Paco Kelly's Leverguns.com

Tycer

I saw that. That’s a serious wtf.

Tycer

We’re thinking about going to San Antonio for the Annular Eclipse next year.

Tycer

On 4x4 I usually go as skinny as possible while maintaining a similar rolling diameter. I’m never in deep sand or deep mud so don’t need the width for off-road. The Taco came with 245/75-16 so I run 235/85-16. They have a slightly larger rolling diameter. Hooking up on a straight track or scca calls...

Tycer

But as a knife user, I will always choose a knife blade made with "single layer" steel like ATS-34, BG-42, 154CM, or even the stainless (stains less - no steel is corrosion proof) S35VN steel. I’ve used a lot of steels. I always seem to love a well tempered 154CM for a great balance of ha...

Tycer

a discount tire guy who offroads recommends goodyear duratracs, anyone have experience with them, or have a better tire choice. so many options, so little time . . . † I had been running Firestone Destination A/T on my Taco since new(2006) but switched a couple of years ago to the Destination X/T a...

Tycer

Excellent. Living the good life. Thanks for sharing this.

Tycer

Thanks

I needed this.

Tycer

That’s great Lenn. Thanks

Tycer

Artwork on my shop wall. A friend makes these and othe art from vintage memory.

016C568A-7B10-413C-AAB3-BEC9075A6DA6.jpeg

Hand woven

A268CE04-A656-4354-8C65-9A31766AFA2D.jpeg

Tycer

Whew!

Tycer

Talk to a jeweler ( a real Jeweler, not just a salesman) it might be plated at reasonable cost. Alternately, if it is just the lower tang, polishing and reblueing would not detract from the overall appearance. . Thanks The receiver material as I heard is sintered steel which doesn't take bluing ver...

Tycer

I tape them, stand them on end and using a properly sized block to lay the saw on I use a fine jamb saw to make the cut. I cut from all sides and finish with the middle. This is the type of saw: https://a.co/d/3dlx2ZH

Tycer

We had a thread showing our benches but most of the pics are gone. I have a friend who’s getting into reloading and thought I would share some ideas. His current dwelling is somewhat space limited.

9892B043-B4FD-43E9-90CF-DA5D469EEE41.jpeg

Tycer

Well, the rim size is the same. OAL is the same. My guess is they’re interchangeable.

Tycer

My prayers are with them. It’s about to get much much worse for them. This brinksmanship has unleashed the dogs of war. Surovikin is about to turn Ukraine into Syria. This is terrible.

Tycer

I had a local furniture shop chemically strip it in their chamber * for only $50 and it came out great.. Old No7 * I learned the hard way many years ago on a BLR .308 not to try and strip/refinish a HARD Browning finish on my own... Ended up replacing the wood... :o ( Click image to enlarge ) Citor...

Tycer

* Update * Posts over on the Shotgun Forum have convinced me to fill the pores more before I finish it up -- I will start a new "Part 2 Refinish" posting once I make some more progress on it. I'm happy with the stain color and sheen of the finish, but the pores do catch a lot of light... ...

Tycer

Excellent news.

Tycer

Beautiful. All the way around!

Tycer

I was at a car show this Saturday, held at the Maryhill Museum in Washington. About 100 miles from home for me, but a beautiful setting in the park. At registration they had a schedule of events, and it said at 12:00 noon the hill climb course for the Maryhill Hill Climb would be open for any car s...

Tycer

I don’t seem to be able to post images in messages. Here’s what I was talking about.

881C8CF6-038C-4407-B6EC-01E79FA04879.jpeg

Tycer

Excellent!

Tycer

[ Sounds like it's best to just slow down and watch the road ahead. Unless you take a navigator whose really good at calling out turns and how tight they will be. Last time I went it was a Wednesday not during leaf season… This time going slow shouldn’t be a problem. There’s more than 350 registere...

Tycer

I finally got around to watching it. Great suggestion. Thanks 🙏🏼 Tim Blake Nelson is Avery good actor. I rented Old Henry tonight...not bad! I liked it, and generally agree with the industry rating of about 7.7 out of 10. I don't want to give anything away, but found it interesting that a few charac...

