colored - one is blue, what are the differences b...

dkmlever

Here is mine not for sale made in 1915 very good condition.

dkmlever

Here is the very first target I shot with my savage 99 EG in 300 Savage made in 1950. Open sites and reloads, the squares are 1/2 inch in size.

dkmlever

I love antelope meat butt does my wife, favorite by far.
Yup, the key is quick field dressing and skinning. Throw it on the grill and leave it med rare. I've killed about 70 or so and all have been good.

dkmlever

Thanks, think I got it using this new site, see new classified!

dkmlever

I am fed up with photobucket, arrggg
So what other sites can I use to copy and share pictures to the classified section of this or other forums?

dkmlever

I would not have believed it but it happened. Out on a hunt this week with my buddy who loves pickles. He brought a whole jar of dills with him and they spilled on the back seat of my truck....right where my rifle was laying. Well pickle juice takes the blueing right off your rifle! OOPS, lesson lea...

dkmlever

I owned the Honda portable winch that ran on gas, with a capstain type system so as long as your rope was, you could tie on to something and winch it back. easy to secure to a tree, or a ball hitch, I spend the little extra to get Kevlar rope. These are not he fastest winch, and you must hold the ro...

dkmlever

I am looking for a Marlin 45-70 with the 22 inch barrel and 3/4 mag, pistol grip, NO safety, NO checkering......if you have one or know of one, let me know!

dkmlever

looks like a nice knife, just watched a review on youtube, I like the non striped - all black blade so got one from amazon on the way....

dkmlever

Just a quick note to say Thanks to Jack aka Sixgun, who I asked for some local knowledge and he took the time to respond, via e-mail and phone call. We did not have time to meet due to my schedule but Sixgun gave Great advice which I used to solve the issue I was dealing with and was much appreciate...

dkmlever

Marlinman....let me know when you want to part with that beautiful knife....!

dkmlever

Not in 44 mag, but tried it in 45-70 out of my Ruger #3 very tight groups. Bought some in 32 special but have not tried that yet.

dkmlever

Ok #2 and #7 got taken the rest goes off to the local gun store , no longer available.

dkmlever

2571 - Yes, #7 is yours no need for a sase, my gift.

dkmlever

Used with the a #1, to center the flash hole reamer into the case mouth. This one is for a 6mm. You would need the handle and reamer (see #1) then you slide and use a set screw to tighten the pilot onto the reamer. The reamer is used to clean out and round out the primer flash hole inside the brass ...

dkmlever

#2 is gone.

dkmlever

Karma give away. If you need any of this stuff, let me know what number you want via a PM with your mailing address, post "i'll take it" here also to avoid conflicts and it is yours. I'll mail it in padded envelopes asap. http://i26.photobucket.com/albums/c130/dkmlever/1958a9e5-6456-407f-b...

dkmlever

Pete,
Thank you so much for the info, wonderful history.

dkmlever

These came from my dad, he was not a pilot but did serve 4 years in the India during WW II (where the China Burma conflict was going on I think)....he brought these two leather emblems home and they have been in storage ever since. What are they, how were they used and do the have any collectable va...

dkmlever

Just bought a new 1 in 12 twist rate 308 rifle (barrel is 22 inches long). I have not even received it yet, but am wondering at that twist rate, which bullet weight would be the most accurate?

dkmlever

I bought a used Browning Citori, that the lower barrel ejects the spent shell but the upper barrel only extracts the shell. Is there a way I can make it so both eject or is this a broken spring inside somewhere?

dkmlever

Best of luck, you are right the forecast for the first half of this season is not good for hunters.
I would hang out on the North side in the deep timber to hopefully see one.
Shoot straight with whatever you use!

dkmlever

Thunder50 is not interested at this time so I thought I would put up the info I had on this rifle Ruger #1A 30-30 one of 250 from Lipsey has the certificate of authenticity, and all other paper work, box etc Currently it has a Burris 4x Mini mounted with the Ruger rings At one time it did have a rec...

dkmlever

There is one at my local gun for sale, let me know I plan on stopping by on Saturday and can get you a price.

dkmlever

Yes, the DOW and I both thought it was 1 1/2 years old not this years calf but last years. My buddy who's bull he killed the day before was significantly bigger! I wanted a young one as it will be better meat, tender and less of it! I took a nice antelope buck three days after this moose , and still...

dkmlever

Love that 35! Send it out to CO and I will promise you I will take it hunting!

dkmlever

Thanks all for your comments. I am lucky that I live in a state where you can apply for a tag for elk, moose, bear, antelope, deer, big horn sheep and MT goat. The DOW here allows you one bull moose tag in your lifetime which I had 6 years ago which I filled using a rifle with a carry handle. Then y...

dkmlever

Thanks guys, very glad I could do the hunt in style, had an opportunity shortly before this cow showed up on a long 250+ yard shot (thought about borrowing my buddies rifle to make it...) glad I passed on that one to use the Marlin. I used the standard Winchester 170 gr round nose factory ammo.

dkmlever

Colorado moose hunt for a cow, used my 1920's Marlin 93 in 32 Win Spec, 134 yard lung shot, bullet recovered on the far side of the hide.
Who says you need the fastest wiz bang cartridge to make meat!

dkmlever

Once coming out after dark with my buddy, both of us were loaded down with yearling does over our shoulders- head down - long day, tired, we saw we were the last vehicle in the parking lot. As I got closer to our truck I stepped over a rifle laying in the dirt, called out for my buddy so he could se...

dkmlever

Going goose hunting on Super Bowl Sunday, geese will die in the air that day, the Seahawks will die on the ground....Broncos by 10+

dkmlever

Been looking at one of the Stalker versions for goose and duck hunting....I like it a lot, all the reviews I have seen and videos on youtube, looks like they got it right!

dkmlever

Guys, I have an opportunity to go goose hunting soon and need some advice. I only own one 12 gauge shotgun - an Ithaca Mod 37 pump, 28 inch plain modified choke barrel made in 1956. Can I use steel shot in this shotgun safely? I bought this gun used when I turned 16 which was 44 years ago, would hat...

dkmlever

Sweet high grade, are you going to shoot it or just leave it as a safe queen?

dkmlever

Yup, I struck out also, most of my group got what they wanted...except me. Decent left over tags available

dkmlever

Looks like sixgun's basement!

dkmlever

Very nice, look out at the BBQ someone is toten a nice one!

dkmlever

Sounds like a deal to me!

dkmlever

Thanks guys for the advice. I will walk this gun around the Colorado Collectors show May 18-19 and sell it....unless someone here wants it....

dkmlever

My buddy who has asked me for my help, wants to sell this rifle but I have no idea what it is or the value. Any advice is appricated. One barrel is modern and is chambered for 357 mag and has a hi-viz fron site, the original barrel is marked 32 WCF. Sorry for the poor pictures, let me know what you ...

Search found 534 matches