Tycer

Perp had 300 BO, a .223 and a .45. Anybody missing those?

Tycer

looks like a great run. my garmin will post up a notification that's more distracting than useful. I do use the road itself on the gps to see the turns coming up, but only when I have the gps mounted so it's in my scan like a hud. in new truck I the gps is out of my scan and i have to be careful. I...

Tycer

Can't imagine driving on curvy roads in a spirited manner and keeping an eye on anything but the road? We’re going back to US129 and there’s so many curves I forget where I am and which curve is next. 00F1A80B-93A5-45EC-8108-B95564EEF0DB.jpeg Look for the fine yellow line above the river. 86926985-...

Tycer

Hey Chris! Glad to see you’re still kicking buff.

Tycer

For those of you that like to ride or drive spirited, what iPhone map app gives you the best view of upcoming curves?

Tycer

... I love poetry, long walks on the beach, and poking dead things with a stick.

Well there ya go

Tycer

Oh my. A ported 357?
Oh my.

Tycer

Scott Tschirhart wrote: ↑Sun Sep 18, 2022 4:35 pm They were in my deer blind.

What purpose does your hunting serve? I thought they were good mousers and not much of a nuisance. Pelts?

Tycer

CowboyTutt wrote: ↑Sat Sep 17, 2022 4:17 pm I'm not so much into that cartridge, but that is a -Tutt

Ohhhh. I am. My favorite cartridge of late. Remington 25, Browning 53, and Ruger Blackhawk.

Tycer

E23DD983-0301-4DBE-871E-E62B6B53BAA5.jpeg F3949904-C0D8-4D36-8936-F46D4D671DBE.jpeg E12D7C45-A895-4CAA-B8F2-B5CE39A9BD74.jpeg D0937ABD-C48C-41AD-A5C7-D18BBB8713D6.jpeg So it's the weight of water used to push it past a one way valve when the flow shuts a flap on the large volume side, or have I got...

Tycer

Got the water ram out today had to see it run again. :) https://www.youtube.com/watch?v=Hmlmh8iO7N4 Could that pump water back to the tank? Sort of perpetual motion? That particular pump is probably 60% efficient so 40% of the supply is used to drive the pump. Given sufficient head and flow that pu...

Tycer

Good news.

Tycer

Nice. Looking forward to the range report.

Tycer

There’s always the Taurus Model 62LA or LAR. Nancy has a blued one. Very accurate and light action. Maybe one year of production.

Tycer

Blaine wrote: ↑Mon Sep 12, 2022 1:27 pm
That's what the Sportsmen's Range on Ft Lewis uses.
Thing is, the person sitting on the other bench will throw off your shot any time he moves whatsoever.
I have no idea why the Range Officer puts two people on one of those.

Tycer

Following

Tycer

Welcome!

Tycer

This was in the trunk of my JDM Honda Beat.

2A6603DF-3785-4CCD-A8EA-97AED9FC1531.jpeg

4718F1AB-7B5C-4411-BD62-84D167408C5E.jpeg

Tycer

Travel well Queen Elizabeth. Godspeed. Thanks for making our world a better place. Heal well all who mourn her passing.

Tycer

Excellent!!

Tycer

8A665910-89B1-4DA4-9DF1-B66A276CEFE2.jpeg

From this article on a shrinking lake that covered Whisky Flats:
https://www.sfgate.com/centralcoast/art ... 415393.php

Tycer

No hurry on that mold. I have no intention of using it anytime soon. I have enough loaded and cast to last me a while. Especially since I am busy playing with loads in my Browning 53 32-20.

Tycer

Thanks! That’s good stuff. His Kentucky Ballistics near death experience was a good watch too!

Tycer

I’ve got Miroku made 1886 EL 45-70, Browning 53 32-20, and BLR Takedown 358 Win. All are good machines with nice fit and finish. Did Steve’s Gunz details on the 86 and 53 and had the trigger worked on the BLR. Would prefer oil finish but the gloss is super durable.

Tycer

I did have a 357 AE that I had to square up the claw on the extractor. Couple of touches with a fine file.

Tycer

I have a Gould mold I can loan you

Search found 6503 matches